User Manual

ManualsBrandsSISTEMATICA ManualsElectronicsRemote Controlled Outputs Actuator

SISTEMATICA S.p.A.

SISTEMATICA S.p.A.SISTEMATICA S.p.A.

SISTEMATICA S.p.A.

Rev.0

Rev.0Rev.0

Rev.0

Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715

http://www.sistematica.it e-mail: info@sistematica.it 06/03/2013

RTX NIMBLE PLUS

RADIO REMOTE CONTROL 2 COMMAND WITH BUTTONS

USER AND MAINTENANCE MANUAL

WARNINGS

This manual is an essential part of the device and it should be thoroughly kept for later consultation.

Carefully read the warnings contained in this manual, concerning safety and a proper preservation of the

product. These warnings are always to be carefully read before using the device. SISTEMATICA S.p.A.

declines all responsibility for any trouble arising from the non-compliance with these warnings.

• DO NOT TRAVEL WITH THE DEVICE SWITCHED ON

• CONNECT THE SYSTEM ONLY TO THE VEHICLE’S BATTERY

• BEFORE CARRYING OUT ANY MECHANICAL MAINTENANCE OPERATION (WELDING) ON THE

VEHICLE, DISCONNECT THE BATTERY CLIPS

• AVOID ATTEMPTING TO REPAIR THE DEVICE BY YOURSELF. REPAIRS PERFORMED BY

UNSKILLED PEOPLE CAN CAUSE SERIOUS DAMAGES OR FAILURES. FOR ASSISTANCE,

APPLY TO YOUR LOCAL AUTHORIZED SERVICE CENTRE. USE ONLY ORIGINAL SPARE PARTS

• ALWAYS KEEP AT A SAFE DISTANCE FROM THE MOVING PARTS

Summary of content (4 pages)

PAGE 1
RTX NIMBLE PLUS RADIO REMOTE CONTROL 2 COMMAND WITH BUTTONS USER AND MAINTENANCE MANUAL WARNINGS This manual is an essential part of the device and it should be thoroughly kept for later consultation. Carefully read the warnings contained in this manual, concerning safety and a proper preservation of the product. These warnings are always to be carefully read before using the device. SISTEMATICA S.p.A. declines all responsibility for any trouble arising from the non-compliance with these warnings.
PAGE 2
TECHNICAL FEATURES • • • • • • • • • • • • Number of outputs: 2; Frequency bands: ISM 868/915 MHz Microprocessor electronics control; Dimension: 190x83x22 (with antenna); Gradeo of enclosure: IP67; Protection of battery inversion polarity; 12/24 VDC (10-30 allowed) rating power supply through connection to the vehicle’s battery; Typical quiescent current:- 18 mA a 12 V; - 14 mA a 24 V; Interal resettable fuse: 7 A Maximum suppliable current for each channel: 5 A Maximum total suppliable current: 7 A Receiv
PAGE 3
POSITIONING OF THE RECEIVER UNIT, DIMENSION AND DRILLING TEMPLATE For a proper functioning, locate the receiver type NIMBLE with the cable output downwards, as shown in the picture below: The receiver is provided with an integrated antenna; be sure to locate it at sight, not inside any metal box or screened by ferrous masses (ex.
PAGE 4
PRODUCT IDENTIFYING LABELS NIMBLE: product model S/N: product derial number Cod.: product identification code POSITIONING ON THE RECEIVER OF THE IDENTIFICATION LABEL RECEIVER IDENTIFICATION LABEL Removal of the identifying labels entails lapsing of the guarantee conditions and the responsibility of SISTEMATICA S.p.A.