User's Manual

ManualsBrandsSKYPINE ELECTRONICS ManualsElectronicsCAR DVD ENTERTAINMENT CENTER (BLUETOOTH PORTION ONLY)

Table Of Contents

System SCREEN Setup Menu

Screen Setup Menu

Press the SCREEN Setup button to access the SCREEN SETUP mode

Select desired parameter you wish to change

Page will return back to previous screen after 10 seconds of inactivity or by pressing the RETURN button

Adjusting a Feature

Settings Default Options

Function

Brightness

0 to +20

Press the < / > buttons on the remote or rotate the

ENTER button clockwise / count-clockwise to adjust

the BRIGHTNESS to the desired setting

Screen Tilt 4 1 - 6 Select 1 to 6 to adjust the default tilt angle of the screen

Screen

Saver

Off

Select On to activate the screen saver, Off to deactivate

Touch "Yes" to enter the Touch Screen calibration mode

NoNo

Touch

Screen

Calibration

Version

Yes

Setting TFT Brightness

This will set the default setting for the TFT display brightness, this setting can also be set by pressing the

INFO button on the front TFT panel.

Step 2) Touch SCREEN

setup button

Step 3) Touch [-] to DIM

TFT

Software version of unit

To conserve the LCD backlight lifespan or to stop annoying glare while night driving, press STANDBY, the

TFT screen only will black out, however all other operations are still possible, press any button except

VOLUME or touch screen again to return normal viewing.

Step 1) Touch top left

corner of screen

Step 4) Touch [+] to

brighten TFT

0 to + 20 is possible

Default = 10

Summary of content (7 pages)

PAGE 1
System SCREEN Setup Menu Setting TFT Brightness Screen Setup Menu This will set the default setting for the TFT display brightness, this setting can also be set by pressing the INFO button on the front TFT panel.
PAGE 2
Step 5) Touch HOME to exit Step 3) Touch NO in TS Calibration row. Step 4) Then press YES. Step 5) Touch and hold the pointer A. Step 6) Next, touch and hold the pointer B. Setting TFT Angle Set for best viewing angle in your vehicle Step 1) Touch top left corner of screen Step 2) Touch SCREEN setup button 2 5 Step 3) Touch a number displayed in Step 4) Touch desired angle for best viewing angle SCREEN TILT row 6 Step 7) Touch and hold the pointer C. Step 8) Touch and hold the pointerD.
PAGE 3
DVD Menu DVD setup menu Press to select desired disc menu language DVD Setup Menu - Language Notes:A DVD disc must be inserted to access these functions and features. Language Setup Menu ENGLISH = DEFAULT With the monitor open in DVD mode, press the AREA A (top left screen) to display the MAIN menu bar. Press DVD Setup to access the DVD setup menu. DVD Setup Menu - Video Note:A DVD disc must be inserted to access these functions and features.
PAGE 4
Angle Mark Press RATING icon to select from the following menus: Press to select desired Angle Mark. Enable Parental Lock Password Press ---- to enter a your desired password. Video Mode Press to select desired Video mode. Setting Parental Lock Password FILL 1. Enter a 4-digit code ORIGINAL 2. Write the code down H FIT 3. Save in a safe place W FIT Rating Setting FIT TO SCRN Press to select desired Rating Setting. PAN SCAN 1. Kid Safe OFF 2. G 3. PG 4. PG-13 DVD Setup Menu- Ratings 5.
PAGE 5
46 47 Check connections at speakers Insulate all bare speaker wires from each other and chassis ground Check for pinched wire Check for pinched wire Use fuse with correct rating Speaker wires not connected One or more speaker wires touching each other or touching chassis ground Yellow or red wire touching chassis ground Speaker wires touching chassis ground Incorrect fuse rating The attempted pairing process has failed Pairing Fail appears in display Disconnect current mobile device first, then connect
PAGE 6
48 Remote control does not function Remote Caller ID does not appear during incoming call Call is answered automatically Call is connected (but no audio can be heard through the speakers) Echo or noise is heard during a phone call Ring tone cannot be heard through the speakers Mobile device will not connect to the head unit automatically Close all windows and turn off any fans or A/C Possible road noise or interior interference Battery installed incorrectly Battery depleted Remove battery and in
PAGE 7
Specifications Caution General Package Operation voltage range: 10.5V~ 16.0V. Max operation current:10A. Qualified DVD AV System must be packed with general wet-proof inner package. Current of standby: Carton packing must be general wet-provable: ACC OFF、 POWER OFF≤18 mA ACC ON、POWER OFF≤50 mA Packing place should be clean, dry, and harmful medium-less.