Stereo Bluetooth Headset M102 User Manual
Catalog 1.Product Overview------------------------------------------------------------ -1 2.Basic Operation----------------------------------------------------------------2 3.Bluetooth Pairing and Connection------------------------------------------- 3 4.Connection with Two devices------------------------------------------------ 4 5.LED Indicator----------------------------------------------------------------- 5 6.Charging---------------------------------------------------------------------- 6 7.
1. Product Overview 包装清单 Packing list： A. Bluetooth Headset M102 x 1 B. Type-C charge cable x 1 C.
2. Basic Operation Button Function Operation Instruction In off status, toggle the switch to the ON side to power on. Power On M102 will enter paring mode automatically (will enter reconnect mode automatically if have paring record),the Boot prompt sound "Power ON". Power Off In on status, toggle the switch to the OFF side to power off, the shutdown prompt sound "Power OFF" 1. After starting up, Red & Blue lights flicker alternately to enter the pairing mode. Enter Pairing Mode 2.
Reject a call Volume + Volume Up When a call incoming, long press for 1 second to reject a call. Short press.（the maximum with the prompt “Di”） Next Song Long press for 1 second. Volume Down Volume - Microphone Mute Button Short press. Previous Song Long press for 1 second. Microphone Mute When during a call, short press button to mute, press again to cancel. 3. Bluetooth Pairing and Connection A.
4
1. Pairing: toggle the switch to On to enter pairing mode with LED Blue & Red alternately flash. 2. Search and click to connect “ M102” on your phone Bluetooth lists. 4. Connection with Two devices The mobile phones connected to M102 are divided into two sets: Machine A and Machine B. Connect machine A first, and toggle the switch to On to enter pairing mode, torn on the Bluetooth of machine A and search for the device, search for “M102”and then click to connect.
Mode LED Indicator Power on Blue LED flash 2 times Power off Red LED flash 2 times Pairing mode Red & Blue LED flash alternately Connected standby mode Blue LED flash once every 10 seconds Playing Music Blue LED flash once every 10 seconds Talking Blue LED flash once every 10 seconds Delete pairing record Red & Blue LED are on for 1 second at the same time Solid Red LED (Charging in the power-on status Charging will overlap with the Bluetooth function state light, which is a normal phenomen
Type-C charging cable / Charging with charger / Charging with PC *Note： Please charge the M102 at least one time every 2 months when don’t use it. 7.
Enter paring mode Pairing Pair successfully Paired Connect successfully Your headset is connected Disconnect Your headset is disconnected Power off Power off Microphone mute on mute on Microphone mute off mute off Low battery Battery Low 8.Product Specification Bluetooth Version Bluetooth V5.0 Bluetooth Chipset QCC3024 Operation Range 10 meters Bluetooth Protocols A2DP\HFP\HSP\AVRCP CODEC SBC,AAC Charging Time About 2 hours Stand-by Time About 200 hours Working Time ( Talking
9. Attentions and Q & A A． How to reconnect and operation when failed to reconnect？ When M102 connected with your mobile phone successfully at the first time, it will search and reconnect the paired device automatically when power on, If failed, please pair and connect again. M102 can be reconnect in 10 minutes, will be power off if over 10 minutes. It will have a tone “Your headset is connect” after over operation range disconnect. B.
2. Call coming during the call, double press the MFB to answer the new call and keep the current call; 3. Call coming during the call, long press the MFB for 2 seconds to reject the new call. 4. When you are on a three-party call, double press the MFB to switch audio between the current call and the keep call. H. Wired mode The headset is plugged into a USB cable that can transmit data, and the other end of the USB cable plugs into the USB port of the computer or TV.
