MK15 User Manual V1.1 MK15 MINI HANDHELD GROUND STATION USER MANUAL V1.
MK15 User Manual V1.1 Thank you for purchasing SIYI Technology’s product. MK15 is a 15-kilometer range Android smart controller with dual 1080p FPV, based on the full high-definition image transmission technology, which is completely and independently developed by SIYI Technology. The system is deeply optimized and integrated with Qualcomm 8-core CPU platform.
MK15 User Manual V1.1 SIYI User Group - Facebook SIYI YouTube Channel (https://www.youtube.com/channel/UC0vdyQDSRr3fiCffNKnYimA) SIYI Official AliExpress Store (https://www.aliexpress.com/store/911142095?spm=a2g0o.sto re_home.1000001.11.
MK15 User Manual V1.1 CONTENT READ TIPS .................................................................................................................................................................1 Icons.........................................................................................................................................................................1 Safety .............................................................................................................................
MK15 User Manual V1.1 3.1.1 End Point .................................................................................................................................................31 3.1.2 Middle Point ............................................................................................................................................32 3.1.3 Channel Reverse ...................................................................................................................................33 3.1.
MK15 User Manual V1.1 6 IMAGE TRANSMISSION ....................................................................................................................................65 6.1 Using SIYI IP Cameras ................................................................................................................................65 6.2 Using Third-Party IP Cameras / Pods ........................................................................................................65 6.
MK15 User Manual V1.1 READ TIPS Icons Please pay more attention to content indicated with the following marks: DANGER Dangerous manipulation probably leads to human injuries. WARNING Warnings on manipulation possibly leads to human injuries. CAUTION Cautions on what manipulation may lead to property loss.
MK15 User Manual V1.1 Do not use any SIYI radio system to operate your aircraft/vehicle/model at places with intensive crowd (a square, a park), or at places with many obstructions (a street, a parking lot), or in fields with strong magnetic or interference (an electricity plant, a radar station, railways), or in any other fields where an irregular flight/operation may cause property loss or human injuries.
MK15 User Manual V1.1 When you start your aircraft/vehicle for the first time, make sure that the fail-safe settings in your transmitter is activated. Always switch on the transmitter first and hold the throttle joystick at its bottom position, then power on your aircraft/vehicle/model. Battery MK15 transmitter is equipped with a built-in and chargeable 10200mAh Li-on battery and a 20W PD fast charger. Please do read the precautions before using and charging MK15 battery.
MK15 User Manual V1.1 Do not disassemble, bend, press, abandon or damage memory card by any means. Stop using the memory card if you find it soaked by water, oil or any other chemical liquid. CAUTION A memory card is also an electronic product, keep it away from static electricity. Keep the memory card slot clean in case of blocking by sand or dirt. Keep the memory card in slot while you are downloading or uploading data; taking out it mistakenly, hitting it or shattering it may cause damage or data loss.
MK15 User Manual V1.1 LTE TDD: B34/B38/B39/B40/B41 EVDO/CDMA: BC0 CAUTION MK15 4G function is not certified. Please refer to your local radio laws or wireless regulations before activating 4G network. Storage/Carrying/Recycling When your SIYI radio system is stand idle, or you are bringing it outdoors, or the system reached service life, then please do read the precautions below. CAUTION Always place your MK15 transmitter at places where babies or kids do not reach.
MK15 User Manual V1.1 1 INTRODUCTION 1.1 Product Features 15KM 1080P Image Transmission Once again SIYI made a breakthrough, applying this brand new and cutting edge high-definition image transmission technology on MK15 successfully. The technology comes with a smart ability to adapt its transmission to better frequency bands, which means it always goes to work on the band with least interference. With the standard omni directional antennas, MK15 system’s effective range can reach up to 15 kilometers.
MK15 User Manual V1.1 thermal imaging camera through one link. *The 180ms latency is an average result measured by using SIYI standard IP camera under the following conditions: H.265 format, 720p @ 30 fps, displayed in QGC v4.1 (low-latency mode): end-to-end latency is between 130 and 180ms. H.265 format, 1080p @ 30 fps, displayed in QGC v4.1 (low-latency mode): end-to-end latency is between 180 and 250ms.
MK15 User Manual V1.1 Multiple Wireless Features Wireless Binding Coming soon OTA Receiver Upgrade Super Long Battery Life, 30W PD Fast Charging With high-capacity built-in li-on batteries with great performance, MK15 transmitter’s battery life is up to 12 hours. The batteries’ stable and efficient discharging curve secures the system when running in high speed. *MK15 transmitter supports max 30W PD fast charging, which can charge 95% battery level in three hours.
MK15 User Manual V1.1 1.2 Parts 1.2.
MK15 User Manual V1.
MK15 User Manual V1.1 1.2.2 Button/Switch Types and Default Channel Definitions MK15 transmitter owes 13 physical channels and 16 communicational channels in total. Communicational channel 10 to 14 are mapped with PWM 1 to 5 in default. Channel No.
MK15 User Manual V1.1 1.2.
MK15 User Manual V1.
MK15 User Manual V1.1 1.2.4 Ports on MK15 Receiver 1.3 Technical Specification Overall Max Transmission Distance AG Control Range 15 km (Unobstructed, free of interference) 3.
MK15 User Manual V1.1 Channels 13 physical, 16 communicational PIX / APM Boying Paladin V2 JIYI K3A Pro / K++ VKFLY V7-AG QGroundControl MissionPlanner JIYI IFLY / Agri-Assistant Boying Agriculture VKFLY V7 Pro Datalink Supported FC Videolink Supported GCS (Standard RTSP video stream) Transmitter (Ground Unit) Monitor 5.5-inch High Definition and High Brightness LCD Touchscreen System Android 9.
MK15 User Manual V1.1 Receiver (Air Unit) Signal Output Interface & Ports 16 channels of SBUS 5 channels of PWM S.BUS: 3-Pin Datalink (to FC): UART 4-Pin PWM Channel 1-5: 6-Pin Video Input: 8-Pin Firmware Upgrade: Type-C Dimension (Antenna Excluded) Weight (Antenna Excluded) 70 x 55 x 16 mm 100 g Antenna Gain 5 dBi Power Input 25.2 ~ 58.
MK15 User Manual V1.1 1.
MK15 User Manual V1.1 1 x Carrying Box Mark The difference between MK15 agriculture version and enterprise version are: 1. MK15 agriculture transmitter has no HDMI output. 2. MK15 agriculture receiver supports SIYI cameras only. It does not support a third-party IP camera or an HDMI camera. 3.
MK15 User Manual V1.1 1.
MK15 User Manual V1.1 Mark Diagram ① means that MK15 receiver connects to only one IP camera or pod. You can use SIYI IP67 Camera (with searchlights), SIYI IP Camera, or Third-party IP Cameras / Pods. This diagram works when you purchase MK15 AG FPV Combo, or you purchase other MK15 combo to work with your available IP cameras / pod. Diagram ② means that MK15 receiver connects to two IP cameras or pods through an FPV hub.
MK15 User Manual V1.1 1.
MK15 User Manual V1.1 Mark MK15 Dual Remote Combo supports connecting two MK15 transmitters to one MK15 receiver. The two transmitters can be assigned as transmitter A and B to work together in Dual Remote mode and RC Relay mode. ⚫ Dual Remote: One transmitter controls motor (drone flight), the other transmitter controls the payload (gimbal or servo).
MK15 User Manual V1.1 1.7.1 Transmitter Indicator Solid Red: No communication between transmitter and receiver. Fast Red Blinks: Transmitter is binding to receiver. Slow Red Blinks: Firmware does not match. Triple Red Blinks: Image transmission initialization failed. Four-time Red Blinks: Transmitter requires calibration. Red-Green-Red-Green-Red Blinks: Unexpected power off of MK15 Android system. Slow Yellow Blinks: Transmitter power voltage abnormal.
MK15 User Manual V1.1 Green-Red Blinks: Receiver high-temperature alert, level three. Slow Red-Green-Yellow Blinks: Image transmission is starting. 1.7.2 Receiver Indicator Solid Red: No communication between transmitter and receiver. Fast Red Blinks: Transmitter is binding to receiver. Slow Red Blinks: Firmware does not match. Triple Red Blinks: Image transmission initialization failed. Yellow Blinks: Low voltage alert (voltage input from PMU is lower than 12V).
MK15 User Manual V1.1 2 GET READY TO USE MK15 2.1 Transmitter 2.1.1 Power On/Off Power On: Short press and long press combo. When MK15 transmitter is off power, press the power button once, battery level indicators light on. Then immediately press and hold the power button for about two seconds, battery indictors will light on again but one by one this time. Transmitter is powered on. Power Off: Long press.
MK15 User Manual V1.1 Screen Off: When MK15 transmitter is working, press the power button once, transmitter monitor will be off for saving battery power. 2.1.2 Charging You can charge MK15 transmitter only when it is powered off and using the original PD fast charger. Steps 1. Connect MK15 transmitter to the PD charger and plug it into power supply. 2. The charging indicator lights on red, transmitter starts being charging. 3. When the charging indicator turns to green, charging is finished.
MK15 User Manual V1.1 2.2 How to Place MK15 Antennas Both MK15 transmitter and MK15 receiver are using SMA male connector for fixing antenna. Please make sure that the connectors are screwed tight in case of any influence to transmission quality and range. 2.2.1 How to Place Transmitter Antenna As shown in the photo below, transmitter antenna should be placed vertically from the monitor and the head points upward, and its flat side should always point to your aircraft or vehicle.
MK15 User Manual V1.1 2.2.2 How to Place Receiver Antenna As shown in the photo below, receiver antenna should be placed vertically from the carbon fiber board or the arms and the head points downward, and its flat side should always point to your transmitter.
MK15 User Manual V1.1 CAUTION The two receiver antennas can point upward on a plane. On multi-rotors, antenna must point downward. Antenna feeder wires should be placed away from devices with much current and heavy interference, such as ESC and motors. Length of the antenna feeder wire is 300 mm. The wire should not be overlapped or tied. Antenna SMA connector should avoid touching with the metal or carbon fiber structural parts.
MK15 User Manual V1.1 3 SIYI TX APP Users can configure MK15 transmitter in the pre-installed application “SIYI TX”.
MK15 User Manual V1.1 Mark This chapter was made according to “SIYI TX” v1.1.197. 3.1 Channels Channel settings of End Point, Middle Point, Channel Reverse, and Channel Mapping. 3.1.1 End Point MK15 transmitter’s default End Point range is between -100 and 100.
MK15 User Manual V1.1 Select a target channel and input your required maximum or minimum channel value. It’s done. 3.1.2 Middle Point The default Middle Point value is “0”. Select a target channel and input your required middle point value. It’s done.
MK15 User Manual V1.1 3.1.3 Channel Reverse Channel Reverse is to reverse a channel’s output direction. Select a target channel. Then touch the “Normal” or “Reversed” button. It’s done. 3.1.4 Channel Mapping MK15 transmitter has 13 physical channels and 16 communicational channels. Users are allowed to define or map the physical channels (buttons, switches, joysticks) to communicational channels freely.
MK15 User Manual V1.1 Select a target channel. Then touch a mapped button/switch/joystick, it will pop up a list of all physical channels. Select the button/switch/joystick you want to re-map to. It’s done. 3.2 Datalink In Datalink Settings you can check the device ID, switch datalink connection and flight controller type, and configure customized baud rate. About Datalink Settings Device ID: Display the device ID of the integrated Bluetooth module in MK15 transmitter.
MK15 User Manual V1.1 3.2.1 Connection Available datalink connection types are: UART, USB COM, Bluetooth, and Upgrade Port. About Datalink Connection UART: Telemetry data goes through the built-in Android UART port. *Only for specific GCS, such as BOYING, JIYI, and VKFLY. *Developers can acquire SDK from SIYI to use the port for their GCS. USB COM: Telemetry data goes through the built-in CP2102 port. *For QGroundControl. Bluetooth: Telemetry data goes through the built-in Bluetooth connection.
MK15 User Manual V1.1 3.2.2 Flight Controller Select your required flight controller type for datalink connection in the provided list of all supported flight controller models. Currently supported flight controller models are: JIYI (K3A or K++), BOYING (Paladin), PIX, VKFLY (V7AG), and Customized flight controllers. Mark Please make sure that MK15 transmitter and received are bound before switching flight controller type. 3.2.
MK15 User Manual V1.1 Mark Please make sure that MK15 transmitter and received are bound before configuring baud rate, otherwise it would fail. 3.3 System In “System Settings” page, you can bind transmitter with receiver, turn on or turn off frequency self-adapting function, switch throttle type, and check production date.
MK15 User Manual V1.1 Bind: Check current binding status or start binding on transmitter. Adapt Frequency.: Search and switch to the frequency band with lowest interference automatically. Throttle: Switch throttle types among Mode 1, Mode 2, Mode 3, and Custom. Production Date: Not implemented yet. 3.3.1 Bind Please follow the steps below to bind MK15 transmitter with MK15 receiver. 1. In “SIYI TX” application, go to “System” page, then touch “Bind - Start”. 2.
MK15 User Manual V1.1 After turning on the function in “SIYI TX”, please restart MK15 transmitter, otherwise it won’t work. The function is not implemented at this moment. 3.3.3 Throttle Type Switch throttle joystick type. Available types are Mode 1, Mode 2, Mode 3, and Custom. 3.3.4 Production Date Displays the production finished date of your MK15 transmitter. 3.
MK15 User Manual V1.1 link’s real-time status in numbers and percentage. About Link Status Loss Rate: Loss percentage of data package which failed to be received by MK15 transmitter per second. Received Pack: Quantity of data package which are successfully received by MK15 transmitter per second. Received Rate: Received percentage of data package which are successfully received by MK15 transmitter per second. Upload: Data uploaded to MK15 receiver per second by bit.
MK15 User Manual V1.1 Failsafe function is to avoid model crash by keeping receiver outputting the preconfigured channel value when the receiver lost communication with transmitter. Please follow the steps below to configure your MK15 system with Failsafe function. 1. Make sure that MK15 transmitter is bound to receiver. 2. Go to “Failsafe” page.
MK15 User Manual V1.1 3. Failsafe function is not activated in default. The numbers on left represent channels. Channels display “Hold” when no channel value was input. 4. If you require a specific value in the channel, please turn on Failsafe switch first and turn the “Hold” button to “Custom”. Then input your required channel value. 5. After configuration, the channel would output the value if receiver lost communication to transmitter.
MK15 User Manual V1.1 3.6 Buttons / Dials MK15 transmitter supports changing the way that the buttons and the dials work by software. 3.6.1 Buttons The function changes the way that the four buttons (A, B, C, D) on MK15 transmitter works. About Buttons Lock (Self-Locking): After pressing, the button will bounce back but the channel will keep outputting 100. Press the button again to reset channel output to 0. Reset (Self-Reset): Press and hold the button, the channel will output 100.
MK15 User Manual V1.1 Press and hold the button, which means the channel outputs 100, LED under the button will light on. If the button is under “Self-Locking” status, the LED will be on still until the next pressing. 3.6.2 Dials The function changes the way that the two dials (LD, RD) on MK15 transmitter works.
MK15 User Manual V1.1 3.7 Joystick Calibration Joystick calibration function help users calibrate both joysticks’ middle positions and maximum/minimum positions. Regular calibration helps maintain control accuracy of the joysticks. Steps 1. Before calibrating the joysticks, please make sure that both joysticks are naturally standstill, not displaced by any force. 2. In “Joystick Calibration” page, touch “Start”, the page shows as below.
MK15 User Manual V1.1 3. According to the tips, if joystick coordinates are not “(0, 0)” when both joysticks are standstill, it shows that joystick middle points are displaced. Please touch “next” and do not touch joysticks. 4. Calibration of joystick middle points are finished. The next step is to calibrate joystick maximum and minimum positions. Please follow the tips again to push each joystick to its maximum/minimum positions on all four dimensions.
MK15 User Manual V1.1 Left: -100, 0 Right: 100, 0 Then touch “Finish”. 5. The Joystick Calibration page will turn to its initial page. Joystick calibration is finished. Mark If the joysticks do not stay in middle (coordinates are not (0, 0)) or do not output maximum/minimum value (-100 or 100), you shall calibrate them immediately. 3.8 Dial Calibration Dial calibration function help users calibrate both dials’ middle positions and maximum/minimum positions.
MK15 User Manual V1.1 Steps 1. Before calibrating the dials, please make sure that both dials are naturally standstill, not displaced by any force. 2. In “Dial Calibration” page, touch “Start”, the page shows as below. 3. According to the tips, if dials’ coordinates are not “(0, 0)” when both dials are standstill, it means that dial middle points are displaced. Please touch “next” and do not touch the dials.
MK15 User Manual V1.1 4. Calibration of dial middle points is finished. The next step is to calibrate dial maximum and minimum positions. Please follow the tips again and push each dial to its maximum and minimum position. Then touch “Finish”. 5. Dial Calibration page will return to its initial page. Dial calibration is finished.
MK15 User Manual V1.1 Mark If the dials do not stay in middle (coordinates are not 0) or do not output maximum/minimum value (-100 or 100), you shall calibrate them immediately. 3.9 Multiple Links The Multiple Links feature only comes with MK15 Dual Remote Combo, which includes details of its two main function “RC Relay” and “Dual RC”.
MK15 User Manual V1.1 About Multiple Links Function Type: Switch the function between “RC Relay” and “Dual RC” and switching between “TX-A” and “TX-B” at the same time. Bind (Frequency): Bind “TX-A” and “TX-B” with the receiver in turns after configuring function type. Control Switch (Key Function): Define a button or a switch to take over the control in “RC Relay” mode, or to switch control of certain channels between “TX-A” and “TX-B” in “Dual RC” mode.
MK15 User Manual V1.1 3. Bind “TX-A” and “TX-B” with the receiver in turns. 4. In “Control Switch” page, assign a switch/button/dial to switch control to the receiver from “TX-A” to “TX-B”. 5. RC Relay settings are finished. 3.6.2 Dual RC Dual RC function is developed for certain enterprise applications.
MK15 User Manual V1.1 motors, and the other transmitter can be assigned to control payloads/gimbal/servos. Steps 1. Prepare a MK15 Dual Remote Combo. 2. Go to “Multiple Links – Function Type”, assign the two transmitters as “Dual RC TX-A” and “Dual RC TX-B”. 3. Bind “TX-A” and “TX-B” with the receiver in turns. 4. In “Control Switch” page, assign a switch/button/dial to switch control to the receiver from “TX-A” to “TX-B”.
MK15 User Manual V1.1 5. In “Control Channels” page, configure channel mappings for “TX-A”, then assign the decided channels to “TX-B”. So, when the Dual RC function is enabled, “TXA” can authorize to “TX-B” or withdraw from “TX-B” the control of the assigned channels. 6. Dual RC settings are finished. Mark Dual RC function works similar to Wireless Coach function. So, MK15 Dual Remote Combo can be used for drone training and education.
MK15 User Manual V1.1 4 DATALINKS Datalink is one of the core features of most SIYI radio systems. MK15 transmitter supports communication with different ground control software through various hardware interface. 4.1 Communication with GCS through USB COM (Serial) Let’s take QGroundControl as an example. 1. In “SIYI TX” app, go to “Datalink”, and choose “USB COM” in “Connection”. 2.
MK15 User Manual V1.1 4. Name the connection as “Serial”, set the type as “Serial” and the baud rate as “57600”, then touch “OK” to return to the Comm Links page. 5. Touch the configured “Serial” connection and touch “Connect”, USB COM (Serial) connection is finished. Mark MK15 supports different baud rates. This guide uses common baud rate “57600” for your reference.
MK15 User Manual V1.1 If it is your first time adding a new connection in QGC, please do not check the option “Automatically Connect on Start”. It can be checked later when you confirm that the datalink is connected successfully. 4.2 Communication with GCS via Bluetooth Let’s take QGroundControl as an example. 1. In “SIYI TX” app, go to “Datalink”, and choose “Bluetooth” in “Connection”. 2.
MK15 User Manual V1.1 5. Touch the Bluetooth device of which the name is starting with “SIYI-XXXXXXX”, then touch “OK” to go back to the Comm Links page. 6. Touch the configured “Bluetooth” connection and touch “Connect”, Bluetooth connection is finished. Mark Step 1 and 2 have been finished before delivery.
MK15 User Manual V1.1 If it is your first time adding a new connection in QGC, please do not check the option “Automatically Connect on Start”. It can be checked later when you confirm that the datalink is connected successfully. 4.3 Communication with GCS through UDP Let’s take QGroundControl as an example. 1. In “SIYI TX” app, go to “Datalink”, and choose “UDP” in “Connection”. 2. Go to “Application Settings” in QGC, touch “Comm Links” and “Add” a new connection. 3.
MK15 User Manual V1.1 4. Touch the configured “UDP” connection and touch “Connect”, UDP connection is finished. Mark UDP connection has not been updated to mass production. If you would like to try the connection, please contact SIYI Support directly. If it is your first time adding a new connection in QGC, please do not check the option “Automatically Connect on Start”. It can be checked later when you confirm that the datalink is connected successfully. 4.
MK15 User Manual V1.1 3. In “SIYI TX” app, go to “Status” page to check connection status between MK15 transmitter and MK15 receiver. When connection is normal, data “download” is not 0. If it is “0”, please go back to check step 1 and 2. 4. Then go to “Datalink” page and check: ⚫ If “Connection” port is correct? ⚫ If “Flight Controller” model is correct? ⚫ If “Baud Rate” is correct when you use customized flight controller. 5. In your GCS, check if “Datalink” port is correct.
MK15 User Manual V1.1 5 SIYI FPV APP SIYI FPV is an Android application developed by SIYI Technology and for configuring image transmission, displaying video stream, and monitoring link status on SIYI smart controllers, remote controllers, and FPV modules. 5.1 Settings In the “Settings” page, you can switch Decoding Type, configure IP Addresses, and enable Cross Sight. About Settings Decoding Type: Switch between “Hardware Decoding” and “Software Decoding”.
MK15 User Manual V1.1 A and B. The “Rotate” buttons after the addresses can rotate the image in 180 degrees. Cross Sight: Display a cross sight in the center of the image. 5.2 Link Status Display the link status directly over the FPV image. Mark For details of Link Status, welcome to refer to Chapter 3.4 in this manual. 5.3 About SIYI FPV Displays the software version of SIYI FPV and common contact information of SIYI Technology.
MK15 User Manual V1.
MK15 User Manual V1.1 6 IMAGE TRANSMISSION MK15 receiver supports maximum 1080p @ 60 fps and average 180ms low-latency HD image transmission. It connects to most IP cameras and pods on market and can connect to HDMI cameras/pods through an HDMI converter. Please refer to the diagram in Chapter 1.5 of this manual to connect your SIYI IP Camera, Third-Party IP Camera/Pod, or HDMI Camera/Pod with MK15 receiver. Then follow the steps below to acquire image transmission display. 6.
MK15 User Manual V1.1 Let’s take QGroundControl as an example. 1. In camera settings, check and copy the RTSP address of your IP camera/pod. 2. In QGC, go to “General” page and slide to “Video Settings”. 3. Configure “Source” as “RTSP Video Stream”. Then input the copied RTSP address of your IP camera/pd after “RTSP URL”. 4. Go back to QGC home page to check image display. 6.
MK15 User Manual V1.1 6.4 Dual Video Stream Connection After connecting the FPV Hub to MK15 receiver, dual video stream will work in many ways. 6.4.1 Dual SIYI IP Cameras The two SIYI IP Cameras coming with MK15 Agriculture Dual FPV Combo are default to be Camera A and Camera B assigned with different IP addresses “192.168.144.25” and “192.168.144.26”.
MK15 User Manual V1.1 the FPV Hub. Then open SIYI FPV app, input the IP addresses in the bar and you will see two video streams. 6.4.3 SIYI HDMI Converter and SIYI IP Camera The HDMI converter coming with MK15 Enterprise HDMI Combo or sold alone is default to be HDMI Converter A, of which the IP address is “192.168.144.30”. This IP has no conflict to either Camera A or Camera B.
MK15 User Manual V1.1 you get the HDMI Converter B. Then, after connecting the two HDMI modules with different IP to the FPV Hub and open SIYI FPV app, you can see dual video stream when the correct RTSP addresses are input in the IP address bars. Mark Dual video stream does not work when the two streams use the same IP address. For more details about the IP addresses of the MK15 parts, please refer to the chapter 6.5 in this manual. 6.5 Common IP Addresses MK15 Receiver IP Address: 192.168.144.
MK15 User Manual V1.1 SIYI HDMI Converter A’s RTSP Address: rtsp://192.168.144.30:554/live/0 SIYI HDMI Converter B’s RTSP Address: rtsp://192.168.144.31:554/live/0 Common Video Player: SIYI FPV, QGroundControl, EasyPlayer Video Display URL: Please refer to the address given in camera settings. Cameras from different manufacturers come with different URL. Network Diagnosis Tool: Ping Tools 6.
MK15 User Manual V1.1 Mark If you have done investigation by following all steps above, but the reason is still not located, please contact your dealer or SIYI immediately. 6.7 Output Transmitter Image Display to Other Device There are two ways to output MK15 transmitter image display to other devices. 6.7.1 Through Transmitter HDMI Port Let’s take an example of outputting image to an HDMI monitor.
MK15 User Manual V1.1 Mark MK15 Agriculture Transmitter does not support this function. 6.7.2 Through WiFi Hotspot Let’s take an example of outputting image to a Windows laptop, running QGroundControl. 1. Go to MK15 transmitter’s Android system settings. 2. Then tap on “Network & Internet – Hotspot & Tethering – Wi-Fi Hotspot”. 3. Enable “Wi-Fi Hotspot”, configure the hotspot name and its password. 4. Connect the laptop’s WiFi to the MK15 Android “Hotspot”. 5. Open QGroundControl GCS on the laptop.
MK15 User Manual V1.1 6. In “RTSP URL”, input the RTSP address of the camera or HDMI converter connected with MK15 receiver, then you will see the image from the camera or HDMI converter. Mark If the same video stream is displayed in the device connected to MK15 transmitter Wi-Fi hotspot and in MK15 transmitter at the same time, then the displayed image may delay because of bandwidth limit. If it happens, please disable either one of the video display.
MK15 User Manual V1.1 7 ANDROID OS 7.1 Download App Pre-installed applications in MK15 transmitter are: ⚫ SIYI TX ⚫ SIYI FPV ⚫ Ping Tools If you need to download above apps, please visit the MK15 pages on SIYI Official Site (www.siyi.biz) or SIYI Google Drive – MK15 (https://drive.google.com/drive/folders/1yFk_Wb039xnR1uEdDX4iIys6J1CoyCk4? usp=sharing). 7.2 Import and Install App 7.2.
MK15 User Manual V1.1 7.2.2 Through USB Drive Save files into your U disk and insert the card into the USB port on top of MK15 transmitter. Copy the files from your USB disk to MK15 system storage, then go to “Files” in Android system to find the files and install. CAUTION Please try to simplify your MK15 Android system as much as possible and avoid install apps which are not useful to the system, in case of any unexpected issues during flight.
MK15 User Manual V1.1 8 Firmware Upgrade MK15 transmitter and MK15 receiver support firmware upgrading through PC. Before upgrading, it is necessary to prepare the tools, software, and firmware below. ⚫ SIYI Assistant (PC Software) ⚫ MK15 Transmitter Firmware ⚫ MK15 Receiver Firmware Mark Above software and firmware can be downloaded from SIYI Official website or downloaded from SIYI MK15 Google Drive (https://drive.google.
MK15 User Manual V1.1 Above tools come with MK15 package. Fast charging cable and converter can be used to upgrade MK15 receiver firmware. Firmware Upgrade Steps 1. Install “SIYI Assistant” into your Windows system. 2. Use the upgrade cable to connector computer’s USB port to MK15 transmitter’s upgrade port. 3. Run “SIYI Assistant” and switch to “Upgrade” page to check the MK15 transmitter’s current firmware version. 4.
MK15 User Manual V1.1 9 After-sale Service If there were any questions or problems using SIYI Technology’s product, you can always try to send an email to SIYI Official A/S Center (support@siyi.biz) or consult your sales representative or dealer for answers or solutions. 9.1 Repair Service If your purchased SIYI products cannot work properly, please contact SIYI Official A/S Center for consulting. Usually there are two situations for acquiring repair service.
MK15 User Manual V1.1 9.2 Warranty SIYI Technology guarantees that, subject to the following conditions, Return & Refund Service, Replacement Service, and Warranty Repair Service can be requested. Please contact SIYI directly (support@siyi.biz or your sales manager) or authorized SIYI dealer for more detail. 9.2.
MK15 User Manual V1.1 Any fault or damage of the product is caused by unauthorized use or modification of the product, including exposure to moisture, entry of foreign bodies (water, oil, sand, etc.) or improper installation or operation. Product labels, serial numbers, waterproof marks, etc. show signs of tampering or alteration. Damage is caused to the product by uncontrollable external factors, including fire, floods, high winds, or lightning strikes.
MK15 User Manual V1.1 Within fifteen (15) calendar days of receiving the product if the product suffers performance failure. Replacement Service will not be provided where: Service is requested more than fifteen (15) calendars days after receiving a product. Legal proof-of-purchase, receipts, or invoices are not provided, or are reasonably believed to have been forged or tampered with.
MK15 User Manual V1.1 9.2.3 1-Year Warranty Repair You can request warranty repair service: If a product does not function as warranted during the warranty period, you may obtain after-sales service by contacting SIYI’s service center. You will need to provide a valid proof-of-purchase, receipt, or order number for the warranty service. Charges may apply for services not covered by this Limited Warranty. Please contact SIYI for information specific to your location.
MK15 User Manual V1.1 Damage caused by unauthorized modification of circuits and mismatch or misuse of the battery and charger. Damage caused by operation in bad weather (i.e., strong winds, rain, sand/dust storms, etc.) Damage caused by operating the product in an environment with electromagnetic interference (i.e., in mining areas or close to radio transmission towers, high-voltage wires, substations, etc.
MK15 User Manual V1.1 10 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
MK15 User Manual V1.1 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
MK15 User Manual V1.1 SIYI Technology (Shenzhen) Co., Ltd Business Inquiry: info@siyi.
MK15 User Manual V1.1 AS Center: support@siyi.
