Document for FCC Certification And USERS MANUAL SK Telecom Co., Ltd.
• • • • • • • • Overview – Purpose This document describes the technology that places Mobile RFID Reader Chip on the microSD card (hereinafter referred to as “RFID on microSD Card”) to complement weaknesses and maximize strengths of the conventional RFID technology, with the aim of making the commercial sample to expand the RFID market.
Product Spec [Table 2-1] Development Specification Item Specification Frequency 917.10~926.90MHz Standard ISO 18000-6C / EPCglobal Class1 Gen2 Tag reading range 2.5~4.5cm Power output 13.7dBm Power consumption Tx Max(20dBm) 350mA Internal configuration Size Transmission speed Modulation SD Controller, RFID(PR9200) microSD Card 40~160Kbps DSB-ASK, PR-ASK Note Domestic microSD external antenna Conducted RFID <70mA ,SD <30mA, Power <250mA (15mm X 25mm , 0.
Phone Application-1 RFID on microSD RFID on microSD & Phone Phone SD-Card Slot
Phone Application-2 RFID on microSD & Phone
Phone Application-3 RFID on microSD & Phone Set up completion at the phone
Tag Read Test App Initial Screen • • • • Tag Read Start Tag Read Stop Application done Initial Screen : Once application on, the Initial Screen( RFID Chip Power Off condition to On condition). Tag Read Start : Click the “Read” button , once RFID on , Resd Tag data display on the screen. Tag Read Stop : Once click the “Stop” button, stop the Tag Reading.
Application-1(Alcohol Authenticity) 2 1 3 [Alcohol Authenticity Application] 1. Start the Alchohol Authenticity Application 2. Click the “Search” button, approach the Alcohol to micro SD Card on mobile phone. 3. Till vibrating the tag(Tag reading completion), Scan the product, The Tag Data reading only EPC Code. 4 4. Tag reading completed, search the Tag Data with the server..
Application-2(Alcohol Authenticity) 5 7 6 8 [Alcohol Authenticity Application] 5. Product search : Click the “Alcohol Authenticity” button. 6. Reading the Tag : EPC Data and reading data 7. Pass word of product Authenticity is right one, the server record the Authenticity. 8. If it is Authenticity, the screen display its authenticity.
• FCC Information • Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
