User's Manual

ManualsBrandsSKYPINE ELECTRONICS ManualsElectronicsCar Navigation Entertainment System

English

NX500/NZ50042

Press [Setup] button on the Main Menu screen.

The Setup menu screen will be displayed.

General Setup Menu

Clock: Touch the button to set the clock.

Select Clock Mode 12 Hr.

AM/PM: Touch the button to change

AM or PM, when 12Hr mode is

selected.

Beep: The function of it is to choose the

Beep voice on or off.

Camera Image: The Function of it is to choose

the mode of camera image normal or

mirror.

Radio Field: The function of it is to choose the

radio mode in the country you are. It’s

contain USA, Europe, S. America,

Other.

Tel Mute: The function of it is to set the

Bluetooth ready on or off .

Tel SP: The function of it is to set the speaker

of the Bluetooth ready front left or

front right.

Auxin Input SW: The function of it is to choose

the auxin input switch, including Low,

Mid, High.

Version: Display the software version

information.

Video Setup Menu

This menu includes: TV Shape; Aux IN;

Brightness.

TV Shape: The function of it is to choose the

screen area shape - 4:3 or 16:9.

Aux IN: The function of it is to choose Aux In

format. It contains AUTO, PAL, NTSC.

Brightness: Set brightness value from 0 to 20.

ASP Setup Menu

This menu includes: Bass Freq; Treble Freq; Sub

Filter; Bass Q-Factor.

Bass Freq: Choose the desired bass frequency.

60Hz, 80Hz, 100Hz, 200Hz

Treble Freq: Choose the desired treble

frequency 10KHz/12.5KHz/1 5KHz/

17.5KHz.

Sub Filter: Choose the desired Sub Filter

frequency: 80Hz/120Hz/160Hz.

Bass Q-Factor: Choose the Bass

Q-Factor:1.0/1.25/1.5/2.0.

Navigation Setup Menu

This menu includes: GPS Time, Time Zone, DST

Setup Operations

NX_NZ500 0608.ﬁndd 4 6/16/2009 8:06:22 AM

Summary of content (14 pages)

PAGE 1
Setup Operations English Press [Setup] button on the Main Menu screen. The Setup menu screen will be displayed. General Setup Menu Video Setup Menu This menu includes: TV Shape; Aux IN; Brightness. Clock: TV Shape: The function of it is to choose the screen area shape - 4: or 16:9. Aux IN: The function of it is to choose Aux In format. It contains AUTO, PAL, NTSC. Brightness: Set brightness value from 0 to 0. Touch the button to set the clock. Select Clock Mode 1 Hr.
PAGE 2
GPS Time: Use this function of it is to synchronize the GPS time or not. It contains two choices: Ignore and Sync. Time Zone: Choose the desired Time Zone: NTF/Atlabtic/Eastern/Central/ Mountain/Pacific/Alaska. DST: Use this function to set Daylight Saving Time on or off. Misc Set Up This menu include: TS Calibrate; Set Password; Parental control. TS Calibrate: The function of it is to select the TS Calibrate YES or NO. Set password: The function of it is to set the password of the child lock.
PAGE 3
English 8. TROUBLESHOOTING GENERAL Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the reset button with a thin rod. Note: When the Reset button is pressed, turn off the ACC power.
PAGE 4
Problem Cause Measure USB device cannot be inserted. The USB device has been inserted with wrong direction. Reversing the connection direction of the USB device, try it again. The USB connector is broken. Replace with a new USB device. The USB device is damaged. Connectors are loose. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. No sound heard with the display “NO FILE” shown.
PAGE 5
English 10. SPECIFICATIONS FM Tuner Frequency Range: 87.9 MHz to 107.
PAGE 6
English INSTALLATION /WIRE CONNECTION GUIDE CONTENTS 1. BEFORE STARTING .......................................................... 47 . PACKAGE CONTENTS ...................................................... 47 . GENERAL CAUTIONS ....................................................... 47 4. CAUTIONS ON INSTALLATION ......................................... 48 5. INSTALLING THE MAIN UNIT ............................................ 49 6. CAUTIONS ON WIRING .................................................
PAGE 7
4. Cautions on Installation English 1. Prepare all articles necessary for installing the source unit before starting. . This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed. Before installing, check that the unit will not hamper operation of the gearshift lever or obstruct your view before selecting the installation location. (Figure ) NZ409 4.
PAGE 8
This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7. . Wire as shown in Section 7. . Reassemble and secure the unit in the dashboard and set the face panel and center panel. English 5.
PAGE 9
Installing the Main Unit in TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked vehicle.) are attached to the Main Unit 8- 8-Hexagonal Hexagonal screws screw (M5x8) (M5 Center Panel (* 2 ) 8) Mounting bracket Mounting bracket (1 pair for the (1 pair for left the left and right sides) *3 and right sides) Figure 77 Figure * Some panel openings are too small for the unit depending on the vehicle type and model.
PAGE 10
English 6. Cautions on Wiring 1. Be sure to turn the power off before wiring. . Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires. . If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). 4. To replace the fuse, remove the old fuse on the back of the unit and insert the new one.
PAGE 11
7. Wire Connections English Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA cables and the Connector cables are separately-sold items.
PAGE 12
English NZ409 GPS Radio Antenna Jack SIRIUS CONNECT VEHICLE TUNER Connector Cable Sirius iPod/iPhone Refer to page 54 iPod Black Yellow White Red Red Visual IN Audio/L Audio/R Red Purple White Red Black White Red Gray White Yellow Black Yellow White Blue Black NX500/NZ500 NX_NZ500 0608.
PAGE 13
English Yellow Black Purple Purple/Black Red Gray Gray/Black White White/Black Green Green/Black Blue/White Orange/White Blue Brown Grass-green Violet/White : +12V main power Ground Rear right + Rear right +12V accessory Front right + Front right Front left + Front left Rear left + Rear left Amplifier turn-on cord Illumination Auto antenna Phone interrupt (*1) Parking brake cord Reverse Note *1: Connecting the PHONE INTERRUPT terminal The phone interrupt will mute the audio if the lead receives a negati
PAGE 14
Connect the cord to parking brake lamp ground in the meter panel. Note: • Connecting the parking brake cord to lamp ground allows you to watch iPod/iPhone video/DVD video/AV input when the parking brake is engaged. • When the parking brake cord is not connected, the monitor will not show any video sources. • If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.