Install Instructions

Strong Arm

™

with Lock Blocks

™

Instruction Sheet

Secure top bracket to studs on

each side of stud bay. Do NOT

secure bottom bracket yet.

With bottom bracket still

loose, slide Lock Blocks across

brackets to desired stub out

location.

stall stub outs or stub out

bows.

Tighten each screw on each

block to secure stub out

and prevent horizontal

movement.

Bend bottom bracket as close

as possible to Lock Block and

secure bracket to stud.

etermine stub out height.

mpleted installation (as

commended).

Alternate completed in

stallation. Alternate completed installation.

800-821-3944 • www.siouxchief.com

Patent # 8,141,831

PAGE 1
Strong Arm with Lock Blocks ™ ™ Instruction Sheet 1 etermine stub out height. 4 stall stub outs or stub out bows. 2 Secure top bracket to studs on each side of stud bay. Do NOT secure bottom bracket yet. 5 3 With bottom bracket still loose, slide Lock Blocks across brackets to desired stub out location. 6 . Tighten each screw on each block to secure stub out and prevent horizontal movement. Bend bottom bracket as close as possible to Lock Block and secure bracket to stud.
PAGE 2
Strong Arm with Lock Blocks ™ ™ Bulk Assembly Instruction Sheet Female (Front) Block 1 Male (Back) Block 2 3 front of bracket Lay a pair of Strong Arm brackets in the upper and lower bracket slots of the male Lock Block. NOTE: The male block must be installed on the back of the brackets, as shown above. Position the female block directly on top of the male block. Be sure the each bracket is captured by the bracket slots on both the male and female blocks. Patent # 8,141,831 1-800-821-3944 • www.