sd605 Manual
Manual Version July 2005 sd605 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Grödig/Salzburg Telephone +43 6246 888-0 Telefax +43 6246 888-7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2005 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKIDATA AG.
Manual Sd605 FCC 15.21: IMPORTANT: Any changes to or modifications of the sd605, including antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. IMPORTANT: Any changes to or modifications of the sd605, including antenna, unless expressly approved by SKIDATA™, may void the user's authority to operate this device. The final product should contain labelling according to FCC requirements. For example: This device complies with Part 15 of the FCC rules.
Manual Page 4 sd605 © SKIDATA AG, July 2005
sd605 1 1 sd605 Version 1.
1 1.1 Page 2 sd605 Contents 1.1 Contents 1.1 Contents 2 1.2 General 3 1.3 1.3.1 1.3.2 sd605 front view rear view 4 4 4 © SKIDATA AG, Version 1.
sd605 1 1.2 General 1.2 General The sd605 is a Radio Transceiver Module (RFID module) which is designed for installation in SKIDATA devices by SKIDATA AG only. The module is not to be sold as an individual product. The sd605 must be connected to the appropriate devices by means of the plug-in connector provided for this purpose. The illustrations show the plug-in boards for 5 V DC power supply and the data transfer line, as well as the plug-in parts for the antennas.
1 sd605 1.3 sd605 1.3 sd605 1.3.1 front view Fig. 1: front view sd605 125 kHz Ant2 13 Mhz Ant2 125 kHz Ant1 13 Mhz Ant1 Power / RS232 1.3.2 rear view Power / RS232 (0 V / 5 V) Fig. 2: rear view sd605 Page 4 © SKIDATA AG, Version 1.
