User Manual
CONTENTS....................................................... 1 BEFORE YOU START....................................... 3 FCC Warning......................................................................... 3 For Customers in Europe....................................................... 4 About this Manual.................................................................. 4 SAFETY PRECAUTIONS.................................. 5 GETTING READY.............................................
Setup iShow (wireless projector) app for projection ..........................................................12 For iOS system...................................................................... 12 For Android system................................................................ 13 For Windows system............................................................. 15 Set the application (available only in wireless connection)........................................................17 SSID...................
1 BEFORE YOU START FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For Customers in Europe "CE" mark indicates that this product complies with the European . requirements for safety, health, environment, and customer . protection. "CE" marked products are intended for sales in Europe. This symbol [crossed-out wheel bin WEEE Annex IV] indicates separate collection of electrical waste and electronic equipment in the European countries. Please do not throw the equipment into domestic refuse. Please use the return and collection systems .
2 SAFETY PRECAUTIONS When using a pico projector, please note the following safety precautions to prevent damage to the product. Do not dispose of improperly or expose to extreme heat. Do not operate the pico projector in moist or wet environments. Exposure to water may cause electrical shock or other injury. Avoid exposure to extreme temperatures as this may damage the . pico projector. Do not operate the pico projector if damaged. Disassembling the pico projector will void the warranty.
3 GETTING READY Accessories Included Your KODAK iShow 1000 Pico Projector box should contain the pico projector you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer.
Part Names Focus Slider Speaker Power Button Status Indicator Earphone jack HDMI Port Power inlet Tripod Receptacle Support Reset hole Lens
Charging Battery 1. Ensure the projector is turned off and connect it to the power charger. 2. Insert the plug of the power charger into the wall outlet to charge the battery. 3. Charging indicator:. Red: Charging. Green: Charging complete 4. To have maximum battery life, charge the battery for at least 4 hours the first time.
Downloading and installing iShow (wireless projector) app 1. For iOS system users: Please search for the iShow (wireless projector) app in the App Store, download the app, and install it on your device. 2. For Android system users: Please search for the iShow (wireless projector) app in Google Play, download the app, and install it on your device. 3.
4 Basic Operations of the Projector Turning on the projector 1. Press and hold the power button for three seconds to power up the projector. The button can be released when the status indicator lights up. 2. The projector will display the start up screen. Pico Projector Setting up the projector using the support 1. Open the support. 2. Place the projector on a stable surface.
Adjusting focus 1. Move the focus slider to adjust the clarity of the . projected image. 2. Stop moving the slider once the projected image . becomes clear. Turning off the projector 1. Before turning off the projector, close any files that are being displayed. 2. Press and hold the power button for three seconds to turn off the projector. Resetting the projector In case the projector acts erratically and/or the system crashes, . please press the reset hole (located on the bottom of the projector) .
5 Setup iShow (wireless projector) app for projection Due to each operation system compatibility, some documents may experience difficulty of formatting. We recommend to use PDF file format to minimize any format compatibility while projecting. While your device is wirelessly connected to the KODAK iShow 1000 Pico Projector, any device live streaming function (such as YouTube ®, Facebook ®) and web browsers will be disconnected from the internet.
8. When the pico projector starts, your device's wireless network will automatically detect the signal “iShow-P02xxxxxxx” (signal name is the same as the SSID name, which can be set by the user). Select this signal and your device will be connected to the projector. on your 9. Click on the installed iShow (wireless projector) app device and the file selection pane will show up as below image. 10. Select the file you want to project by tapping on the applicable file in the selection pane. 11.
3. Once completing iShow (wireless projector) app installation, you may directly jump to step 6 start connecting your device and KODAK iShow 1000 Pico Projector to project. If you still need sync documents into Android device before projecting, please follow step 4 instructions. 4. To sync documents into Android device. You may use cable connection to sync and save files into Android device's disk anywhere to enable iShow (wireless projector) app locate files in the device.
First time using iShow (wireless projector) app on your Android device, the scanning process may take a period of time to complete. The scanning time varies by Android version and quantity of files on the device. 9. Select the file you want to project by tapping on the applicable file in the selection pane. 10. By tapping the file type icons (Documents, Pictures, Video Files) at the top of the selection pane, you may navigate through your files much easier while projecting. For Windows system 1.
5. Click the setting button on the interface of iShow (wireless projector) app, then select 「Add File Folders」 to add the folders (you can add up to 10 folders) you would like to project in the file management. You can also choose 「Open File」 to select a single file in the file management, and click 「Send」 to project. again to return to the previous interface, 6. Click the setting button select the file you want to project by tapping on the applicable file in the selection pane. 7.
6 Set the application (available only in wireless connection) In iShow (wireless projector) app, tap the Setting button to configure . appropriate settings in iShow (wireless projector) app. The menu tree where the following operations are found under the settings button vary by device and version. You can configure: SSID You may change the name of the wireless network. You may also set the network security, and set the wireless network to open or encrypted mode.
Keystone Correction You can use and to apply keystone correction to the projected screen in order to adjust it to a proper shape for easy viewing. About You can use this option to find out the current version and copyright . information of your iShow (wireless projector) app.
7 Using HDMI for projection If your device supports HDMI output, you can use an HDMI cable to connect your device to the KODAK iShow 1000 Pico Projector for mirroring what is on your display regardless of any app running. Using the HDMI cable specifically designed for your device enables you to use live streaming apps (such as YouTube ® , Facebook ®) while running the KODAK iShow 1000 Pico Projector. 1. Start the projector. 2.
8 Firmware Update When there is a new version of firmware, follow the following steps to update the firmware of the projector: 1. Download the new firmware to the computer's hard drive. 2. Turn on the KODAK iShow 1000 Pico Projector and connect to the power charger. 3. Use the wireless network to connect the computer containing the firmware upgrade to the projector. Open a web browser, and enter . the IP (192.168.203.1) to access to the firmware update interface. 4.
9 Projector Specifications Type DLP Focus Range (diagonal) 5-50inches Throw Distance Approx.16.5-165cm Resolution 854×480 pixels Image Brightness 35 Lumens Contrast Ratio 500:1 Connector Power inlet, earphone jack, HDMI Type A Speaker Mixed stereo output Support wireless network Yes Picture *.jpg, *.png; photo supports up to 24 mega-pixels Video *.3gp, *.mp4, *.mov, *.m4v; supports up to 1080p30 Supported projection file formats Microsoft® Word® (*.doc, *.
22 Supported operating systems Android 2.3.0 or higher, iOS 4.3.1 or higher, Windows 7, Windows 8 Focus Control Manual Power Built-in rechargeable Li-polymer battery 3.7V 2800mAh Capability Up to 90 mins Operation Environment Temperature: 32 ~ 95°F / 0 ~ 35°C, Humidity: 10 ~ 80% Storage Environment Temperature: 32 ~ 113°F / 0 ~ 45°C, Humidity: 0 ~ 60% Product Dimension Approx.125.0×60.0×22.5mm Product Weight Approx.
The Kodak trademark and trade dress are used under license from Kodak. © 2013 by JK Imaging Ltd. All rights reserved. JK Imaging Ltd. 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA www.kodakcamera.jkiltd.