User Guide

ManualsBrandsSirius XM Radio ManualsElectronicsXM Satellite RX with FM Transmitter

In Your Home

• Use the home stand to access the

antenna, power, and audio cables

for best sound quality.

• Face your XM antenna south

through a window so you have at

least two bars of signal strength for

recording.

• If you need to place the antenna at a location more

than 25 feet away, XM offers an extension kit (model

XMAC1000) at www.xmradio.com (click “XM Store”).

On the Go

• Keep your MyFi receiver pointing

straight up when listening to live

programming.

• The belt clip is ideal for carrying

your MyFi, and listening to recorded

music. To wear your MyFi and

listen to live programming, we

recommend using the antenna

headset (model X2GLHP01)

available separately at www.xmradio.com.

Receiving the Best Signal

• Use the built-in signal strength meters for aiming the

MyFi internal antenna or external antennas. Press

“menu,” rotate the dial to “Antenna Aiming,” and

press the dial. You will see two rows of bars.

Move your MyFi or external antenna to a position that

gives you the highest number of bars on either meter.

In Your Vehicle

Using the 2go Button

• When you use the 2go feature for recording on the

go, ensure that you have at least two bars of signal

strength on the main screen. This will help prevent

accidental cancellation of your recording if there is a

fade in signal strength.

• To start you recording, press “2go.” Press it again to

confirm recording.

• To stop your recording, press “2go” again.

Scheduling a Recording Session

• You must have your MyFi in the home stand with

power adapter and an XM antenna connected.

• Be sure you have at least two bars of signal strength.

• To set up your scheduled recording time, go to “menu.”

Select “Schedule MY XM” and then Session 1 or 2.

IMPORTANT: Turn your MyFi off or it will not record

at the scheduled time. It will turn on automatically

to record.

• When you want to listen to your recordings, press

“mode” to switch to “MY XM.”

Questions

For more information, see your MyFi manuals or contact

XM Listener Care at 1.800.XM.RADIO (967.2346).

XM2go Hot Tips

portable

wireless

effortless

TO FM

ANT

TO XM

RADIO

TO FM

RADIO

Made in Malaysia

MyFi and related logos are trademarks of Delphi Corporation.

The XM name, XM2go, and related logos are registered trademarks of XM Satellite Radio Inc.

Built-in antenna

Because every vehicle is different, we can only provide

some general guidelines. If you need help, consult a

professional installer.

• Decide which method (cassette adapter, professional

wired FM, or self install via the XM SureConnect) is

best for your vehicle and location.

• Always do a trial run before installing anything

permanently. Temporarily connect all power, audio,

and antenna lines. Make sure that you receive the

XM signal and that you hear XM programming

through your vehicle’s audio system. You must have

your vehicle antenna plugged in to the cradle or the

XM SureConnect to receive the signal.

• In the rare situation when you can’t find a clear FM

frequency or you experience interference, we

recommend use of the optional Delphi FM Direct

adapter (model SA10112, available separately at

www.shopdelphi.com).

Helpful Tips to Enjoy Your MyFi™ XM2go