HOME+ SIMS HPC01 User Manual
1. 2. Key Features Stunning video quality. 102 °Wide field of view. Set up your camera directly from your Smart device. Live stream via your Smart Device.
. 11 Mount Slots 12 Reset Button camera on a smooth surface Attach the camera to the Mounting bracket Reset the camera Connect your Camera to an External Power Supply Plug the included AC adaptor into the USB cable and plug it into an outlet. Plug the USB cable into the port on your camera and place it wherever you want. 1. The camera will automatically turn on after connecting to an external power supply. 2.
Plug it in and connect to your Wi-Fi network. You’re ready to begin live streaming! Please refer to the “Help” page of the home+ app to download, operate, and utilize the full capabilities of the App. 5. Mount your Camera on a Wall or Ceiling Your camera can stand on flat surface, besides, it can be mounted on any wall or ceiling. Simply: 1. Attach the mounting bracket to your wall or ceiling by using the screws and wall insert included in the box.
6. Specifications Wireless 802.11 b/g/n Lens Wide angle Video Resolution 720p (1280x720) WVGA (848x480) WQVGA (432x240) Video Format H.264 Photo Resolution 1MP White Balance Auto Night Vision Around 6 meters Microphone Built-in Speaker Built-in,1W,8 ohm Motion Detection Yes Image Sound Detection Yes Power AC/DC adapter Input Voltage AC:100-240V/50-60HZ Output Voltage DC:5V/1.0A Compatibility IOS 6.0/Android 4.
8. Troubleshooting Problem Cause 1. Limited upload bandwidth Camera disconnects 2. Distance between the from Wi-Fi network router and the camera is far 3. Wi-Fi interference Fail to view videos using your smart device 1. Wi-Fi disconnection 2. This camera is not properly connected Status LED lights up Disconnection in Red with AP Solution 1. Check with your internet service provider 2. Move your camera closer to your router 3. Reduce the number of connected devices near the camera 1.
FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.