User's Manual

13XX-A User’s Manual

Date:2005-10-11

 Receiver name plate description:

 Receiver indicator :

1. “remote”: If receiver control by transmitter then this led will be ON.

2. “Outlet1”: When receiver output 1 ON,then this led will be ON.

3. “Outlet2”: When receiver output 2 ON,then this led will be ON.

4. “Power”:. When receiver get electricity power ,then this led will be ON.

 Receiver button :

1. “MODE”: switch receiver output mode.

2. “LEARN”: receiver learn mode use.

PAGE 1
3XX-A User’s Manual Date:2005-10-11 Receiver name plate description: 1. 2. 3. 4. Receiver indicator : “remote”: If receiver control by transmitter then this led will be ON. “Outlet1”: When receiver output 1 ON,then this led will be ON. “Outlet2”: When receiver output 2 ON,then this led will be ON. “Power”:. When receiver get electricity power ,then this led will be ON. Receiver button : 1. “MODE”: switch receiver output mode. 2. “LEARN”: receiver learn mode use.
PAGE 2
1. 2. 3. 4. Operation: Before use this receiver first need press “LEARN” button to finish learning mode then can operate. Learn step: a. Press “Learn” button, receiver will beep around two second. b. Press transmitter any button ,If receiver have five short beep that mean finish learn mode. Press “MODE” button can switch receiver output mode as below: OFF(outlet1&2 all off) Outlet1 output ON- Outlet2 output ONOutlet1&outlet2 output ON OFF…...