User's Manual

ManualsBrandsSleep Number ManualsElectronicsAdjustable Foundation Remote

Remote Control Function

A Low Battery

If low battery indicator is lit up, batteries need to be changed.

B Remote Troubleshooting

Pressing and holding both Head Massage Down button

and Foot Massage Down button for 3 seconds will force

the remote into a self-test mode. If LCD displays either “1”

or “2” error code, the remote needs to be replaced.

1 – Radio error

2 – Battery circuit error

C Position Timer

Press to set the current position timer in 15-minute increments

up to 180 minutes. Once it reaches 180 minutes, the next

increment goes back to 0. Once timer has expired, the foundation

will return to the ﬂat position. If a position other than ﬂat is

desired, press and hold Custom Preset 1 as you set the position

timer. Once the timer has expired, the foundation will return to

the Custom Preset 1 position.

D Massage Timer

Press to set the current massage timer in 15-minute increments

up to 180 minutes. Once it reaches 180 minutes, the next

increment goes back to 0. Massage timer does not activate the

massage feature. Once massage feature is activated and massage

timer has expired, the massage feature will stop. Activating the

massage timer and setting it to 0 will not turn off the massage.

E Custom Preset 1

Press and hold for more than 3 seconds to set current

position or function (massage or wave) as the programmed

position and/or function. The LCD display will show “1”

to indicate that the position and/or function has been set.

Press Custom Preset 1 to return the bed to the custom

programmed position and/or function. LCD display will show

“1” and bed animation of both head and foot sections.

F Raise Head/Lower Head

Press and hold to raise or lower the head

section to reach desired position. LCD will

display animation of the head section.

G Raise Foot/Lower Foot

Press and hold to raise or lower the foot section.

H Lounge

Press Lounge – the head and foot sections rise to a lounge

position. LCD will display bed animation of both head and

foot sections.

I Flat

Press Flat – the head and foot sections go to the ﬂat

position and both massage and position timers reset to

0. Pressing the Flat button will automatically turn off all

massage features.

J Zero Gravity

Press Zero Gravity – the head and foot sections raise to

7 degrees.

K Head Massage

Press and hold for more than 3 seconds to turn the head

massage feature on or off. Press the up arrow to increase

massage intensity; press the down arrow to decrease

massage intensity. LCD display will light up.

L Wave Massage

Press and hold for more than 3 seconds to turn the wave

massage feature on or off. Press the up arrow to increase

massage intensity; press the down arrow to decrease

massage intensity. LCD display will light up.

M Foot Massage

Press and hold for more than 3 seconds to turn the foot

massage feature on or off. Press the up arrow to increase

massage intensity; press the down arrow to decrease

massage intensity. LCD display will light up.

FlexFit Plus

™

Adjustable Base

Summary of content (5 pages)

PAGE 1
Remote Control Function FlexFit Plus™ Adjustable Base A Low Battery F Raise Head/Lower Head If low battery indicator is lit up, batteries need to be changed. Press and hold to raise or lower the head section to reach desired position. LCD will display animation of the head section. BR emote Troubleshooting A ressing and holding both Head Massage Down button P and Foot Massage Down button for 3 seconds will force the remote into a self-test mode.
PAGE 2
Remote Control Function FlexFit™ Adjustable Base A Raise Head/Lower Head Press and hold to raise or lower the head section to reach desired position. LCD will display animation of the head section. BC ustom Preset 1 ress and hold for more than 3 seconds to set current position P as the programmed position. The LCD display will show “1” to indicate that the position has been set. Press Custom Preset 1 to return the bed to the custom programmed position.
PAGE 3
Remote Programming 1 Power Down Box In case of a power outage, press and hold the Learn button on the receiver unit (power down box) to lower the bed to the flat position. This function is only for lowering the bed and will not move the bed to any other position. Once the bed is flat replace the (2) 9 volt batteries. 2 Program One Remote to an Adjustable Base Before beginning, make certain the bed is plugged into a working, grounded electrical outlet.
PAGE 4
Remote Programming 3 Program One Remote Control to Two Beds 4 Program Two Remote Controls to Two Beds Before beginning, make certain the beds are plugged into a working, grounded electrical outlet. Before beginning, make certain the beds are plugged into a working, grounded electrical outlet. Locate the power down box for bed 1 and press the Learn button on the power down box for 1 second then release.
PAGE 5
P rogram Two Remotes to a Split-King Adjustable Base 6 Separate Remote Controls Before beginning, make certain the beds are plugged into a working, grounded electrical outlet. Locate the power down box for bed 1 and press the Learn button on the power down box for 1 second then release. Press and hold both the Flat and Raise Head buttons on the first remote simultaneously for more than 5 seconds. The remote LCD display will blink a few times.