Mechanics 450 Manual
Manual and operational description Version November 2003 Mechanics 450 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Gartenau Telephone +43-(0)6246 888 - 0, Telefax +43-(0)06246 888 - 7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2003 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKIDATA AG.
Manual and operational description Mechanics 450 FCC 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC 15.
Manual and operational description Mechanics 450 Mechanics 450 1 Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 4 1.
1 Mechanics 450 1 Mechanics 450 Version 1.
1 1.1 Page 2 Mechanics 450 Contents 1.1 Contents 1.1 Contents 2 1.2 Electrical connections of the device 3 © SKIDATA AG, Version 1.
1 Mechanics 450 1.2 Electrical connections of the device 1.2 Electrical connections of the device Coder Mechanism 450 is a component designed for installation in SKIDATA™ devices. Operating the mechanism without its original enclosure or in devices not certified by SKIDATA AG for this purpose is prohibited. Coder Mechanism 450 must be connected to the appropriate devices by means of the plug-in connectors provided for this purpose.
1 1.2 Page 4 Mechanics 450 Electrical connections of the device © SKIDATA AG, Version 1.
