Owner’s Manual i
About This Manual For Customers in the U.S. FCC Statement This device complies with 15 the FCC Rules. Operation is subject to the following two conditions: (i) This device may not cause harmful interference, and (ii) this device must accept any interference received, including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with limits for a Class B digital device. Pursuant to Part 15 of the FCC Rules.
with the liquid crystal inside the display. If any of the following events occur, take action as indicated. − If liquid crystal comes from in contact with your skin Wipe the area with a cloth and then wash thoroughly with running water and soap. − If liquid crystal gets into your eyes Flush the affected eye with clean water for at least 15 minutes and then seek medical assistance. − If liquid crystal is swallowed Flush your mouth thoroughly with water.
Table of Contents Getting to Know Your Camera…………………………………………………….. 1 Selecting Power Supply……………………………………………………………. 2 Installing Software…………………………………………………………………. 3 - StyleCam Deluxe Installer Menu - Installing ArcSoft PhotoImpression - Installing ArcSoft VideoImpression - Installing Adobe Acrobat Reader - Installing StyleCam Deluxe Driver - Connecting StyleCam Deluxe to Your PC Learning About the LCD Display………………………………………………..
Getting to Know Your Camera 1
Selecting Power Supply ______ The StyleCam Deluxe uses two (2) AA-size alkaline. Do not use rechargeable batteries. Using rechargeable batteries may damage the camera and will void warranty. Please read the important notes and battery information below before inserting batteries into your digital camera. Important Battery Information -- All images will be lost if the camera is not supported with enough battery power. -- Download all images as soon as possible to avoid losing or damaging the images.
LED light to flash once, at this point the camera should function normally. Installing Software __________________________________________________ The StyleCam Deluxe includes the following software and applications: StyleCam Deluxe TWAIN driver - to transfer pictures/video from the camera to the computer, ArcSoft PhotoImpression 3.0 – for photo editing, VideoImpression 1.6 - for video editing & capturing live video, and Adobe Acrobat Reader - to access the Owner’s Manual (PDF).
You have two options: Automatic Installation or Custom Installation. Please check one of the selections and click “Continue” located in the bottom right corner. Automatic Installation (Recommended) By default the “Automatic Installation” is checked. Click “Continue” to install the camera software. Note: the grayed-out item(s) are programs that are already installed on your computer, and you do not need to install them again. 1.
4. When the installation is completed, the computer will prompt you to reboot your system. Please choose “Reboot now” and click “Finish” to reboot your computer. Note: Please save your work and close all programs before rebooting your computer For Windows 98SE users ONLY: You may encounter an error message during installation due to old version of DirectX installed on the computer. Please select “Yes” and continue with installation.
Installing ArcSoft PhotoImpression Please follow the instruction below to install ArcSoft PhotoImpression. 1. Select the language you want to install from the drop down list. 2. On the welcome screen, click “Next” to continue setup. 3. On the license agreement screen, click “Yes” to accept license agreement to continue setup. 4. Chose the destination location of where you’d like to install the software and click “Next”. 5.
6. Click “Next” on the select program folder screen. 7. The setup progress bar will appear, please wait until the bar disappears to proceed. 8. Click “Finish” to complete setup. (For Windows 98se ONLY: You will be prompted to remove the CD from CD-ROM drive and reboot your computer. Please keep the CD inside the CD-ROM drive, select “Reboot later”, and continue installing the other applications before restarting your system.
2. Click “Yes” to accept the license agreement to continue setup. 3. Click “Next” on the choose destination location screen. 4. Click “Next” on the select program folder screen to continue setup. 5. A setup status bar will appear, please wait until the screen disappears to continue.
6. Click “Finish” to complete setup VideoImpression. (For Windows 98se ONLY: You will be prompted to remove the CD from the CD-ROM drive and reboot your computer. Please keep the CD inside the CD-ROM drive, select “Reboot Later”, and continue installing the other applications before restarting your system.) Installing Adobe Acrobat Reader Please follow the instructions below to install Adobe Acrobat Reader. The setup status bar will appear, please wait until the bar disappears to continue setup. 1.
2. Click “Next” on the destination folder. 3. Click “OK” to complete setup. (For Windows 98se ONLY: You will be prompted to remove the CD from the CD-ROM drive and to reboot your computer. Please keep the CD inside the CD-ROM drive, select “Reboot Later”, and continue installing the other applications before restarting your system.) Installing StyleCam Deluxe TWAIN Driver Please follow the instructions below to install the StyleCam Deluxe TWAIN driver.
3. You may run into a message from Microsoft that requires “Digital Signature” on the driver. It is safe to ignore this message, and click “Yes” to complete setup. 4. On the setup complete screen, select “Yes, I want to restart my computer” and click “Finish”. Note: Please save and close all running programs so that you do not lose any important document.
is now connected to your PC. 4. The computer will detect a new hardware device and prompt you to install the StyleCam Deluxe Drivers (Video & Still). 5. Follow the on screen instructions to complete installing the StyleCam Deluxe still image & video drivers. Note: You must keep the CD inside the CD-ROM drive during the first time that you connect your StyleCam Deluxe camera to your computer If you encounter a Digital Signature message from Microsoft, it is OK to ignore this message and click “Continue”.
When your StyleCam Deluxe is at full power, the battery indicator on the LCD display will be fully shown. When power is low, the icon will flash. This indicates that the batteries are weak and need to be replaced. Note: The StyleCam Deluxe allows one (1) minute to change the batteries without losing all the images saved on the camera. If possible, we recommend that you download all images to your computer before changing batteries.
Green LED - Sufficient light Red LED - Insufficient light 1. To turn on the flash, press the Flash button, and you will see the flash icon appear in the status LCD. 2. The flash icon will blink for 5 seconds, and then stabilize. 3. Once the icon stops blinking, the camera is ready to take a picture. 4. Follow the procedure described above to take a picture.
ALL images saved on your digital camera. Please follow the instructions below to erase the pictures. Deleting Single (LAST) image 1. Power on the StyleCam Deluxe by pressing Power/Mode button. 2. Select the resolution mode of the picture that you want to erase using the Power/Mode button. 3. To erase the LAST picture saved on that mode, press the DELETE button ONCE. 4. You will hear a single beep to confirm that the picture has been erased. 5.
Recording Movie with the Video & Audio Mode _____ You can record a movie clip up to 60 seconds in AVI format with your StyleCam Deluxe. The video mode has a resolution of 320×240. Please follow the instructions below to capture a video. 1. Power on your StyleCam Deluxe by pressing the Power/Mode button. 2. Press the Power/Mode button and scroll through the menu until the video icon & the audio icon appear together in the status LCD. 3.
Downloading Still Image & Video _____________ Once you’ve installed the StyleCam Deluxe TWAIN driver, you can download the images from your digital camera to your computer. Transfer Images & Video With the StyleCam Deluxe Camera Wizard You can use the StyleCam Deluxe Camera Wizard to transfer & save, view a slideshow of pictures, play your video, or open folders to view files. Connect the StyleCam Deluxe with the supplied USB cable to your PC; the following screen will appear.
shown in the above screen capture. To save these files to your desired location, click on “Browse”, select a location to save your files, and click OK. Your pictures and/or video will be saved under this location. You can also view your pictures in a slideshow. Chose “View slideshow of the images” from the StyleCam Deluxe Camera Wizard, and click OK. To play a video, select the video icon from the Camera Wizard, and click OK. Your video will now play in Windows Media Player.
1. Go to My Computer Æ My Camera 2. Your video(s) appear in this folder. 3. Right click on the video icon(s), and select “Copy”. 4. Go to the location you desire, right click on your mouse to bring up a menu, and select “Paste” to copy the video onto your desired location. Using the StyleCam Deluxe as PC-Camera with ArcSoft VideoImpression You can use the StyleCam Deluxe with the VideoImpression software to capture and record live video, and then send it to your friends and family.
Uninstalling Software__________________________ __ You can uninstall the software using “Add/Remove Program” in the Control Panel of your computer. Note: Use this procedure only when the installed software is no longer required or when software installation fails. Please follow the steps below to uninstall your software. 1. Click to open “My Computer” from your desktop screen. 2. Double click on the “Control Panel” icon. 3. Double click on the “Add/Remove Programs” icon in the Control Panel. 4.
Camera Maintenance __________________ Please read the following information to ensure that you use your StyleCam Deluxe correctly. Places to Avoid Do not store or use the camera in the following types of locations: • Very humid, dirty or dusty places • In direct sunlight or in places subject to extreme temperature, such as in a closed car in summer.
Troubleshooting ____________ If you encounter any hardware or software problem with your StyleCam Deluxe, please refer to the troubleshooting list below to find a possible solution. Symptoms Problems Solution All the images I have taken do not The StyleCam Deluxe may have lost all power by: appear on the StyleCam Deluxe 1. Insufficient battery power Upload all images to yours PC as soon as possible. 2.
My CD installation wizard does The auto installation file is not work. switched to off. Or the CD-ROM is right-click on “My Computer”. disconnected. Go to your computer desktop, and Select “Properties” Æ “Device Manager”. Double click on “CD-ROM”, and then double click on “CD-R”. Click on “ Setting”, make sure “Auto insert notification “ is checked and the “Disconnect “ is checked. If you change the settings the computer will ask you to restart your PC.
Product Specification ________ SiPix StyleCam Deluxe Image sensor 1280 x 1024 CMOS sensor Image resolution Still picture: 1280 x 1024, 640 x 512 Movie: 320 x 240 Internal memory 16MB SDRAM Image capacity Superfine: 9 Images (Approx. only) (Based on 16MB SDRAM) Fine: 32 Images (Approx. only) Economy: 144 Images (Approx. only) Movie: ~1 minute (Approx. only) Audio: ~ 50 minutes (Approx.
One Year Limited Warranty – USA & Canada SiPix, a Foxlink Peripherals, Inc. brand, warrants this hardware product against defects in material and workmanship for a period of one year from the original date of purchase as identified on the proof of purchase (your receipt). It is the end-user’s responsibility to make certain this product is in working condition with the intended computer system within the one-year warranty period.
Warranty Service – USA & Canada If your SiPix product needs to be returned for repair, you must contact SiPix technical support prior to shipment for an RMA number before sending in the product. The RMA number is a Return Merchandise Authorization number. SiPix will refuse all shipments without a proper RMA number. The RMA number MUST be printed on the outside of the original shipping carton in large print written in black ink next to the shipping label.
Technical Support – USA & Canada SiPix provides technical support at no cost during the one-year warranty period. Users with questions or concerns of a technical nature should first refer to the product manual, as usage and troubleshooting information is provided in detail. For additional information or assistance, users should visit the SiPix Web-site, as tutorials, updated drivers, frequently asked questions and news updates are available. www.sipixdigital.
Technical Support & Warranty - EUROPE Technical Support SiPix provides technical support at no cost during the two-year European warranty period. Users with questions or concerns of a technical nature should first refer to the product manual, as usage and troubleshooting information is provided in detail. For additional information or assistance, users should visit the SiPix Web-site, as tutorials, updated drivers, frequently asked questions and news updates are available at www.sipixdigital.
Technical Support & Warranty – ASIA PACIFIC Technical Support Upon receipt of this SiPix product you are immediately eligible for Technical Support during the warranty period of ONE YEAR from the purchase date. For technical support please call 886-2-8226-9298.
