Coder MC BASIC 400 Manual
Manual and operational description Version April 2004 Coder MC BASIC 400 SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Gartenau Telephone +43 6246 888 - 0 Telefax +43 6246 888 - 7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2004 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKIDATA AG.
Manual and operational description Coder MC BASIC 400 FCC 15.19: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC 15.
Manual and operational description Coder MC BASIC 400 Coder MC BASIC 400 1 Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version Date 1 4 1.
1 Coder MC BASIC 400 1 Coder MC BASIC 400 Version 1.
1 1.1 Page 2 Coder MC BASIC 400 Contents 1.1 Contents 1.1 Contents 2 1.2 Electrical connections of the device 3 © SKIDATA AG, Version 1.
1 Coder MC BASIC 400 1.2 Electrical connections of the device 1.2 Electrical connections of the device Fig. 1: Connections Coder MC BASIC 400 Fig. 2: Coder MC BASIC 400 © SKIDATA AG, Version 1.
1 1.2 Page 4 Coder MC BASIC 400 Electrical connections of the device © SKIDATA AG, Version 1.