Contents 1 Safety Precautions ................................................. 2 2 Overview ................................................................ 4 3 Installing the SIM card .......................................... 5 4 Installing the battery .............................................. 7 5 Installing the storage card ..................................... 7 6 Charging ................................................................. 8 7 Power on / Power off ...................................
1 Safety Precautions Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
Electronic equipment: To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment: Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant.
2 Overview Front and Side panels Headphone Jack Micro USB Port Touch Screen Earpiece Front Camera 4
Power Button Volume +/- Button Menu Button Home Button Back Button Microphone Back Panel Back Camera Flash Light Speaker 3 Installing the SIM card You need to remove the back cover before you can 5
install the SIM card and battery. Also, make sure to always turn off the power before installing or replacing the SIM card and battery. To prize up the back cover 1) Make sure your device is turned off. 2) Use your nail or pick to open up the back cover, since there is a slot at the right bottom corner of back cover. To install the SIM card Your device is supported both 2G and 3G (WCDMA) SIM cards. 1) Remove the battery if it is installed.
4 Installing the battery 4) Align the battery’s exposed copper contacts with the battery connectors at the right top part of the battery compartment. 5) Insert the contacts side of the battery first and then gently push the battery into place. 6) Replace the back cover. To remove the battery 1) Make sure your device is turned off. 2) Remove the back cover. 3) The bottom of the phone has a notch. Lift the battery by the notch to remove it.
1) Make sure that your device is turned off, and then remove the back cover. 2) Remove the battery if it is installed. 3) Locate the memory card slot on the upper part of the exposed Left panel. 4) Insert the memory card into the slot according to the indication icon. To remove the memory card, perform converse installations. Note: make sure the power is off before inserting or removing the memory card to avoid damages. 6 Charging New batteries are shipped partially charged.
Plug the DC end of adapter to the micro USB port of the device and plug the AC end to the wall socket for charging. Normally it takes approximately 3~5 hours to fully charge the device. Operating the device during charging with the AC adapter may extend the time of full charging. 7 Power on / Power off 1) To turn on the device, press and hold the Power button until you see the start-up screen then release, it will automatically enter the Home screen.
8 Android Home Screen Guides Notifications & quick settings: hold and slide down Web information search Shortcuts: touch to open; touch & hold to move Explore browser Call Contacts APPS menu Message 9 Changing OSD Language & System Time On the Home menu tap on the icon and select Settings icon to access the list of options.
Select Settings---Language & input---Language to change OSD language. Select Settings---Date & time to change system time. 10 Connecting to Wi-Fi On the Home menu tap on the icon and select Settings icon to access the list of options. Select Wireless & Networks. If the Wi-Fi is off, tap on the Wi-Fi line to turn it on. The device will scan for available Wi-Fi networks and display them on the screen. Tap on the network you want to connect to.
11 Transferring Contents from PC Connect the device to your PC/Notebook via USB cable. If the network of your PC/Notebook is on, it will install the required driver automatically then tap "Turn on USB storage" on the screen to turn on USB storage function. Select the contents you want to transfer from your PC/Notebook. Drag the contents from the PC/Notebook to the device. Please do not disconnect the USB cable during loading. It may cause malfunction of the device and files.
Disconnect all external devices and then send to the service center for advice. Q2: How to check the device if it won’t turn on? Aφ If the power is low, connect the adapter to charge. Remove the micro-SD card and any other external device. Q3: How to restore the factory default settings? AφGo to Settings---Backup & reset---Factory data reset to recover the system to the default status.
disabled? (Applicable only for model with Bluetooth and 3G function) A˖Check if the “Airplane mode” is enabled, if it is then the Bluetooth and 3G function can’t be activated. 13 Technical Specifications Processor MT6582M RAM (#) 512MB LPDDRII Storage capacity(#) EMMC 4GB Size Resolution Camera Communications Operating Temperature 4.5’’ FWVGA LCD, Capacitive Multi-touch 480h854 pixels Front: 2.0M pixel; Back: 8.0M pixel Wi-Fi (802.11 b/g/n), Bluetooth (BT4.
Adapter Output Power (maximum) AC 100~240V; DC 5V/1A ≤5~10W Battery 1850mAh Weight About 140g Li-ion battery Dimension 136 x 66.5 x 9mm Notice The # symbol means that the item is optional.
Contenido 1 Advertencias de seguridad .................................... 2 2 Vista general…………………………………….5 3Instalación de la tarjeta SIM……………………..7 4Instalación de la batería………………………….8 5Instalación de la tarjeta de almacenamiento……..9 6Carga……………………………………………10 7Encender y apagar……………………………...10 8Guías para la pantalla de inicio del Android…...12 9Cambiar el idioma OSD y el sistema horario…..13 10 Conectar a Wi-Fi……………………………..
Aviso Tanto las fotos como la información sobre la apariencia del teléfono, como el color y características del diseño que se encuentran en el manual, son solo referenciales. Se reserva el derecho de cambiar la apariencia y los parámetros técnicos del producto sin previo aviso. 1 Advertencias de seguridad Nunca intente desarmar el teléfono. Es su responsabilidad el uso que haga del teléfono y cualquier consecuencia resultante del mismo.
apagar el teléfono cuando así se lo solicite la tripulación de cabina o las señales de advertencia. Seguridad personal: Para prevenir posibles daños auditivos, no escuche a volumen alto por periodos prolongados. Materiales explosivos: Por favor cumpla con las señales de advertencia en las estaciones de servicio donde se le solicita apagar el teléfono.
normas de exposición de radiofrecuencia cuando se utiliza de la siguiente manera: • Cerca del oído: Realice o reciba una llamada y sostenga el teléfono como lo haría con un teléfono de línea fija. • Al portar el teléfono en el cuerpo: Al transmitir, coloque el teléfono en un accesorio portable que no contenga metal y ubíquelo a un mínimo de 2.5 cm del cuerpo. El uso de otros accesorios puede no asegurarle el cumplimiento con las normas de exposición de radiofrecuencia.
2 Vista general Panel frontal y lateral Conector para auriculares Puerto micro USB 5
Pantalla táctil Auricular Cámara frontal Botón de encendido Botón volumen +/Botón menú Botón inicio Botón atrás Micrófono Panel posterior Cámara posterior Linterna Altavoz 6
3 Instalación de la tarjeta SIM Necesita retirar la tapa posterior antes de instalar la tarjeta SIM y la batería. También, asegúrese de siempre apagar el teléfono antes de instalar o reemplazar la tarjeta SIM o la batería. Levantar la tapa posterior 1) Asegúrese de apagar el dispositivo. 2) Utilice la uña u otro objeto para levantar hacia arriba la tapa posterior, ya que hay una pequeña ranura en la esquina inferior derecha de la tapa posterior.
3) Deslice completamente la tarjeta SIM en la ranura. 4 Instalación de la batería 4) Alinee los contactos de cobre expuestos de la batería con los conectores de batería en la parte superior derecha del compartimento para la batería. 5) Primero inserte el lado de los contactos de la batería y luego presiónela suavemente en su lugar. 6) Vuelva a colocar la tapa posterior. Para retirar la batería 1) Asegúrese de apagar el dispositivo. 2) Retirar la tapa posterior.
hendidura. Para retirar la batería levántela por la hendidura. 5 Instalación la tarjeta de almacenamiento Para contar con almacenamiento adicional para sus imágenes, videos, música y archivos, puede comprar una tarjeta de memoria e instalarla en el dispositivo. 1) Asegúrese de apagar el dispositivo y retire la tapa posterior. 2) Retire la batería si es que está instalada. 3) Ubique la ranura de la tarjeta de memoria en la parte superior del panel expuesto de la izquierda.
instalación en sentido contrario. Nota: Para evitar daños asegúrese que el teléfono esté apagado antes de insertar o retirar la tarjeta de memoria. 6 Carga Las baterías nuevas ya vienen parcialmente cargadas. Antes de utilizar el dispositivo, se recomienda instalar y cargar la batería. Algunas baterías se desempeñan mejor después de varios ciclos completos de cargas y descargas.
aparezca la pantalla inicial y luego suelte, automáticamente entrará a la pantalla de Inicio. Si es la primera vez que lo utiliza, ingresará al menú de guía para su configuración. 2) Presione el botón de Encendido una vez para ingresar al modo de reposo y presiónelo otra vez para abrir el dispositivo. 3) Presione y mantenga el botón de Encendido, y luego toque OK para apagar el dispositivo. Aviso Si el sistema se detiene, presione y mantenga el botón de Encendido hasta completamente.
8 Guías para la pantalla de inicio del Android Notificaciones y configuraciones rápidas: para abrir mantenga y deslice hacia abajo.
9 Cambiar el idioma OSD y el sistema horario En el menú de Inicio tocar el ícono y seleccione el ícono Configuraciones para acceder a la lista de opciones. Seleccionar Configuraciones---Idioma y entrada---Idioma para cambiar el idioma OSD. Seleccionar Configuraciones---Fecha y hora para cambiar la hora del sistema. 10 Conectar a Wi-Fi En el menú Inicio tocar el ícono y seleccionar el ícono Configuraciones para acceder a la lista de opciones. Seleccionar Redes inalámbricas.
contraseña de la red inalámbrica, ingrese la información requerida de la red, luego presione Ingresar---Conectar. Ahora el dispositivo intentará establecer una conexión al punto de acceso Wi-Fi con los parámetros de la red ingresados. 11 Transferir contenido desde la PC Conectar el dispositivo a la PC/laptop a través del cable USB.
Haga click con el botón izquierdo en en la parte inferior derecha de la PC/laptop para desconectar el dispositivo de manera segura. 12 Solución de problemas Q1: ¿Qué pasaría si se moja el dispositivo? Aφ 1) NO encienda el dispositivo. 2) Desconecte el cable de salida con el fin de interrumpir el suministro de energía, en vez de presionar el botón de encendido. Desconectar todos los dispositivos externos y luego enviarlo al centro de atención para solicitar asistencia.
el sistema recuperará la configuración por defecto. Q4: ¿Cómo prolongar el tiempo de uso de la batería? Aφ Ajuste el brillo de la pantalla táctil a un nivel adecuado en Configuraciones---Pantalla--menú Brillo. Baje el volumen. Configure el tiempo de reposo a un nivel adecuado en Configuraciones--- Pantalla--menú Reposo. Q5: ¿Qué hacer si las tarjetas SD o SIM micro no se pueden leer? A: Por favor apague el dispositivo y reinserte la tarjeta.
13 Especificaciones técnicas Procesador MT6582M RAM (#) 512MB LPDDRII Capacidad de almacenamiento(#) Tamaño Resolución Descripciones Comunicaciones Operación Temperatura EMMC 4GB 4.5’’ FWVGA LCD, Multi-táctil capacitiva 480h854 pixeles Frente: 2.0Mpixel; posterior: 8.0M pixel Wi-Fi (802.11 b/g/n), Bluetooth(BT4.
Adaptador Potencia de salida (máxima) AC 100~240V;DC 5V/1A ≤5~10W Batería 1850mAh Li-ion batería Peso Alrededor de 140g Dimensión 136 x 66.5 x 9mm Aviso El símbolo # significa que dicho ítem es opcional.
)&& :DUQLQJ $Q\ &KDQJHV RU PRGLILFDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\ UHVSRQVLEOH IRU FRPSOLDQFH FRXOG YRLG WKH XVHU V DXWKRULW\ WR RSHUDWH WKH HTXLSPHQW 7KLV GHY LFH FRPSOLHV Z LWK SDUW RI WKH )&& 5XOHV 2 SHUDWLRQ LV VXEMHF W WR WKH IROORZLQJ WZR FRQGLWLRQV 7KLV GH YLFH PD \ QR W FDXVH KDU PIXO LQWHUIHUHQFH DQG WKLV GHY LFH PXVW DFF HSW DQ \ LQWHUIHU HQFH UHF HLYHG LQFOXGLQJ LQWHUIHUHQFH WKD W PD\ FDXVH XQGHVLUHG RSHUDWLRQ 6SHFLILF $EVRUSWLRQ 5DWH 6$5