USER MANUAL T3DPS-FM FM 3CH DIGITAL PROPORTIONALR/C SYSTEM FOR MODEL AIRPLANES Made In China T 3DP -R adio F M 27 MHz.
For your safety using, please read this manual thoroughly.
For your safety using, please read this SYSTEM CONTENTS: manual thoroughly. Items Piece Unit Transmitter Receiver Servo Parts T3DPS-FM27 1 FM27-3CH 1 S-17(standard) Servo Horn 2 2 Servo Horn Retention Screw 2 4 Servo Retention Screws Check if you have the above items, otherwise, please contact your local distributor for assistance. 1. TRANSMITTER ANTENNA CH3 Use for controlling the speed of the motor of the model. BATTERY LEVEL INDICATOR Two LED display to indicate battery voltage level.
BATTERIES INSTALLATION * Remove battery cover at the back of transmitter. * Check carefully the polarity markings before inserting the 8 AA alkali or rechargeable battery(not provided). * Put back the battery cover. Battery Cover 2.RECEIVER OUTPUT CONNECTOR BATT. Connect battery(4.8~6V) CH.1 Connect a servo to control the direction of model. CH.2 Connect a servo to control the direction of model. CH.3 Connect to a speed controller or servo. Receiver FM27-3CH CH.3 X'TAL CH.2 CH.1 BATT.
ASSEMBLY 1.Servo/Receiver Installation Diagram Connect to a Speed Controller or servo Receiver FM27-3CH CH.3 X'TAL CH.2 CH.1 BATT. Power Supply (Input 4.8V-6V) 2.Servo Horn Installation * After connecting servo to receiver, turn on the power switch of the transmitter and receiver. * Ensure the trims on transmitter are at neutral position. * Install the servo horn according to drawing. 0 90 STORAGE * Store the R/C system in optimal conditions, keep away from extreme hot or cold conditions.
"Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment." NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.