User's Manual

Pedometer
Movement
Sleep monitoring
Count the steps,
mileage, and
calories for 24
hours of a day.
Heart rate
Heart rate, blood
oxygen, blood
pressure in
real time.
Long press the
touch area to turn
on sleep monitoring
function.
If this function is on,
long press the touch
area to turn off. Ending
sleep time counting.
Initial state Outdoor running Indoor running Walking Pause
Binding Bracelet
How to wear it
The best Bracelet should be worn behind
styloid process of ulna.
Sensor
Ulnar Styloid
left hand
Smart Bracelet Instruction
Please read this user manual carefully before use
版本02
This manual is used as a general manual. Different models of products have different functions.
Please refer to the actual product for product functions.
In order to ensure pairing of devices successfully, the mobile phone
should be kept close with the device.
1. Scan the QR code below or search "Skyring Health" through mobile
app market , follow the prompts to download and install.
Mobile system requirements: Android 4.3 / IOS 9.0 and above.
2. Open the downloaded app, create and log in the account, and
select adding devices on the "device" page to complete the
addition and pairing of devices.
1.Operation method:
Make sure the power of your bracelet is normal for the first time. If
the device can't be started normally with low power, please charge
the device. The bracelet will start automatically.
2.Charging mode:
(1) Remove the strap from the bracelet body；
(2) Put the end of the main body of the bracelet with the charging
metal into the USB port to make the charging metal contact with the
metal in the USB port, so as to charge correctly (please pay
attention to the direction).
3.Device connection：
The first time you use the bracelet, you need to connect the app for
calibration. After the connection is successful, the bracelet will
automatically synchronize the time, otherwise the time is not accurate
and the data cannot be transmitted.
USB charging head
Functional specification
1 2 3
Power on
Body temperature measurement
Power off Distance detection
When the screen
is off，long press
the touch area.
long press the
touch area at the
Turn Off interface.
The default setting is
off, long press the
touch area to turn on.
If this function is on,
long press the touch
area to turn off.
Initial state After measuring
body temperature.
When body temperature ≥37.3℃,
the temperature data turns red.
FAQ
1、 Why can't I connect my bracelet to my mobile phone?
If you can't connect to the phone for a long time, you can try the
following methods and then reconnect:
A. Restart the Bluetooth;
B. Restart the cellphone;
C. Check if the bracelet is turned on;
2、Why doesn't bracelet fail to charge?
Please check if the bracelet is connected correctly and plug in the
USB charger.
Precautions
1. Please don’t drop or hit with hard objects, otherwise it may cause
grinding of the machine surface, data loss or other hardware damage；
2. Please don’t try to disassemble or modify this machine, it will cause
quality problems or hinder product warranty;
3. Please don’t clean the bracelet with chemicals or detergents, as this
will damage the machine surface and corrode the paint;
4. It is forbidden to use overloaded power supply , bend or squeeze the
power cord with heavy objects to avoid heat and fire;
5. It shouldn’t be worn while bathing and showering；
6. The battery of the bracelet is not removable. Do not expose the
bracelet to a place with high moisture and extremely high or low
temperature for a long time；
7. Please connect the bracelet when synchronizing the date.
54 6
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
7
Lithium polymer
401425
100mAh
Main engine and manual
TPU strap
Battery type
Battery model
Battery capacity
Packing list
Wristband material
Equipment type
Display
Product weight
Bracelet width
Waterproof grade
Smart Bracelet
1.14 inch TFT
20G
(excluding strap)
18mm
Not waterproof
Measured value of temperature,(Oxygen saturation and blood pressure) are not reference for
clinic, diagnostics or treatment proposals.