User's Manual

Albert dongle
Table of contents
7. Cradle Install Method
Mount the cradle on the Albert’s
stomach area as indicated in
the direction of the arrow
100 × 105 × 130 mm
330g
Full-color LED for eye × 2
Proximity sensor × 2
Optical ID sensor
Touch sensor
3-axes acceleration sensor
Light Sensor
Temperature sensor
Battery level sensor
Stepping Motor × 2
Speaker (1.5W)
Bluetooth 4.0 BLE
DC 5V / 3.7V (Battery Voltage)
4 hours on average
1.Summary
2.Service Support Guide
3.Precautions
• Handling precautions
• Installation precautions
4.Components of UO Albert
5.Name and Role of each part
6.Product Specification
7.Cradle Install Method
8.How to turn on/off power
9.How to charge product
10.Install Method
•Install Launcher(Android App)
•Install Contents App
11.How to connect device
12.Bluetooth signal lamp status
13.Connecting Albert to USB dongle
14.A/S guide
15.Exchange / Refund guide
WARRANTY
1.Summary
Smart Robot Albert is a personal service robot
with analog sense applied on digital technology
which helps children’s creativity and intelligence
improvement by generating direct physical
activity using the five senses.
2. Service Support Guide
• The Smart Robot is available on any Android
OS device irrelevant of telecom carrier.
• It is available in and outside of the country
when you install the App, and its availability
is irrelevant of membership status of telecom
carrier.
• It functions normally on Android OS devices
with Kitkat(Ver .4.4) or above.
• Please check the list of supported device
for the App in the Customer Service Center
before purchasing the product.
• The recommended device models are
continuously updated.
For further information please contact the
Customer Service Center.
4. Contents of UO Albert
• Smartphone and charger is not included
in the content. Please make sure to use
the standard charger for smartphones
(5V, Micro 5pin).
• You may additionally purchase smart pen,
smart dice, other accessories.
6.Product Specification5. Name of each parts
8. How to turn on/off power
Move the power button in the rear side to
turn the power on/off.
9. How to charge product
• Connect the smartphone charger
(5V, Micro 5Pin Standard charger) you possess
to the charging socket in the rear side of the
robot body.
• The battery is fully charged when the red charging
signal lamp in the front of the robot body turns off.
• Please make sure to use Albert after charging
when Albert’s battery warning light (red color)
flickers.
Size
Weight
Eye LED
Sensors
Driving gear
Speaker
Communication
Charge Voltage
Opetating time
Main body
Accessories and Cradle
Instruction manual
Power button
USB Charging socket
Wheel Drive
Ball Castor
Accessory mounting
• Do not leave the device in high temperature
or direct sun light.
• Do not let young children or pets to bite or
swallow the product.
• Do not apply physical impact on the product.
• The device may be unavailable for use or have
problems in operation when severe physical
impact is applied to the product. Also, severe shock
may cause the product to be separated or broken.
• Do not convert or separate the product arbitrarily.
• Please make sure to use the A/S center for repair.
Warranty is unavailable when the user arbitrarily
converts, separates, repairs the product.
• Do not use the product in places where smart phone
usage is prohibited. It may cause problems in
electromagnetic signals or result in hazardous
situations.
• Please make sure to turn the power off in
danger zones.
• Please make sure to abide the regulations,
instructions, signals within danger zone.
- Installation precautions
• Please proceed with the install after checking
the recommended device models.
• The App may not function if the device is not a
recommended model
Eye LED
Phone Cradle(Top)
Touch Sensor
Phone Bottom Cradle mounting
Charge/Battery remain indicator lamp
Proximity Sensor
Illuminance Sensor
Bluetooth indicator lamp
UO Albert
Widen the nose part and the bottom cradle mounting
and place the mobile phone in between as shown above.
Some mobile phone sizes are not
compatible,so please do not mount
the phone by force. (Handle with care)
It may fall forward when mounting phone
with heavy weight. Please be careful.
OID Sensor
3. Precautions
- Handling precautions
• Do not soak the device with water, and do not
touch the robot power plug with wet hands.