Decline. » STOAT SIT La Precis spa Ry : 00 Electronics Research and Development Irate i 2RI05/06 Page : lof 7 Title : GT-Fire Manual Configuration Procedure Written by A:Veronese Verified by G. Pirovano Approved by A.
SIT La Precis spa porno.
SIT La Precis spa Dec nes © STOUT . Rev, : uit Electronics Research and Development te OSI Page : dof 7 3 Abstract purpose This document describe the manual procedure to change the configuration of the remote control LG-Hre. The configuration are: 1. 0384021 Gr 2. (0584022 GTM 3. 0584023 MTGE 4 Procedure 4.1 Configuration mode The remote control must be set in configuration mode applying the power supply (placing the batteries) and pressing in the same time the kev BANJO.
SIT La Precis spa Dot one © ST06117 Electronics Research and Development po : 310 i Page : Sef 7 4.2 Be rolling the sanction Using the key mote we scroll the 4 deficient features of the remote control, RR 4.3 Features activation Using the key UP we activate the option using the key DOWN we dis activate the: mention. China option is activated the icon is present. Flare control deactivated The contents of this document ts property of SIT La Precis that reserves to itself all the vi his sanctioned by laws.
SIT La Precis spa ; ITH Notworks Researcher Development Doc.no, © STOAT Rev : 0 Dare LBs Page : Gof 7 4.4 Setup for GT version 0584021 Ne option must be activated 4.5 Setup for GTM version 0384012 Only the flame level option must be activated. 4.6 Setup For GIT MY version = 0584023 The options Ham level + fan + aux must be activated. 4.7 Exit from stop Remove the finger from the ON/OFF key.
SEE La Precis ap Detonate. SG ; L Nisan Rem sen Overdevelop ve in Figs iim E FCC ID Label: 1. Label shall be printed on an adhesive backed plastic media such as Tyler @ that will remain firmly attached In a temperature ranges of ~40° to 80°C. 2. Printing shall not show wear after two years of normal handling and usage. 3. Label shall be printed in Lack on a white background with a minimum font size of 10pt. 4. Label shall contain FCC identification number and compliance statement as shown below. 5.