This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Contents Thank you for your choosing our product. We hope you will find the instructions in this user manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new unit for maximum enjoyment. After you have finished reading the instructions, please keep this manual in a safe place for future reference.
DVD Player Operation 20-25 Insert/Eject Disc Reset the Loading Mechanism Accessing DVD Mode Using the Touch-Screen Controls Controlling Playback Accessing the DVD Menu Moving Through Chapters Fast Forward/Fast Reverse Selecting 2-Channel or 6-Channel Audio Playback GOTO Search Direct Chapter / Track Selection Viewing an Alternate Picture Angle (DVD Only) Zooming Multi-Language Discs (DVD Only) Playback Information General Disc Information CD/MP3/WMA/JPEG Operation 20 20 20 20 21 21 21 21 22 22 23 23 23
Precautions To avoid the risk of injury or accident, read the following precautions before installing and operating the unit. On safety Comply with your local traffic rules and regulations. � While driving � You must not watch or operate the monitor. It may lead to distraction and cause an accident. Park your car in a safe place to watch the monitor and operate the unit. � While operating � Do not insert your hands, fingers or foreign object into the unit while the monitor is functioning.
� DivX format � AVI format � MPG format The following types of discs/files are not compatible: � WMA files that are protected by DRM (Digital Rights Management) � WMA lossless format � Discs recorded with Track At Once or packet writing � MP3 PRO format � MP3 playlists � WAV format Some recordable DVDs and CDs may be incompatible with this unit, depending on media type and recording method.
Preparation Please read all of the instructions below before beginning your installation. We recommend that you have your unit installed by an experienced car navigation system installer . Features � � � � � � � � � � Double DIN size, all-in-one highly integrated entertainment system Built-in DVD Player, automotive specification slot loading mechanism Built-in FM/AM Tuner, High resolution 6.2”(16:9) TFT color monitor, contrast and brightness adjustment Built-in 40W X 4 output amplifier, 4.
Controls and Indicators Button Operation 1、EJECT Press for disc insertion/ejection. 2、POWER OFF/VOL/Smart dial Rotary encoder volume control. Press to power on when the machine is in power off estate. Press and hold to power off while unit is on.
The key areas of touch screen The touch key areas are outlined below, for DVD, VCD playback mode and so forth. Area A Area F Area B Area C Area D Area E A — Return to MAIN MENU B — Display playing information C — Select previous chapter D — Select next chapter E — Display the on-screen controls, and different mode displays different menu. F —On DVD/VCD mode, display the GOTO search menu on the screen directly.
Remote Control Front Zone Remote Control 3 ○ 4 ○ 2 ○ 1 ○ 6 ○ 7 ○ 8 ○ 10 ○ 11 ○ 13 ○ 14 ○ 15 ○ 19 ○ 20 ○ 23 ○ 24 ○ 27 ○ 28 ○ 5 ○ 9 ○ 12 ○ 16 ○ 17 ○ 18 ○ 21 ○ 22 ○ 25 ○ 26 ○ Name Ref # Power Open Mute SRC Numeric button VOL up VOL down Information GOTO search 1 2 3 4 Stop/Band 10 Select ESC Menu Picture Repeat A�B OK Direction buttons 11 12 13 14 15 16 Turn the power on/off disc insertion/ejection.
Title 18 Also can activate and disable SCAN mode while playing CD Root 19 Enter the main menu of the disc Turn on PBC while playing VCD Repeat 20 Repeat playback for current chapter Next 21 Previous 22 Fast Reverse 23 Fast reverse the disc content Fast Forward 24 Fast forward the disc content Audio 25 Change the audio language for disc playback Zoom 26 Zooming in/out on an image Angle 27 Play in different angle for a scene(if it is applicable) SUB Title 28 Language selection fo
TFT Monitor Operation Rear Camera Mode When the vehicle is placed in "Reverse", and an optional rear camera is connected to the unit, the TFT monitor will automatically switch to the camera input source. Image Setting Video Output Format The table below shows the video output format for each source.
Operation Instructions Power On / Off Press the POWER /VOL button to turn the unit on. You can also turn on the unit by pressing the button ( ) on the remote. Press and hold the POWER/VOL button on the front panel or press the POWER button ( ) on the remote to power off the unit.
Audio Adjustments Audio Function Adjustable Range User Flat Jazz Pop Classical EQ BASS TREBLE FADE BAL SW Loudness -7 to +7 -7 to +7 -7 to +7 -7 to +7 -7 to +7 Off, or ON NOTE NOTE: The Bass and Treble levels are only adjustable when EQ is on “User” mode. The Loudness function compensates for deficiencies in sound ranges at low levels.
System Setup Menu MAIN Menu There are three methods to access the MAIN menu. ·Press the MENU button on the front panel . ·Press the MENU button on the remote control. ·Touch the A area on the touchscreen. Note: Remote, Smart dial, touch screen operations and buttons on front panel are all useable to select menu and adjust settings. The following instructions will show the different ways to access menus and adjustments.
Adjusting a Featur Setting Options Function TS Calibrate No / Yes Set password ---- Rating 1.2.3.4.5.6.7.8 Screen Saver On / Off Touch to activate/deactivate the Screen Saver. Bluetooth On / Off Activation/deactivation of the integrated Bluetooth function. Antenna On / Off Select “On” to turn on tunning antenna. Load factory Yes / No Select “Yes” to restore the factory settings of the multimedia system (except for password and parental control).
Return to normal playback The system will automatically return the previous playback mode that it was in before accessing the setup menu 20 seconds after the last operation. Setting Radio Clock Clock Mode Version Options Function USA S-America1 S-America2 Europe Korea China Arabia Select the appropriate setting based on the country in which you reside. (HH:MM) See “Adjusting the clock” to learn how to set the clock. 12Hr Clock displays 12 hour time using AM and PM.
Setting Options Function TV Shape 16:9 4:3 Select the appropriate setting based on the country in which you reside. The video output is switched automatically based on the current disc. The video output is in the standard NTSC format The video output is in the standard PAL format The video output is in the standard SECAM format Auto Video format NTSC PAL SECAM uration Menu ASP(Audio Signal Processing) Config Configuration The ASP Configuration menu allows you to make fine audio adjustment.
17KHz 80Hz Sub Filter 120Hz 160Hz Bass Q-Factor 1.0 1.25 1.5 2.0 Selecting a crossover frequency sets a cut-off frequency of the subwoofer’s LPF(low-pass filter) and the “SMALL” speakers’ HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to “Off” and any other speaker is set to “Large”. When the Bass Center Frequency is selected, adjusting the Bass Q-Factor alters the sharpness of the Bass output.
Tuner(FM/AM) Operation Tuner TFT Display 1. : Touch to change among the following bands: FM-1, FM-2, FM-3 and AM. 2. : Touch to seek down. 3. : Touch to seek up. 4. : Touch to tune down once a step. 5. : Touch to tune up once a step. 6. : Touch to activate/deactivate Scan Mode 7. : Auto store 8. :Program scan 9. :Touch to display the numeric keypad on the screen Switch to Radio Tuner source Press the remote control to switch to the Tuner source.
Manual Tuning Press the button on the remote control or touch the frequency one step at a time. button to increase the tuning Press the button on the remote control or touch the frequency one step at a time. button to decrease the tuning Using Preset Stations 12 numbered preset buttons store and recall stations for each band. Front 6 stored stations (P1P6) for the current band appear on the screen, touch the channel directly for use.
DVD Player Operation NOTE NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays caution information with a blue background. Rear video screens, if applicable, will operate normally. Insert/Eject Disc ting a Disc Inser Inserting When inserting a DVD disc, DVD mode is entered and disc play begins.
8. 9. Touch to return to DVD main menu Touch to display Sub-title Controlling Playback Stopping Playback Touch the stop button on the screen or press the ( OK) button on the on the screen or the (OK) stop DVD play; touch the play/pause button remote control to resume disk play. Pausing Playback Touch the play/pause button Repeat Playback ) button on the remote control to on the screen to suspend or resume disc play.
Selecting 2-Channel and 5-Channel Audio Playback 2-Channel Audio (Down Mix) Support for CD, SD Card and DVD Linear pulse code modulation (LPCM) and pulse code modulation (PCM) support is available for CD, SD Card and DVD discs when 2-channel audio is selected. 5- Channel Audio Support for CD, SD Card and DVD Surround I is available for decoding analog or digital 2- channel down mixed sources. Surround II is available for decoding digital bit-stream sources.
4. Enter a time/Track number into the field using the numeric keypad on the remote control or on the screen. 5. Press the OK button on the remote control or on the touch screen to go to the specified location on the disc. 6. Press the ( -/--)button on the remote control or touch the F Area on the screen again to exit. Direct Chapter / Track Selection During DVD, VCD and CD playback, you can use the numeric keypad on the remote control to access a track directly.
1 indicates Current playing source. ○ 2 ○ 3 Indicates the playback time of the current title. ○ 4 Indicates the status of subtitle ○ 5 Indicates the audio channel ○ 6 Indicates velocity ○ 7 Indicates angle ○ 8 Indicates chapters on the DVD is currently playing. ○ 9 Indicates the third of 3 titles on the DVD is currently playing. ○ VCD Playback Information The following information is displayed at the middle of the screen during VCD playback: 1 indicates Current playing source.
General Disc Information Symbol 12cm Disc Properties Max Play Time Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes Single side single layer (VCD) (MPEG 1 Method) 74 minutes Single side single layer 74 minutes Disc Symbols Symbol Meaning Number of voice languages recorded.
CD/MP3/WMA/JPEG Operation Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics.
Playing CD Files After inserting a CD disc, files will play in the sequence of the directory. In playing back, you can press the numeric button on the remote control or touch a track on the onscreen directly to play. Fast backward/fast forward Touch the or on the screen to Fast backward or fast forward play. MP3/WMA Discs This player allows you to playback MP3/WMA files recorded on CDROM, CD-R, CD-RW, DVD+R/RW and DVD-R/RW.
JPEG picture 1. Browse picture via Anti-clockwise 2.
iPod Operation Accessing iPod Mode SRC) button on the 1. To switch to iPod mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until iPod appears at the top left corner of the screen. 2. Select the Main menu, then touch the iPod icon to select iPod as your source. iPod Instructions The touch keys on the screen for iPod playback are described below. 1. :Back to previous directory 2. :Go to root directory 3.
USB operation Accessing USB Mode SRC) button on the 1. To switch to USB mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until USB appears at the top left corner of the screen. 2. Select the Main menu, then touch the USB icon to select USB as your source. USB Instructions The touch keys on the screen for USB playback are described below,Icons defination see other modes.
SD operation Accessing SD Mode SRC) button on the 1. To switch to SD mode, press the Menu button on the front panel or the (SRC) remote control repeatedly until SD appears at the top left corner of the screen. 2. Select the Main menu, then touch the SD icon to select SD as your source. USB Instructions The touch keys on the screen for SD playback are described below,Icons defination see other modes.
Navigation Operation Accessing Navigation 1. Access the MAIN menu and select the NAVI button on the touch-screen to enter the Navigation Operation interface. 2. Press the remote control to switch the source to Navigation. 3. Press NAVI button on the front panel of the unit. Navigation Operation Please read the Navigation Software User Manual Follow the instructions on loading mapping information from the DVD-ROM to the SD Card in the Navigation Software User Manual.
Bluetooth Operation Before using the Bluetooth Before using the Bluetooth, it’s necessary to perform the following steps. For more operating details, refer to each section below. 1. Select the “Bluetooth” option in the General setup and select the “On” option to activate the Bluetooth feature. 2. Pair your mobile phone to this unit (refer to the “Pairing” operation). It is necessary to pair your phone to the unit. Without pairing, Bluetooth is not available.
1 ○ Current source indicator。 2 ○ Touch to return to the previous menu. 3 ○ Touch to access the dial interface. 4 ○ Touch to access the Phone book. 5 ○ Touch to access A2DP control menu. 6 ○ Touch to access Bluetooth setup. Phone Book Press the button to access the Phone Book. You can see phone book list, SIM book list, dialed call list, received call list, missed call list.
Manual If this function is set to Auto, connection between the Last Used phone and this unit will take place Connect Auto automatically as soon as the devices are less than a few meters apart. Pairing Access the Bluetooth setup and press “Handsfree” or “AV Unit”option on the screen, then “Wait pairing” displays on the screen. Now you can pair a phone with the unit. This unit can pair with 5 mobile phones in all, but just one can be active at a time.
End a call Touch the button to end a call.
Troubleshooting Problem GENERAL Unit will not power on Remote control does not function No/low audio output Poor sound quality or distortion Unit resets itself when engine is off TFT MONITOR No image Flashing image or interference appears on screen Prolonged image or improper height/width ratio display TUNER Weak station searching Cause Corrective Action Radio Fuse blown Car battery fuse blown Illegal operation Install new fuse with correct rating Install new fuse with correct rating Press the RESET b
Image blurred, distorted, or dark PBC cannot be used during VCD playback No repeat or searching while playing VCD MP3 Interruption occurred during playback Incorrect playback message displayed Error Messages Message Displayed Loading No Disc Bad Disc Unknown disc Region Error Error Disc is inserted upside down Disc is illegally copied Insert disc with label side up Use original disc PCB is not available on the disc PCB is on Turn PCB off Disc is dirty or scratched Clean disc or replace File is dam
Remote control Remote control does not function Battery is covered with insulation tape Battery depleted Battery installed incorrectly Pull out the insulation tape Replace battery with new one Remove battery and install correctly 1. When using the remote for the first time, you must pull out the insulation tape. 2. Remove the battery if the remote control is not used for a month or longer. Remove and dispose of the old battery immediately. Do not store the battery with metallic materials. 3.
Install the battery Insert the battery holder NOTE: Use only one CR2025(3V) lithium battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Do not recharge, disassemble, heat or dispose of the battery in fire. Keep batteries away from children to avoid the risk of accident. Suggestions 1. Only use a piece of clean silicone cloth and neutral detergent to clean the front panel or monitor.
Specifications CEA Power Ratings Main Amplifier Power Output: 20 watts RMS X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) MAX Power: 40 X 4 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.