Installation Guide

Alarm System Starter Kit
Model: SK-250
iPhone not included
Protect your Home the Smart Way!
User Manual
P/N: 101Y269-001 ©2017 SKYLINK GROUP.
1. Package Contents
1x Internet Hub 2x Motion
Sensors
2x Door/Window
Sensors
1x Keychain
Remote
Mounting
Accessories
2x Power
Adapters
1x Indoor Wireless
Pan & Tilt Camera
1x Ethernet
Cable
NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.
2. Install the Internet Hub
1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.
2. Plug in the Power Adapter.
3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)
3. Insert Batteries for Sensors
1. Slightly push both sides of the Door/Window Sensor and pull out the cover to insert an AAA-Battery.
2. Use a coin to open the Motion Sensor and insert an AA-Battery.
4. Download the SkylinkNet App
1. Tap on App Store 2. Tap on Search Icon and
search for “SkylinkNet.”
3. Tap on Free Button
to download the App.
4. When download is completed,
it will show on your HomeScreen.
NOTE: Only the “SkylinkNet” App will work with
the Internet Hub.
5. Create a SkylinkNet Account
1. Open the SkylinkNet App
and tap on “Create Account.”
2. Enter your information
and tap on “Sign Up.”
3. Check your email to activate
your account and tap on
“Continue” to log in.
4. Click on the link from the email to activate your account.
5. Now you are ready to
login to your account.
6. Set up the Internet Hub
1. Tap on “Set up Hub.” 2. Tap on “Initialize a
new Hub.”
3. Follow the instruction on
screen to connect the
Internet Hub.
5. Follow the instruction on
screen to reset the Internet
Hub and tap “Continue.”
4. Enter your information
and tap on “Continue.”
6. Hub is added and you will see
a green or red dot indicating if
it’s connected to the Hub.
7. Add Sensors and Keychain Remote
1. Go to “More” and tap
on “System Settings.”
2. Tap on “Setup Wizard.”
4. Tap on “Sensors” or
“Security Remote.”
3. Tap on “Add Device.”
5. Select the type of
sensor you want to add.
6. Name your sensor and
location and tap “Continue.”
7. Tap the “Learn Now”
button and follow the video
to activate the sensor.
(If you select Security Remote, skip to Step 6)
8. Now trigger the sensors
to test if the SkylinkNet App
is showing the sensor status
correctly.
NOTE: If motion is detected, a red
LED light inside the sensor will flash.
Sensor will not be triggered by new
motion unless no motion has been
detached for 15 seconds.