BEFORE YOU START Declaration of Conformity Responsible Party: Elite Brands Inc. Address: 40 Wall St, Flr 61, New York, NY 10005 USA Company Website: www.elitebrands.com ; www.minoltadigital.com For Customers in the U.S.A. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
About this Manual Thank you for purchasing this MINOLTA MN67Z Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. Elite Brands Inc. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of Elite Brands Inc.
SAFETY NOTES Safety Notes for this Camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to help prevent dust or sand from entering the camera, causing possible damage. Do not use or store the camera in a hot environment or in direct sunlight. Do not use or store the camera near powerful magnetic fields, such as a magnet or transformer. Avoid touching the lens of the camera.
When you clean the body of the camera, do not use abrasive, alcohol-based or organic cleansers or solvents. Use a professional lens cleaning cloth and appropriate cleaner to wipe and clean the lens. Download your photos and remove the memory card when you are going to store the camera for long periods of time. If this camera is not in use for a long period of time, please keep it in a dry and clean storage location.
Safety Notes for Battery Please use a battery that is the same type as the one included. Please use the attached charger to charge the battery. If battery fluid leaks inside the camera, contact our customer service department immediately. If battery fluid leaks onto your skin, rinse your skin immediately with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with your local (national or regional) regulations.
When the camera is stored for a long period of time, remove the battery and keep it in a safe, dry place that is not accessible to infants and children. In colder environments, the performance of the battery could be noticeably reduced. When you install the battery, align the battery markings according to the positive and negative markings inside the camera battery compartment. Never force the battery into the battery compartment.
Safety Notes for SD Memory Card We highly suggest buying only well-known, name brand memory cards to ensure peak performance and reliability. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline and FAA regulations. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
CONTENTS BEFORE YOU START............1 SAFETY NOTES....................4 CONTENTS............................10 GETTING READY..................14 Accessories Included.........................14 MODE OVERVIEW................27 LCD Display.......................................27 Overview of the Screen Icons in Shooting Mode.............................27 Overview of the Screen Icons in Movie Mode.................................29 Installing Lens Cap and Neck Strap...
Display Setting...................................53 AF Area..............................................55 Macro Mode.......................................56 Self-Timer Mode ................................57 Flash Mode .......................................58 WB (White Balance) Mode ................60 Continuous Shot Mode.......................62 Exposure Compensation Functions Setting................................................64 EV Adjustment.............................64 ISO Adjustment.........
Image Size...................................82 HDR Movie Size...................................83 Touch-Up Quality..........................................84 MF (Manual Focus) Assist...........85 AF Assist Beam...........................86 Digital Zoom.................................86 Shoot Setting 2...................................87 ...............................96 ..................................97 Playback Settings ..............................97 Protect.................................
Format ........................................105 Print DPOF Images......................115 Copy to Card................................106 Exit...............................................115 File Numbering............................106 Video System.....................................116 Reset Settings.............................107 Supported HDMI Connections...........117 Version.........................................107 Connecting HDMI-Ready TV.......117 CONNECTION SETTINGS.....
GETTING READY Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer first or our customer service center (Based on sales in different countries or regions, the shape of the AC adapter will vary. Please subject to the actual product will prevail.
Installing Lens Cap and Neck Strap 15
Part Names 4 5 6 7 1. Micro HDMI Port 8 9 10 2. Micro USB Port 11 4. Shutter Button 3. Zoom Lever 5. Strap Eyelet 3 2 1 6. Exposure Compensation Button 7. Continuous Shot Button 8. Power Button 9. AF Assist Beam/Self-Timer Lamp 10. Flash Lamp 11.
12. Microphone 13. Electronic View Finder (EVF) 5 12 13 14 15 14. 16 17 18 16. Mode Dial 17. Fast Video Recording Button 18. Menu Button 19. 23 22 21 20 Jog Dial [ 19 Rolling the button. EVF / LCD Switch Button 15. Indicator Lamp [ ] AF Button/Up Button ] Delete Button/Self-Timer Button/Down Button [ ] Macro Button/Left Button [ ] Flash Button/Right Button 20. Display Button 21. Playback Button 22. SET Button 23.
24. Vari-angle LCD 25. Diopter Adjustment Knob 26. Speaker 27. Lens Function Ring Lever 28. Lens Function Ring 28 27 26 25 24 29. Battery Cover 30.
Installing Battery and SD Memory Card 1. Open the battery cover door. 1 2 2. Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the picture. Push the battery down until it locks in place.
3. Insert the memory card into the memory card slot as shown in the diagram: 4. Close the battery cover door. 1 Write Protection Toggle Switch 2 This camera takes a standard (SD/SDHC) memory card. We recommend using a name brand memory card that is Class 4 or higher and has a capacity of 4GB to 32GB. The camera is not compatible with Micro SD, Ultra, Ultra Plus, Extreme, XC, or adapters for any of these other memory cards.
Charging the Battery Before you charge the battery, you should turn the camera off and insert the battery. 1. Connect the camera to the power charger using the supplied Micro USB cable. 2 2. Insert the plug of the power charger into the power outlet to charge the battery. After the battery is stored for long periods of time, use the supplied power charger to charge the battery prior to use.
Vari-Angle LCD The LCD is housed in the camera’s body. You may follow the directions shown below to move it as needed: 2 3 1 4 1. Open the LCD panel along the direction shown by arrow ①. 2. Rotate up to 180° along the direction shown by arrow ②. 3. Rotate up to 90° along the direction shown by arrow ③. 4. Close the LCD along the direction shown by arrow ④. Please don’t rotate the LCD with excessive force to prevent damages.
Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button When the power is off, press and hold the playback Playback mode.
Set your Language, Date/Time Set your Language, Date/Time after the First Power-On 1. When you turn the camera on for the first time, the language selection screen appears. 2. Press the [ ]/[ ] button to select your desired language. 3. After you press the button to confirm your language selection, the Date/Time settings screen will appear. Language Sound Settings য檥Иކ Power Saver Powe World Time Home 2019.07.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your language. 1. Press the button, press the [ ] /[ ] button to select and press the button to enter the menu. 2. Press the [ . ]/[ ] button to select 3. Press the [ ]/[ ] button to select [Language] and press the button to enter the menu. 4. Press the [ ]/[ ] button to select your desired language and press the button to confirm. 5. Press the button and the shooting screen will appear.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. 1. Press the button, press the [ ] /[ ] button to select , and press the button to enter the menu. 2. Press the [ . ]/[ ] button to select 3. Press the [ ]/[ ] button to select [Date & Time] and press the button to enter the menu. Sound Settings Power Saver World Time Home 2019.07.01 00:00 LCD Brightness Select Set Exit Date & Time H-M 5.
MODE OVERVIEW LCD Display Overview of the Screen Icons in Shooting Mode 1 23 4 5 6 7 8 9 10 00:00:00 11 12 13 14 15 0000 x3.0 16 17 18 EV-0.0 F00.
00:00:00 0000 x3.0 31 30 29 28 27 26 25 EV-0.0 F00.
Overview of the Screen Icons in Movie Mode 1 00:00:00 4 3 00/15 2 1 Battery Status 2 Number of Videos Captured 3 Continuous Recording Time 4 Movie Mode 29
Overview of the Screen Icons in Playback Mode 1 2 3 4 5 6 2019/07/01 000-0000 15 14 13 12 7 0000 x2 Thumbnail3x3 30 8 9 10 11 1 Quality 9 2 Capture Date 10 Image Zoom Ratio 3 File Name 11 Index Prompt 4 Shooting Pixel Ratio 12 Touch-Up 5 Image Size 13 HDR 6 Battery Status 14 DPOF File Icon 7 Continuous Shot Group Playback 15 File Protection Icon 8 Image Area Zoom Magnification Area
How to Take Pictures 1. Hold the camera with both hands, being careful to not block the flash and lens with fingers. 2. Point the lens toward the object you want to take a picture of, and then frame it with the LCD. 3. Use the Zoom button to select Tele or Wide positions to zoom in or out on your subject. 4. Press the shutter button halfway to focus on the subject. When the focus frame turns green, press the shutter button down completely to take the picture.
Using the Mode Dial This camera provides a convenient Mode dial that allows you to manually switch between different modes with ease. The available modes are listed below: Mode Name 32 Icon Description Auto Mode In this mode, the optimal conditions for taking pictures will be set based on the subject and environment. It is the most commonly used mode for taking pictures.
Manual Mode This mode is for manually setting the aperture, shutter speed and ISO value. Face Beautifier This mode automatically enhances facial features with skin softening touches and eye brightening capabilities. Wireless Mode Enable image transmission and remote control by connecting smart device with wireless network. Scene Mode Choose from 14 different pre-set scene types and effects for your photos. Movie Mode Record videos.
Please refer to the table below if any nonadjustable options in mode: (O: Available X: Not available) Mode Options Aperture Shutter EV ISO X X O O X O O O O X O O O O X O 1. Turn the mode dial to select the 2. Press the 3. Press the [ 4. Press the [ 5. Press the mode you want. button to configure settings. ]/[ ] button to select an adjustment setting. ]/[ ] button to adjust the parameters. button to confirm the settings and enter the shooting screen.
Face Beautifier 1. Turn the Mode dial to select Face Beautifier Mode ( 2. Press the button and press the [ ]/[ ). ] button to select . 3. Press the [ ]/[ ] button or turn the jog dial to select an option and press the button to confirm and enter the shooting screen.
Wireless Mode Enable image transmission and remote control by connecting smart device with wireless network. Before utilizing Wireless Mode, please review the following: Your smart device operating system version needs to be iOS 10 or higher, or ANDROID 5.0 or higher. If not, please upgrade your smart device before using the APP.
AP Mode 1. Rotate the mode dial to and then enter the wireless network selection interface. This camera may connect with your smart device through wireless network. 2. Press the [ ]/[ and set options. Settings of Camera: ] button to select 1. Select the and press the enter the setting interface. Wireless Mode Settings Station AP mode In AP mode, the camera will act button to 2. Press the [ ]/[ ] button to select options to be adjusted, and press the button to enter the option setting interface.
Station Settings of Smart Device: 1. Enable the wireless network of smart device and then search surrounding wireless network devices. 2. Select the name of camera SSID to be connected and then input the eight-digit number password after WPA2-PSK on the camera. 3. Click the icon of the APP the APP. to enable Set up completion: Once the APP is connected to the camera, functional operations can be enabled on the smart device.
Press the [ ]/[ ] button to select: Enter Password • Scan: Search again surrounding wireless network devices. • : Select the name of device to be connected. A/a #!? • Back: Back to Wireless Mode select screen. 4. Press the [ ]/[ ]/ [ ]/ [ ] button or turn the jog dial to select and then press the button to confirm your selection. You will enter the completion of WPA2- PSK after the password is saved.
5. Connect to network after saving the password. • If connected, the LCD will display as shown below: Wireless Mode The wireless network has successfully connected but APP is not enabled. Wireless Mode Station AP mode . Connected with device SSID: XXXXXXXX Connected with device Disconnect • Display of Wireless network Connection Status: If connection failed, please check wireless network device and try again. 6. After connecting, click the icon of the APP on the smart device.