BTI-020V Bluetooth transmitter and receiver all in one user manual Welcome to use Bluetooth trans mitter/ recei ver BTI-020V. Introduction BTI-020V is a Bluetooth transmi tter and recei ver all in one function adapter ,when used as a Bluetooth trans mitter, i t can transfer the musi c on your mobile ,Walkman,TV,computer ,etc to your Bluetooth recei ver,Stereo Bluetooth headphone,and Bluetooth spea kers ,ect ,through wi reless technology.
A, Bluetooth trans mitter side B, Bluetooth recei ver side C, Mul ti -function button D, LED indi ca tor E, 3.5MM audio port (AUX) F, Mi cro USB cha rging port Specification: Model Bl uetooth version BTI-020V V4.1,ClassⅡ Chi pset Frequency Bl uetooth recei ver working time Bl uetooth tra nsmi tter working time Full cha rging ti me Bl uetooth profile Supports (in Bluetooth trans mitter mode) CSR BC8670 2.402GHz-2.480GHz Approx. 12 hours Approx. 13 hours Approx.
Ba ttery Cha rging suppl y 48kHZ CODEC (headset or speaker must also support APT-X ); Two connections , i t will s witch to SBC CODEC automa ti cally 250mAH rechargeable lithium ba ttery 5VDC,100-240V AC a dapter,≥300MA Working tempera ture Net weight Di mension -10—55℃ Approx. 18g 43.8*43.8*12.4mm Preparation bef ore using 1, Before going to use BTI-020V, please full cha rge BTI-020V ,Walkman, mobile, TV,Computer ,ect whi ch support 3.5MM AUX devi ces.
Basic operation 1. power on : In off s ta te, press MFB a round 3 seconds, Blue LED flashes twi ce, BTI-020V is powered on. (If BTI-020V did not connect wi th any devi ce, it could enter into pai ring mode qui ckl y with Blue LED flashes a fter power on) 2. Power off : In on s ta te, press MFB a round 3 seconds, Red LED flashes twice ( if release after Red LED immediatel y, Red LED ma y onl y flashes once), BTI-020V power off.
turn off , because the unit is still having power, if switching to TX or RX mode immediately, it will enter into the previous power off mode to re-turn on BTI-020V worked as Bluetooth Receiver can stay 8 paired devices record , the latest paired records will take over the over paired records. 1. Power on: In off s ta te, long press MFB a round 3 seconds , after Blue LED flashes twice, BTI-020V is powered on.
Power on Bl ue LED flashes twi ce quickl y Pai ring Bl ue and Red LED flashes alterna tel y Unconnected s tandby mode Blue LED flashes twi ce every three seconds Connected s tandby mode Solid Blue LED Low vol ta ge Red LED flashes qui ckl y Cha rging Solid Red Full y cha rged Red LED turns off How to use it as a Bluetooth transmitter BTI-020V and stereo Bluetooth headphone or Bluetooth speaker (A2DP enabled) work on the TV A, Make the Bluetooth speaker or Bluetooth headset i n pairing mode
successful and the volume of headset or speaker is bi g enough, you will hea r a “zi ,zi” sound, i t means BTI-020V and Bluetooth spea ker or Bluetooth headphone and cables a re ok, the problem ma y be on the computer. Note: Passcode for supported Bluetooth headset, Bluetooth receiver, Bluetooth speaker etc. is ”0000”,”1234”,”1111”,”8888” BTI-020V and Bl uetooth headset or Bluetooth speaker tha t supported A2DP worked on other audio devi ce whi ch supports headset profile).
BTI-020V BTI-020V BTI-020V CSR 8645 CSR 8610 CSR BC57F687A05 CSR 8645 CSR 8645 CSR 8645 pass pass pass BTI-020V CSR 8645 CSR 8640 pass BTI-020V ISSC1681S CSR BC8645 pass BTI-020V CSR BC57E687C CSR 8645 pass BTI-020V CSR BC8635 CSR 8645 pass BTI-020V WS9623 CSR 8645 pass BTI-020V BTI-020V BTI-020V CSR 8645 CSR 8610 CSR BC57E687C BK 8006 CSR 8610 CSR 8610 pass pass pass BTI-020V CSR 8640 CSR 8610 pass BTI-020V ISSC1681S CSR 8610 pass BTI-020V BC57F687A05 CSR 8610 pass B
BTI-020V CSR BC57E687C ISSC1681S pass BTI-020V CSR BC57E687C BK 8006 pass BTI-020V WS9623 WS9623 pass BTI-020V WS9623 BK 8006 pass BTI-020V connect with two device simultaneously while working as a Bluetooth receiver BTI-020V could connect with two mobile phone simultaneously (but could not play music from two mobile phone at the same time. you could choose any mobile phone to play music, but it need to pause or end the music from other mobile phone ) A.
1. Keep the uni t a wa y from children . 2. Maintain equipment dry, rai n, mois ture and all kinds of liquids or moisture can contain minerals, corrode electroni c ci rcuit. 3. If the devi ce is wet, please make i t completel y dry. 4. Do not use or put the devi ces in dus t or di rt s tora ge , i t will da mage the deta chable pa rts and electroni c components . 5.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.