User Manual

Alarm System Starter Kit
Model: SK-200
iPhone not included.
Protect your Home the Smart Way!
Quick Guide
1. Package Contents 2. Install the Internet Hub
3. Insert Batteries for Sensors
4. Download the SkylinkNet App
.
Internet Hub Motion Sensor 2 x Window/Door Sensor
Keychain Remote
Mounitng
Accessories
Power Adapter Ethernet Cable
1. Connect your Hub to an available Port on your Internet Router using the Ethernet cable.
2. Plug in the Power Adapter.
3. Insert 4 x AAA-Batteries in the Hub for backup power in case of power outage. (Optional)
1. Slightly push both sides of the Window/Door Sensor and pull out the cover to insert an AAA-Battery.
NOTE: 6 x AAA- and 1 x AA-Batteries required to setup the SkylinkNet Alarm System.
2. Use a coin to open the Motion Sensor and insert an AA-Battery.
1. Tap on App Store 2. Tap on Search Icon and
search for “Skylinknet”
3. Tap on Free Button
to download the App.
4. When download is completed,
it will show on your HomeScreen.
NOTE: Only the “SkylinkNet” App will work with
the Internet Hub.
5. Create a SkylinkNet Account
1. Open the SkylinkNet App
and tap on “Create Account”.
2. Enter your information
and tap on “Sign Up”.
3. Check your email to activate
your account and tap on “Continue”
to log in.
4. Click on the link from the email to activate your account.
5. Now you are ready to
login to your account.
6. Set up the Internet Hub
1. Tap on “Set up Hub >”.
2. Tap on “Initialize a
new Hub >”.
3. Follow the instruction on screen
to connect the Internet Hub.
5. Follow the instruction on
screen to reset the Internet
Hub and tap “Continue”.
4. Enter your information
and tap on “Continue”.
6. Hub is added and you will
see a green or red dot indicating
if it’s connected to the Hub.
7. Add Sensors and Keychain Remote
1. Go to “More” and tap
on “System Settings”.
2. Tap on “Setup Wizard”.
4. Tap on “Sensors” or
“Security Remote”.
3. Tap on “Add Device”.
5. Select the type of
sensor you want to add.
6. Name your sensor and
location and tap “Continue”.
7. Tap the “Learn Now”
button and follow the video
to activate the sensor.
(If you select Security Remote, skip to Step 6)
8. Now trigger the sensors
to test if the SkylinkNet App
is showing the sensor status
correctly.
NOTE: If motion is detected, a red
led light inside the sensor will flash.
Sensor will not be triggered by new
motion unless no motion has been
detached for 15 seconds.
P/N : 101Y250 Rev:1 | ©2014 SKYLINK GROUP.