Use Instructions

CA310 Manual
1. Foreword: CA310 is a knife-type protective film cutting machine. Compared with laser
protective film cutting machine, it has the following advantages:
A. Environmental protection, does not produce soot and exhaust gas, can be used in any place,
can be widely used in shopping malls, stores;
B. The edges of the cutting protective film are fine and without burrs, and the customer
experience is good;
C. The machine is light and easy to carry, generally only 5 kg is conducive to carrying operations.
2. Instructions for use
A. Plug in the matching power adapter and turn on the machine, the built-in APP will start
automatically;
B. After the machine is started, set WIFI to connect to the network (you can only cut the models
that data have been downloaded if there is no network,);
C. Put the matching membrane material into the designated position of the machine;
D. Select the corresponding mobile phone or film model to be cut through the machine APP, and
click to start cutting;
E. At this time, the machine will move to cut the corresponding graphics, and the blade will
return to the far left after finishing cutting.
3.FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located for operating in
conjunction with any other antenna or transmitter.