Submittal Sheet

commercial catalog
77
SPECIFICATION
Sioux Chief 852 Series adjustable cleanout shall be used where necessary
in drainage systems. Cleanout shall have an MIP thread connection,
for attachment to FIP tting. Cleanout cover shall meet applicable
load requirements for intended use. Cleanout shall include a slotted,
polypropylene cleanout plug.
MATERIALS
ring/cover: nickel-bronze, 304 stainless steel, cast iron, tenzalloy,
brass, or ABS
thread body: ABS
cleanout plug: slotted polypropylene
COVER LOAD RATING
nickel-bronze: 4,000 lbs. (medium duty)
stainless steel: 4,000 lbs. (medium duty)
cast iron: 5,000 lbs. (heavy duty)
brass: 4,000 lbs. (medium duty)
tenzalloy: 1,250 lbs. (light duty)
ABS: 1,000 lbs. (light duty)
DIMENSIONS
round square cast
pattern pattern iron
A: ring/cover diameter
2" cleanout 4½" --- ---
3" cleanout 5½" 5⅝" 6⅛"
4" cleanout 6½" 6
11
⁄ 16 " 6⅝"
B: height 2⅞" 2⅞" 3⅜"
C: plug
2" cleanout 1½" MIP --- ---
3" cleanout 2½" MIP 2½" MIP 2½" MIP
4" cleanout 3½" MIP 3½" MIP 3½" MIP
852- A B C
852 series
A CONNECTION SIZE
□ 2 2" MIP thread ¹
□ 3 3" MIP thread
□ 4 4" MIP thread
1 2" is only available with round nickel-bronze or
stainless steel ring and cover.
B RING & COVER
□ LNR round nickel-bronze
□ LNQ square nickel-bronze
□ LSR round stainless steel
□ LSQ square stainless steel
□ Li round cast iron
□ LBR round brass
□ LBQ square brass
□ LTR round tenzalloy
□ LP round ABS ²
2 ABS thread body provides integral cover ring
C OPTIONS (FACTORY INSTALLED)
□ V vandal-resistant cover screws
□ S stamped cover, specify letters
³
3 NOT available with cast iron ring & cover
e.g. 852-4LSQV = 4" MIP thread cleanout with square stainless steel cover and vandal-resistant screws
ADJUSTABLE CLEANOUT
Create Item Number
852-3LNR
A
C
B
Sioux Chief Manufacturing Company • tel: [phone] • www.siouxchief.com • fax: [phone]
Item # Submitted �����������������������������������
Job Name �����������������������������������������
Location ������������������������������������������
Engineer ������������������������������������������
Contractor ����������������������������������������
PO# �������������������� TAG ���������������������
1-10