User's Manual

ManualsBrandsSKYDROID ManualsElectronicsH16 remote control

SKYDROID H16

User Manual V1.0

Attention

This product uses the following terms to classify the potential hazards that may be caused by

improper operation.

Note: If not follow the instructions, it may cause property damage and minor injuries.

Note: If not follow the instructions, it may cause property damage, major accidents and serious

injuries.

Warning: Misuse of this product may result in injury, damage or loss of property. Read the

manual carefully before using this product. This item is not a toy. This item is intended for use by

professional UAV operators and installers only. Donot use this product if you lack the knowledge

and expertise to install and maintain UAV radio equipment. Do not use unapproved or unofficial

components with this system. Operators must strictly follow the operation guides set forth in this

manual. Skydroid does not accept any liability for the use or misuse of this product.

Overview

1：Product Features

（1）The H16 series uses the newest surging processor, equipped with an Android

embedded system and advanced SDR technology, also with a super protocol stack to make the

image clearer, lower latency, longer distance transmission, and stronger anti-interference. Wildly

applied for drones, Robots, industrial controlled equipment, etc.

（2）Supports rich interfaces such as HDMI, RJ45, sensor interface, dual serial ports

passthrough transmission, SBUS, aerial photography, FPV security, fire protection, power,

mapping robot, border control, etc.

（3）IP67 design, based on waterproof, dust free and drop-resistant materials and structure

to ensure its great using feel and durability

（4）H16 uses 7-inch FHD high-brightness display, 1800 nits brightness IPS LCD screen, which

can be viewed clearly under the sun. Supports 1080P high-definition digital image transmission.

The dual-antenna signals complement each other, with super-strong signals and ultra-long

transmitting distances, combined with algorithm control and out-of-step frequency hopping

algorithms, greatly increasing the ability to communicate with weak signals.So you don’t need to

worry about the flight distance during flight operations, just explore a wider scenery.H16’s video

transmission distance is around 5-10km, H16 Pro’s video transmission distance is around

20-30KM.

（5）Integrated with high energy density lithium ion battery, 18w fast charging, can work for

8-15 hours after 2 hours of charging. The consistent survival thinking in the wilderness allows you

to have no concerns about the reliability of our equipment.

（6）H16/H16 Pro supports rich interfaces such as HDMI, RJ45, sensor interface, dual serial

port passthrough transmission, SBUS, etc. And supports many brands cameras, pan-tilts, pods

and other video equipment. Provide development kit, SDK and technical support, support video

suspension, support ground station of mainstream flight control, support QGC and wireless RTSP

video stream sharing.

Summary of content (14 pages)

PAGE 1
SKYDROID H16 User Manual V1.0 Attention This product uses the following terms to classify the potential hazards that may be caused by improper operation. Note: If not follow the instructions, it may cause property damage and minor injuries. Note: If not follow the instructions, it may cause property damage, major accidents and serious injuries. Warning: Misuse of this product may result in injury, damage or loss of property. Read the manual carefully before using this product. This item is not a toy.
PAGE 2
（7）The use of weather silica gel, frosted rubber, stainless steel, and aviation aluminum alloy makes the extreme operating feel, and also meets the harsh conditions of outdoor use of drones. H16 is dust-free and waterproof in the fuselage, control switches, and various peripheral interfaces.
PAGE 3
Number Annotation Number Annotation 1 2.4G 3dB antenna 10 Toggle 3 positions switcherSW4 11 Toggle 3 positions switcherSW3 2 3 Toggle 3 positions switcher Toggle 3 positions switcherSW1 4 Left stick X1. Y1 5 Little stick X3. Y3 6 Power switcher 7 6 positions switcher 8 Key button 9 SW2 Right stick X2.
PAGE 4
Number Annotation Number 1 Network port 6 2 Power and Sbus input 7 3 Type-C 8 MIPI 摄像头接口 4 TF slot 9 HDMI input 5 Button for binding 5、Environment conditions Pay attention A） Working temperature b） Storage temperature Annotation Uart 0 Uart1
PAGE 5
c） Relative humidity d） Atmospheric pressure e） Working environment should not contain explosive material or any corrosive or harmful gas may cause interference in the operation of the product. f） Always work under shelter to prevent rain, snow, wind, sand and dust contamination. 6、Working conditions Power supply and attentions H16 series uses a built in Li-ion battery.
PAGE 6
② Once entering language and input methodchoosing, you can add/cancel/choose the language you want Part two
PAGE 7
Status bar ①②③④ ⑤ ⑥ ⑦ ① Icon for connecting internet by network port or USB ② Icon for connecting well between the TX and RX (icon in picture shows no connecting with RX) ③ Icon for Power level ④ Icon for Time ⑤ Icon for return ⑥ Icon for back home ⑦ Icon for back ground management/screen splitter Part three H16 Helper ① ② ③ ④ ⑤ ① ② ③ ④ ⑤ Switch the joystick operation mode of the remote control Check whether the value of each channel of the remote control is normal or not You can view MIPI, HDMI, UAR
PAGE 8
Part four Binding operation ① After powering on the receiver, wait 3-5 seconds, then press and hold the receiver “SET”, and release “SET” when the white light flashes ② Enter the H16 helper, click on the “binding”, click on the “binding” (after the binding is successful, it will show “connected”) Part five Video/Image connection and settings ① The factory default setting is HDMI/MIPI mode, which is used to display the video/image transmitted through MIPI/HDMI from the receiver ② UART VIDEO mode, to displ
PAGE 9
Joystick calibration Click on the rudder value in the H16 helper to view, and refer to the value for calibration ① When the remote controlscreen is completely off, center the knob. Long press the C and D keys in the six-position switcher, then slide the screen up and wake up the screen ② Release the C and D keys, and long press the D key.
PAGE 10
Showing MIPI, HDMI video/image ① Enter “rtsp://192.168.0.
PAGE 11
How to share internet, video/image transmission and data/telemetry transmission ① Sharing network When the remote control is connected to the Internet via the USB wireless internet card, the hotspot of the remote control can be turned on for network sharing ② Sharing data transmission （1）Turn on the hotspot of the remote controller （2）Connect the hotspot by PC （3）UDP Open Mission Planner, choose the connecting way into UDP （4）Click “connect” and select 14550 for the port number and click “OK”.
PAGE 12
① ② ④ ⑤ ③ ⑥ （4）Download VLC exe. to show video/image （5）Open VLC and choose network streaming （6）Enter “rtsp://192.168.43.
PAGE 13
② ③ Q&A 1. Can the remote control install other apps? The permissions of the remote control are all open, and there is no special software or restricted software installation and uninstallation. 2. How does the remote control enter the fast charge mode? Only under using the original charger to enter the fast charge mode, and there is a text prompt on the lock screen interface 3.
PAGE 14
Please check if there is a hotspot connected to the remote control 3、Maintenance, servicing Storage for not using certain period Put H16/H16 Pro in a dry and ventilated area. No direct sun light to prevent harm to the internal li-ion battery. If store it over three months, it is highly recommended to put room temperature between 22℃to 28 ℃.