User Manual Front Panel Button Operation SN-6805-AC 效果图 1. 2. Power ON/OFF and volume control. Press and hold for 3 seconds to turn off the unit and press again to turn on the unit. button. Press the button on the front panel to advance to the next chapter or move to the previous chapter for the DVD. Press the button on the front panel to seek the next available channel by increasing the tuning frequency for the HDRadio and press the button again to stop searching.
10. 11. 12. 13. button to select and input the destination. TUNER SELECT button. Eject disc. CDROM: Insert the DVD/CD/MP3 discs directly. SD card slot. MAIN MENU Operation Firstly: Button Function Description There are two methods to access the MAIN menu: Press the button on the remote control. Press the button on the front panel. Note that the operational modes display contains twelve features for touch-screen selection, these features consist of: 1. 2. 3. 4.
5. 6. 7. 8. 9. 10. 11. 12. BLUETOOTH: Touch to access the BLUETOOTH mode. CAMERA: Touch to access the CAMERA mode. REAR:CD/DVD: Touch to access the REAR:CD/DVD mode. SAT: Touch to access the SAT mode. NAVI: Touch to access the NAVI mode. AV 1: Touch to access the AV 1 mode. AV 2: Touch to access the AV 2 mode. SETUP: Touch to access the SETUP mode. Here we give a table of the description for summary. Icon/Button Touch the button icon to... access the Radio mode. access the CD/DVD mode.
HDRadio (FM/AM) Operation Firstly: Button Function Description 1. 2. 3. 4. 5. 6. 7. 8. Touch to return to MAIN menu. RSSI indicator. HDRadio logo, if current audio is digital audio, the logo will display. When go to PTY search mode, it will display this information. Stereo button. HDRadio blend mode indicator. Current time. List display area. In normal mode, the list will display preset list.
will display PTY category. In HD mode, the list will display sub-channels. 9. Touch this area to go to next list page. 10. Mute button. Touch to mute on and mute off alternately. 11. Touch to go to previous list page. 12. Touch to hide or display additional functions. 13. Touch to display some information about the current channel. 14. Touch to go to PTY search mode. 15. HDRadio blend mode selection. Touch to select between Auto, Digital and Analog mode. 16. Auto store. 17.
saved in preset list. Recalling a station 1. Select a band (if needed). 2. Touch an on-screen preset list button to select the corresponding stored station. NOTE: Press the button on the front panel to acquire a channel list at the bottom of the screen, just do as the second step, you can get the same result. HD MODE When HD signal is received, touching the button will display HD channel list.
DISP MODE Touch the button to display some information about the current channel. See picture below: NUMERIC KEYPAD This function displays the numeric keypad on the screen, allowing you to tune by entering a preset number. Touch to display a numeric keypad to let user input the frequency directly.
Touch the to key corressponding with the preset you desired, when you input the wrong number, touch the Touch the key to delet the wrong number. key to turn in to the entered preset. DVD Player Operation Firstly: Basic knowledge about disc NOTE:When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays caution information with a blue background.
To switch to DVD mode when a disc is already inserted, press the front panel or press the button on the button on the remote control till DVD appears at the top of the screen. Secondly: Button Function Description 1. Touch to access MAIN menu. 2. Touch to display subtitles. 3. Touch to choose a language on condition that the disc is recorded in multiple languages. 4. Touch to repeat playback. 5. Touch to repeat from A to B.
to stop DVD play and touch the play/pause button on the screen or button on the remote control to resume the disc play. Pausing playback Touch the play/pause button on the screen to suspend or resume the disc play. Repeat playback Touch the repeat button or press on the screen or press button on the remote control button on on the front panel to repeat title, repeat chapter,repeat off for the DVD mode.
Touch the arbitrary aera of the screen, and then touch the button or press the button on the remote control to fast forward . Keep touching or pressing and releasing the button to increase the rate from"2X" to "4X", "8X" and "16X". Touch the arbitrary aera of the screen, and then touch the button or press the button on the remote control to fast reverse . Keep touching or pressing and releasing the button to increase the rate from"2X" to "4X", "8X" and "16X".
Enter a title, chapter, or time number as your desired into the field by using the numeric keypad on the screen or on the remote control. Touch the button on the numeric keypad or press the button on the remote control to go to the specified location on the disc. NOTE: During the DVD playback, you can use the numeric keypad on the remote control to access a track directly.
MULTI-LANGUAGE DISCS(DVD ONLY) Changing audio language If you are watching a disc recorded in multiple languages, touch the arbitrary aera of the screen, and then touch the button to choose a language. You can also press the button on the remote control to achieve it. Changing subtitle language If you are watching a disc recorded in multiple languages with subtitles, touch the arbitrary aera of the screen, and then touch the button to choose a language in which the subtitles should appear.
CD/MP3/WMA/JPEG Operation CD/MP3/WMA DISCS Firstly: Button Function Description for CD/MP3/WMA Instruction for insert/eject, play/pause, stoping playback, track selection, repeat and random play are the same for the DVD, CD, MP3 operation. Please see the DVD player operation section for information about these topics. 1. Touch to go back to MAIN menu. With different media source, such as CD, MP3, WMA, this area will display the same words as disc. 2. Current time. 3. Play list with folder. 4.
17. The scroll bar for display the schedule of a track or a song. 18. Track for a CD disc, song name and artist name for MP3/WMA disc. 19. Current track or song and total number of tracks or songs on disc. Secondly: Some Implenting Modes of Operation for CD/MP3/WMA PLAY CD/MP3/WMA FILES After inserting a CD disc, files will play in the sequence of the directory. In playback mode, you can touch a track on the screen directly or press the numeric button on the remote control to play it.
5. Touch to display the previous picture. 6. Touch to stop displaying the current picture and return to the picture list. 7. Touch to show the picture information. 8. Touch to show the total pictures of the current folder.
SD card reader Operation NOTE: the Insert the SD card in the slot and press the button on the front panel or press button on the remote control to switch to the SD card mode. Button Function Description for SD Card The touch keys for SD card playback are described below. The interface is similar to the CD/MP3/WMA mode. 1. Touch to go back to MAIN menu. With different media source, such as SD, USB, this area will display the same words as media. 2. Current time. 3. Play list with folder. 4.
14. Touch to repeat playback. 15. Touch to display a numeric keypad on the screen, and then you can use the numeric keypad to access a track directly. 16. Elapsed playing time. 17. The scroll bar for display the schedule of a track. 18. Track name and artist name. 19. SD card indicator, display the current track and total number of tracks on SD card.
Ipod Operation NOTE: ACCESSING IPOD MODE To switch to access ipod mode, press the button on the front panel or button on the remote control until the ipod symbol appears at the top of the screen. Firstly: Button Function Description for Ipod 1. Touch to access MAIN menu. 2. Display repeat or random playing. 3. Current time. 4. Ipod play list with category. 5. Touch to show the next page of play list. 6. Touch to mute voice or not. 7. Touch to show the previous page of play list. 8.
19. Song title. 20. Artist. 21. Song name. 22. Song number index. Secondly: Some Implenting Modes of Operation IPOD VIDEO PLAYBACK It is necessary to activate the video output of the ipod. If there are some valid videos in ipod and the ipod has been connected to the unit with USB and video line, you can press button to go into video play mode, and the video list will appear in the right list area. Touch one video source in the list and the video will be played full screen.
NOTE: This function is only valid in one browse. REPEAT OR RANDOM PLAY MODE Touching button one time can play the current song and touching twice can repeat playing the songs in current directory. Touch button can random play the songs in current directory. SCAN PLAY MODE Touch seconds.
Bluetooth Operation Firstly: Before using the bluetooth interface ACTIVATE AND PAIR Before using the bluetooth interface, it's necessary to perform the following steps. For more operating details, refer to each section below. Select the "Bluetooth" option in the bluetooth interface. Pair your mobile phone to the unit (refer to the "Pair" operation). It is necessary to pair your phone to the unit first. Without pairing, bluetooth is not available.
4. Current time. 5. Touch to access the "Phone" interface. 6. Touch to access the "Contacts" interface. 7. Touch to access the "Call Log" interface. 8. Touch to access the "Music" interface. 9. Touch to access the "Devices" operation. 10. Touch to access the "Settings" interface. 11. Touch to switch the audio output between the unit and the mobile phone. 12. Touch to end a call. 13. Touch to answer an incoming call or dial a call. 14. Delete input number. 15. Touch the number to initiate the phone call.
Touch button to return to the previous. CALL LOG Touch the button to access the "Call Log" interface. See picture below: It contains items as "Dialed Numbers", "Receiced Calls", "Missed Calls". MUSIC Touch the below: button to access the "music" interface.
DEVICES Access the bluetooth devices and choose a pair mode, then "Searching.......", select a device and input the pin code for pairing. The unit can pair with five mobile phones in all, but just one can be actived at a time. When maximum pairing has been completed, that is, five mobile phones have been connected with the unit, and you want pair a new one, then the system will delete the first phone and the new paired phone will be added in.
support this option. If your phone supports voice dial, access this mode on your phone instead of using the contracts. ANSWERING AN INCOMING CALL You can answer an incoming call even if the playing source is other than the telephone is selected. You can answer an incoming call manually. when a call comes in, the following interface will be displayed on the screen: END A CALL Touch the icon to end a call.
XM Operation Firstly: Button Function Description for XM This function is available when a XM Satellite Radio Receiver is connected through the dedicated connection. 1. Touch to access MAIN menu. 2. Signal indicator. 3. Category quick view. 4. Touch to show the next category. 5. Current time. 6. Play list with folder. 7. Touch to show the next page of current list. 8. Touch to mute voice or not. 9. Touch to show the previous page of current list. 10. Touch to store current channel.
Access the MAIN menu first and touch the button on the screen to access the XM mode. VIEW ALL AVAILABLE CHANNELS IN CHANNEL LIST root, touching In list area with list button will display channel list, and touching one of the channels will tune to it. VIEW CATEGORY LIST In list area with root, touching list button will display category list, and pressing one category will display the channels in this category.
Input a valid channel number and touch button.
SIRIUS Operation Firstly: Button Function Description for SIRIUS This function is available when a Sirius Satellite Radio Receiver is connected through the dedicated connection. This unit requires the following receiver: ● SIRIUS Satellite Radio Receiver: SC-C1 Note: SIRIUS Satellite Radio is a subscription service. Please contact Sirius Radio to begin or alter your subscription: Internet: www.sirius.com Telephone: 888-539-SIRIUS (747487) 1. 2. 3. 4. 5. 6. 7. 8. 9. Touch to access MAIN menu.
10. Touch to store current channel. 11. Touch to display the numeric keypad on the screen to access a channel directly. 12. SID or the playing channel information. The first line displays the playing channel name, the second line shows artist of the channel, the third line is the title of the channel. 13. Touch to show previous category. Secondly: Some Implenting Modes of Operation ACCESSING THE SIRIUS MODE Access the MAIN menu first and touch the button on the screen to access the SIRIUS mode.
Touch button to display a numeric keypad.
1. Lock list. Touch to lock/unlock the channel. 2. Touch button to go into "LOCK" mode, you need to input a correct password. 3. Next page. 4. Previous page. Touch 1.Touch this lock button to set the password or remove the password. See picture below: to remove the password (initial password is 8888).
button, and a numeric keypad will display, if you input a correct password, the password will be removed, and then the lock button will become unlock button . Note: If you input a wrong password, the numeric keypad will display again and remind you that the password is error and you should input the correct password again. DIRECTLY ACCESS CHANNE Touching button will display a numeric keypad as below: Input a valid channel number and touch button.
Setup Operation Firstly: Button Function Description Touch the button on MAIN menu screen. See picture below: 1. Touch to return to MAIN menu. 2. Setup option, touch to select . 3. Setup item, touch to show it’s option. 4. Setup category list, touch to show relevant setup items. Secondly: Some Implenting Modes of Operation SELECTING A FERTURE FOR ADJUSTMENT Touch the option directly on the screen to select the feature to be adjusted.
General: Settings Options Function Clock Numeric keypad Adjust the hours and miniutes AM/PM AM/PM Select AM or PM when the clock mode display 12Hr, or else, they will turn to be gray. Clock Mode 12Hr Clock displays 12 hour time using AM and PM. 24Hr Clock display 24 hour time up to 23:59. On Beep is active. Off Beep is deactivated. Normal The output of camera image is in normal mode. Mirror The output of camera image is in reverse mode. On Select to activate the bluetooth function.
ASP MODE ASP: Settings Options Function Bass Freq 60Hz Depending on the audio source, select the bass center frequency to achieve the best bass effect. 80Hz 100Hz 200Hz Treble Freq 10kHz 12.5kHz 15kHz Depending on the audio source, select the treble center frequency to achieve the best treble effect. 17.5kHz Sub Filter 80Hz Selecting a crossover frequency sets a cut-off frequency of the subwoofer's LPF (low-pass filter) and the "SMALL" Speakers' HPF (high-pass filter).
Spanish which you would like audio (if available) to be displayed. Table of "Language" VOLUME MODE The options of the navi volume are 0 to 5, and you can select one of them to confirm the navi volume. MISC MODE Misc: Settings Options Function TS Calibrate No Touch "Yes" to enter the touch screen calibrate mode. Yes Set Password ---- Touch "---" or "Lock"to display a numeric keypad, enter a 4-digit password to deactivate or activate the "Parental control" feature.
AV IN Operation ACCESSING AV IN MODE Touch the "AV 1" button on the screen , or press the button on the front panel or the button on the remote control until "AV IN" Appears at the top of the screen. Note : for your safety, the unit has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied.
Camera Operation NOTE: This function is available when a VTR, etc. is connected to the visual terminal. For your safety, the unit has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the car is stopped and the parking brake is applied. See picture below: ACCESSING CAMERA MODE Touch in R state.
Navigation operation ACCESSING NAVIGATION Access the MAIN menu and select the icon on the screen to enter the navigation operation interface. Press the button on the front panel or the button on the remote control to switch to navigation. NAVIGATION OPERATION Please read the navigation software user manual. Listening to an audio program while using/viewing the navigation. 1. You can listen to an other playing mode while using the navigation mode. Select a playing mode. 2.
