Assembly Guide

USER GUIDE
GET HELP WITH IT
Help is just a click or phone call away.
If you have questions about your it
™
bed or SleepIQ
®
technology,
go to itbed.com/setup or call 1-877-252-7813
121983
©2016 Select Comfort Corporaon
8/16 207512
SLEEP NUMBER, SELECT COMFORT, SLEEPIQ and the Double Arrow Design are registered
trademarks and IT is a trademark of Select Comfort Corporaon.
iTunes Store is a registered trademark of Apple Inc.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon. To comply with the FCC RF exposure compliance,
no change to the antenna or device is permied. Any change to the antenna or device could result in the
device exceeding the RF exposure requirement and void a user’s authority to operate the device.
For LPM-11000B (Valve Box)
To comply with FCC and Industry Canada RF exposure limits for general populaon/uncontrolled exposure,
the antenna(s) used for this transmier must be installed to provide a separaon distance of at least 10mm
from all persons and must not be operang in conjuncon with any other antenna or transmier, except in
accordance with FCC mul-transmier product procedures.
For LPM-11000 (Power Supply)
To comply with FCC and Industry Canada RF exposure limits for general populaon/uncontrolled exposure,
the antenna(s) used for this transmier must be installed to provide a separaon distance of at least 60mm
from all persons and must not be operang in conjuncon with any other antenna or transmier, except in
accordance with FCC mul-transmier product procedures.
WARNING: Read all instrucons before use to avoid injury and reduce the risk of burns, re and electrical shock.
Improper use of product can result in serious injury or death. Follow the safety informaon in this product instrucon sheet.