User's Manual

ManualsBrandsSkytech II ManualsElectronicsRemote Control System

3003TR User’s Manual

This remote control SYSTEM offers the user a

battery-operated remote control that operates most

millivolt gas valves used in some heater rated gas

logs, gas fireplaces and other gas heating

appliances.

The transmitter operates on (2) 1.5V AAA batteries.

It is recommended that ALKALINE batteries

always be used for longer battery life and maximum

operational performance.

Before using the transmitter， install the (2) AAA

transmitter batteries into the battery compartment.

(Use caution that batteries are installed in the proper

direction)

KEY SETINGS

　　MODE – Changes unit to ON / Thermo / OFF

mode position.

　　UP / DOWN – Changes temperature, time(r)

and other functions’ value.

　　TIMER / FAN / FLAME / LIGHT - Changes

each function to enable or disable.

　　OK - Sets temperature, time(r) and other

functions.

Summary of content (4 pages)

PAGE 1
3003TR User’s Manual This remote control SYSTEM offers the user a battery-operated remote control that operates most millivolt gas valves used in some heater rated gas logs, gas fireplaces and other gas heating appliances. The transmitter operates on (2) 1.5V AAA batteries. It is recommended that ALKALINE batteries always be used for longer battery life and maximum operational performance. Before using the transmitter， install the (2) AAA transmitter batteries into the battery compartment.
PAGE 2
LCD 1. ON / THERMO / OFF Indicates current mode. 2. ROOM °F OR °C Indicates current room temperature. 3. LIGHT Indicates light/valve in operation. 4. AUX Indicates auxiliary function enable/disable.. 5. FLAME Indicates burner/valve in operation. 6. SET °F OR °C Appears the desired temperature to indicate setting room temperature during the time of setting in the thermo operation. 7. Battery icon Indicates the battery is low or not. 8. FAN Indicates fan/valve in operation. 9.
PAGE 3
Mode To operate the system in the manual “MODE” does the following. ON OPERATION Press the “MODE” key into the ON mode. The appliance flame and fan will come on. During this time the screen will show ON. All the functions, FAN / FLAME / TIMER, will be active. THERMO OPERATION Press the “MODE” key into the THERMO mode. The transmitter will check the ROOM temperature and SET temperature to decide the situation THERMO ON or THERMO OFF.
PAGE 4
During the situation the functions, FAN / FLAME / TIMER, will be shut down exception of LIGHT function NOTE: (*) The highest SET temperature is 99° Fahrenheit (32° Celsius) and the lowest temperature is (45° Fahrenheit (6° Celsius) ¾ FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.