USER MANUAL HDWIFICam Pro This manual describes how to use this WIFI camera and install the supplied software. Be sure that you have read and understood its contents before using the camera.
To get started, you need: 1. A wireless network (only support 2.4G) ***Use numbers and letters in creating network name and password.** 2. A smart device, such as an Android Smart Phone or Tablet (Android version 6.0 or latest) or an iPhone, iPad, or iPod Touch (IOS version 8.0 or latest). APP Download: HDWIFICam Pro QR Code Download the App “HDWIFICam Pro” from Google Play Store (for Android) or Apple Store (for iOS). Or scan the QR code to download the APP.
Three ways to add and use camera ① ② ③ IP mode setting for new device Add an Online device (IP Mode) AP mode setting for new device ***AP mode for point to point , the camera can not be view remotely . the phone need to be close to the camera to be able to view the live videos.
Way ① IP Mode Setting ***Camera configured** Before setting, connecting the device with power supply and turn it on. Open the “HDWIFICam Pro” App , Click + to add a new device ,when using the camera for the first time please select the first way .
Go to “ Setting” on your device .
***If your Android system phone show you that “the current WLAN network cannot access the internet , Switch to another network ?” Just ignore it.** After connecting with the UID , you need select your home ’ s 2.4Ghz WI-FI signal and enter the correct password . Confirm the password and connect. Then click “done“.
The camera will reboot. It takes about 2-5 minutes, then the camera will show online.
If the camera show “disconnected “, click UID number to refresh the state . ***If the camera show “connection timeout”, That means Wi-Fi password is wrong . Please reset the camera ,and connect again.
Live Video Multiple screen Large/Samll view LAN search Add device Device list Local images Local & SD card videos Alarm event Menu setting 8
Upside/Down Left/Right Indicator Light ON/OFF Night Vision ON/OFF Resolution Rate Video Record Snapshot Voice intercom Speaker More 9
Way ② Add an online device ***Camera configured** The camera must be already connected to a network (IP Mode). Open the “HDWIFICam Pro” App , Click + to add a new online device or Input the UID number ( you also can scan the camera QR Code to get the UID number ), then input new password if changed.
password is 6666. ***If you forgot your new password , you could reset the device and set the IP Mode again.
Way ③ AP mode setting ***Camera configured** Before setting, connecting the device with power supply and turn it on. Open the “HDWIFICam Pro” App , Click + to add a new camera .
Go to “ Setting” on your device .
After connecting the device ’ s hotspot Wi-Fi , it will be added automatically . And you could view the live videos now . If the camera show “disconnected “, click UID number to refresh the state . ***AP mode for point to point , the camera can not be view remotely .
FREQUENTLY ASKED QUESTIONS What Micro SD Card is required for recording? Why can’t I use my Micro SD Card for recording? The camera supports up to 128 GB Micro SD card. Please use High Speed Class 10 FAT formatted memory card. You must format the Micro SD before using. If SD card is not recognized when inserted into camera, just remove and re-insert. Why can’t the camera go online? 1. Powerless. 2. Check if your router is working properly or not. 3. Weak Wi-Fi signal. 4.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.