Setting To disconnect from Wi-Fi: Wi-Fi Mode Disconnect from device? No The name of this camera can be changed under Wi-Fi settings. 1. Select the and then press the enter the setting interface. button to 2. Press the up/down buttons to select options to be adjusted and then press the button to enter the menu. Yes • No: Keep Wi-Fi connected and back to previous page. • Yes: Disconnect and back to Wi-Fi connection screen.
DSC Device APP Operating Instructions The default name of DSC device is [PIXPRO WPZ2_ XXXX]. Change the name of DSC device through typing. Refer to the "PIXPRO Remote Viewer User Manual" located on the web: Americas DSC Device PIXPRO WPZ2_XXXX A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A/a 1 2 3 4 5 6 7 9 0 #!? http://kodakpixpro.com/ Americas/support/downloads.
BASIC OPERATION Using the Zoom Function Your camera is equipped with two types of Zoom Functions: Optical Zoom and Digital Zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. Zoom Indicator When the Optical Zoom reaches the threshold as Digital Zoom, release and turn the Zoom Button to T to switch between the Optical Zoom and Digital Zoom.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the left arrow button ( Macro Menu. ) to enter the • Macro Off Select this option to disable Macro. • Macro On Select this to focus on subjects 5cm from the lens. 3. Press the button to confirm the settings and exit the menu. Macro Off 2.
Self-Timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set to 2 seconds, 10 seconds or when a smile is detected. 1. Press the down arrow button ( Self-Timer Menu. • Self-Timer 10 sec A single picture is shot 10 seconds after the Shutter Button is pressed. • Self-Timer Smile Press the Shutter Button and a picture will be taken immediately after a smile is detected. ) to enter the 3. Press the button to confirm the settings and exit the menu.
Flash Mode The flash provides supplemental light for scenes. The flash is usually used when shooting against the light to highlight the object; it is also suitable for metering and shooting in darker scenes to improve the exposure. 1. Press the right arrow button ( Flash Settings Menu. ) to enter the Force Off 2. Press the left/right arrow buttons to select one of the following 6 modes: 48 • Force Off Flash is turned off. • Flash Auto Camera flash goes off automatically based on lighting conditions.
EV Setting The EV function menu of the camera includes functions, such as EV (Exposure Value) Adjustment, ISO, Shutter Adjustment, Aperture Adjustment, etc. Using the appropriate function settings can improve your pictures. Exposure Compensation To select the best setting for optimum photos, follow these steps: (This can be adjusted in 1. Press the screen. Set up to adjust the picture brightness.
ISO Shutter Adjustment ISO allows you to set the sensitivity of the camera sensor. Please use a higher ISO value in darker places and a lower value in brighter conditions. For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed to obtain the most suitable exposure value. The movement of objects may be shown by adjusting the shutter speed.
Using Quick Recording While in the Photo Shooting Mode, press the Quick Video Recording Button to begin recording a video. 00:00:06 Once you are finished, press the Quick Video Recording Button or the Shutter Button to stop and store the video. The camera’s Micro SD Memory Card (max 32GB ) will store the video and return to the shooting screen.
PLAYBACK Overview of the Screen Icons in Playback Mode 1 2 1 3 1/45 SD 13 12 11 DPOF File 2 File Protection 4 5 3 Memory space (indicating the current number of photos and total number of photos) 4 Memory Card/Built-in Memory 5 Battery Status x2 25 10 2019 08-01 15:37 9 6 7 8 6 Zoom Magnification Area 7 Image Zoom Ratios 8 Image Zone 9 Shooting Date 10.
Viewing Photos and Videos To view captured photos and video clips on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Use the left/right navigation buttons to scroll through the photos or video clips stored on the built-in memory or on the Memory Card in the camera. 3. To play a selected video clip, press the button to enter the Movie Playback Mode. An operation guide appears on the screen when playing back a video.
Thumbnail View When in Playback Mode, press the on the Zoom button to display thumbnail images of photos and videos on the screen. 3. Press the arrow buttons to select a picture or video clip to view and press the button to restore it to the original size. indicator appears on the LCD, then If the a movie file is currently being displayed. 1. Slide the Zoom button to switch between 3 x 3 and 4 x 4 thumbnails. 2.
Using Zoom Playback (for Still Pictures Only) When playing back photos, you can also use the Zoom Button to zoom in on the photos, 2 to 8 times their original magnification. 4. Press the arrow buttons to navigate and select the desired portion of the photo to be zoomed in on. 5. Press the button to return the image to its original scale. Movie images cannot be magnified. 1. Press the left/right buttons to select the picture on which to use the zoom feature. 2. Press the on the Zoom Button to zoom in. 3.
Continuous Capture Group Playback Cont.Shot-High Speed (VGA) and Cont.Shot-Fast (4M) can make continuous capture for group image playback. 1. Press the button to enter playback screen. 2. Press the left/right buttons to select Cont. Group. 3. Press the to start playback.
Animation Panorama Play Panoramic Animation Playing is when full size images are played in accordance with the shooting direction. After playing, it will automatically return to the initial panorama screen. 1. Press the button to enter Playback Screen. 2. Press the left/right arrow buttons to select animated panoramic photos. 3. Press the button to play in selected shooting direction.
Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press the button to enter playback screen. 2. Press the button to enter slide option. 3. Press the left/right buttons to select slideshow playing or [Cancel] to return to the playback screen. 4. Press the 58 button to confirm the setting.
Deleting Photos and Videos In Playback Mode, press the down arrow button ( ) to select your desired photos and videos. To delete photos or videos: 1. Press the button to switch to Playback Mode. 2. Press the left/right arrow buttons to select the photos and videos to be deleted. 3. Press the down arrow button ( deletion screen is displayed. ) and the 4. Press the up/down arrow buttons to select [Delete One] or [Exit] and press the button to confirm. Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Setup Menu Expo Metering (Exposure Metering) Mode: 1. In Photo Shooting Mode, press the enter the Photo Shooting Menu. button to Use this setting to select the "target" size of the camera's field of view to be metered. 2. Press the up/down arrow buttons to select the Photo Shooting Menu and settings. 3. Press the left/right arrow buttons to select the Photo Shooting Menu to be set and press the button to confirm.
Image Size Continuous Auto Focus (AF ) The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the photo image quality. Use the Continuous AF setting to be able to continuously focus automatically when taking pictures. There are 2 options: The bigger the number of recorded pixels is, the better the image quality becomes.
Continuous Shot Use this setting to perform continuous shooting. After entering this mode, you can shoot multiple images by continuously holding the shutter button down. There are 8 options: 62 • Single Capture a single shot only. • Continuous Shot Take several pictures at a time. • Cont.Shot-High Speed (VGA) For continuous shot with VGA pixel. • Cont.Shot-Fast (4M) For continuous shot with 4M pixels.
Focus Setting White Balance Setting This setting allows you to select different modes for optimum focus. The white balance setting allows you to adjust the color temperature for different lighting conditions to ensure the most accurate color reproduction. 1. Press the button to enter the white balance setting menu. 2. Press the left/right arrow buttons to select the White Balance Setting options.
• Fluorescent CWF Color Effect • Incandescent • Manual WB (Fully press the Shutter Button to detect the white balance value) The Image Color Setting allows you to select different color effects. • Color Temp. (1900K~10000K) Press the direction buttons up/down to "Adjust the K value"; Press the direction button left to exit the K value. • Underwater There are 4 options in AWB • Manual WB (Fully press the Shutter Button to detect the white balance value) • 64 mode: • • 1.
Select Scene Select a scene mode under SCN Mode. • Black and White • Sepia • Partial Color-Red Press SET To Select Scene • Partial Color-Blue Night Portrait • Partial Color-Yellow • Partial Color-Green • Negative • Dreamy • Vignetting • Salon • Fish Eye • Reflection • 4 Grids -Stylish(2M) • Sketch Please refer to P32 for more detailed instructions.
• Options in the shooting mode (O: Available X: Unavailable) Shooting Modes Options 66 O O O O O O O O X O X X X O X X O O X O X O O X O O O O X X X O O X O X O O O X
Photo Shooting Setting Menu Mode: Quality 1. Press the button in Photo Shooting Mode and press the up/down buttons to select . The quality setting can be used to adjust the image compression ratio. Quality Best Fine Normal 2. Press the button to enter the menu. 3. Press the up/down arrow buttons to select and press the button or right arrow button to enter the menu. 4. Press the up/down arrow buttons to pick the item to be selected and press the button or right arrow button to enter the menu.
68 Auto Focus (AF) Assist Beam Digital Zoom In a darker environment, the AF assist beam setting can be turned on for better focus. This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time.
Face Detection Detects and focuses on faces to make all faces as clear as possible in Photo Mode. Face Detection 2. Press the shutter button half-way down to focus. The LCD will show a green focus frame when the subject is in focus. 5LL 5T 1. Hold the camera steadily and then focus on the object to detect its face. A focus frame will appear at the face on the screen when a face is detected. F3.0 1/15 3. Press the shutter button all the way down to take pictures.