GPS Tracker ST-906 (ST-906W) User Manual 1/12
Quick Start Thank you for purchasing our GPS tracker. This Quick User shows how to operate the device smoothly and correctly. WEBSITE Tracking (PC Version): Platform: www.sinotracker.
You can also down load our APPS on website to track on your mobile: 1. Choose GSM card, it should be Normal SIM card, without PIN code. 3. Proper insert GSM card, the tracker will start, connect external power supply. 4. Put device outside around 30s, LED lights will keep lighting on stands for device can work normally.
5. Dialing device number, it will hang up and reply tracking message with valid Lon and lat. 6. Please send SMS to tracker to set the APN: (the yellow place is BLANK) SMS: 8030000 APN (APN is Access Point Name of your SIM Card, please check with your SIM Card provider if you don’t know it) If the APN need User name and Password, please send the command: SMS: 8030000 APN APNuser APNpassword 7. Send SMS to set trackers to our server: SMS: 8040000 45.112.204.217 8090 8.
LED Status 1.1. Blue LED--- GPS Status Status Flashing ON 1.2. 1.3. Meaning No GPS Signal or GPS starting GPS OK Orange LED---GSM Status Status Flashing ON Meaning No SIM card or GSM starting GSM OK Red LED---GSM Status Status OFF Flashing Meaning Tracker is off or sleep Tracker is Working The default password is: 0000 The default mode is normal working (ACC Mode). GPS Status: A is get location, V is invalid location. Alarm mode is on. Alarm will send to the 3 control number.
Installation: 1. The GPS antenna side should towards to clear sky. (Can’t put under Metal, but Glass and Plastic is ok) 2.
Functions: 1. Set control number：(serial from 1 to 3) Command: Number+pass+blank+serial Sample: 139504434650000 1 13950443465 is mobile number, 0000 is password, 1 is serial means the first number. When the tracker reply “SET OK” means the setting is ok. You can set the second and third control number also.
4. Get location with Google link Command: 669+password Sample: 6690000 When ST-906 receives the command, it will send back the location with Google link; You can open the link to check the tracker location on maps. 5. Get location by phone call. You can use any mobile to call the SIM Card in tracker, it will reply the location with Google link; you can open the link to check the tracker location on maps.
8. Geo Fence (send alarm to the first number only) Open Geo Fence: 211+password Sample: 2110000 Reply: SET OK Close Geo Fence: 210+password Sample: 2100000 Reply: SET OK Set the Geo Fence Sample: 0050000 1000 (the Geo Fence is 1000 meters) Reply SET OK We suggest the Geo Fence more than 1000 meters. 9. Over speed Alarm (send Alarm to control numbers) Command: 122＋Blank+XXX Sample: 1220000 120 Reply: SET OK The XXX is the speed, from 0 to 999, the unit is KM/H.
Sample: 1430000 Reply: CURRENT TOTAL MILEAGE:XX. XX is the mileage, the unit is meter. 11. Shock Alarm (send SMS alarm to the first number) Open Shock Alarm: 181+password+T Sample: 1810000T10 Reply: SET OK The T meaning shocking time, the unit is second, It from 0 to 120 senconds. Close Shock Alarm: 180+password Sample: 1800000 Reply: SET OK 12.
14. Cut Engine remotely Cut Engine command: 940+password Sample: 9400000 After tracker receive command, it will cut engine and send back “SET OK” Recover Engine command: 941+password After tracker receive command, it will recover engine and send back “SET OK” 15. Set APN Command : 803+password+Blank+APN Sample: 8030000 CMNET Reply: SET OK If your APN need user and pass: Command : 803+password+Blank+APN+Blank+APNuser+Blank+APNpass Sample: 8030000 CMNET CMNET CMNET Reply: SET OK 16.
Other Functions: 1. RESTART The tracker will restart. 2. RCONF Read the configure of tracker Tracker will reply: ST901,ID: 8160528336,UP:0000,U1:,U2:,U3:,MODE:GPRS DAILY:OFF,GEO FENCE: OFF,OVER SPEED:OFF VOICE:ON,SHAKE ALARM:OFF,SLEEP:OFF,APN:CMNET,,,IP:45.112.204.217:8090,GP RSUPLOAD TIME:20 TIME ZONE:E00 ST901: software version ID: 8160528336 (Tracker ID) UP:0000 (password, default is 0000) U1:the first control number, U2:the second control number, U3:the third control number.
