The products and programs described in this Operations Manual are licensed products of SCS. This Operations Manual contains proprietary information protected by copyright, and this Operations Manual and all accompanying hardware, software, and documentation are copyrighted.
CONTENTS INTRODUCTION. ¥ ADVANTAGES INSTANCE MODEL S512 SCANNER! PACKAGE CONTENTS... ‘WHAT ELSE YOU NEED CONVENTIONS IN THIS MANUAL SUMMARY OF CHAPTERS AND APPENDIXES . APPLICATIONS —— INTELLIGENT OBJECT SENSING INVENTORY ASSESSMENT... MANUFACTURING APPLICATIONS... INSTALLATION S512 LESS AND CONNECTORS $512 INSTALLATION STEPS Connecting External Antenna, Placing the Antenna... Connecting to ¢ PC Serial Port Connecting to an AC Outlet. Configuring the $512 Aligning the 8512. INSTALLING EPIDURALS ..
INTRODUCTION he Model 5512 Scanner and Duran-label developed by SCS is T a state-of-the-art data gathering and inspection system that combines sophisticated Interactive Identification (i) technology in a compact form factor. This unique synergy allows the S512 and Duran-label system to integrate seamlessly into and significantly increase productivity for —a wide range of applications and environments.
Introduction and the amount of interaction you have with the $512 and Epidurals, is determined by your application. For more information on i? technology, refer to “i2 Advantages,” below. i2 Advantages Conventional data-gathering systems such as bar code readers and Radio Frequency Identification products use one-way communication: A sensor reads information from a device, without any interaction between the two devices. Moreover, bar code systems are subject to line-of-sight limitations.
Instance Model S512 Scanner © Collective or selective data to be read from a single Durable. # Collective or selective data to be read from multiple Epidurals without requiring sorting or unpacking. Data to be written into 2 Duran-label.
a * Introduction are placed in various orientations. Figure 2 shows the two antenna S512, Figure 2.
Package Contents Package Contents The following items are included in your package: % > EEE IEE EE One Model S512 Scanner One or more external antenna(s) and matching number of RF cable(s) Wall mount Power Supple RS-232 serial cable A Diagnostic Label A diskette containing the 5512 configuration program This Operations Manual Please verify that you have received all of these items. If any item is missing or damaged, contact SCS as soon as possible.
T Introduction What Else You Need To complete your system, you need an IBM or compatible personal computer with the following minimum system requirements: “+ 486 processor Compatible screen and keyboard MS-DOS version 3.3 Windows DOS users: 8 MB of RAM Windows users: 8 MB of RAM (12 MB recommended) ¢ 9-pin RS-232 port and cable The applications you use to interface with your S512 and Durable system may have additional hardware and software requirements.
Summary of Chapters and Appendixes + Notes that require special attention are prefaced with an open hand Summary of Chapters and Appendixes Besides Chapter 1, this Operations Manual contains the following additional chapters and appendixes: & Chapter 2, Applications — describes various applications suited for the S512 and Duran-label system. «Chapter 3, Installation — describes how to install the $512 and Duran-label. #% Chaplet 4, RF Tips— provides information on radio frequency (RF) communications.
APPLICATIONS T= $512 and Duran-label system’s sophisticated data gathering and inspection capabilities, combined with its flexible design, make it 2 powerful solution for improved productivity and quality control. The ability to program data into and retrieve data from SCS Duran-labels makes the 5512 and Duran-label system ideal for portable database applications. SCS Duran-label technology prevents data from being accessed, modified, or deleted by unauthorized individuals.
Applications Alternatively, an institution may need to obtain information from only certain articles of clothing, such as: + Individual serial numbers. 4 The number of all size 12 shirts that have been laundered. 2 The number of times a shirt has been washed. 4 The name of the shirt manufacturer. <% The name of the person who wears the shirt. 4 A department budget number assigned to the shirt.
Applications Inventory Assessment The SCS $512 and Duran-labels are ideal for portable database applications involving inventory assessment. For example, a company shipping products to various distributors across the country may want an inventory of all items leaving the factory. Information such as model number, serial number, distributor name and location, and shipping date may need to be obtained before each product is loaded onto a truck for delivery to distributors.
Manufacturing Applications Manufacturing Applications Manufacturing environments frequently require information at various steps in a product's production cycle. For example, one step in the manufacturing process may require product assembly, serial number, and diagnostic information. A later step may require test results after an object has gone through various diagnostics, or a count of the number of times an operation has been performed.
INSTALLATION his chapter provides instructions for installing the S512 and Duran-label. $512 LED and Connectors The S512 provides the connectors and LED described in the following sections and shown in Figure 6.
Front Panel $512 LED and Connectors The S512 front panel has three LED and 4 coaxial RF connectors. The LED are used to indicate power, activity, and RF transmission. Table 1 describes the meanings of the $512 LED. Table 1. $512 LED Meanings LED Color Status Power Red ON = 5512 is turned on and ON receiving power from an AC outlet. Activity / Yellow Flicker = 5512 detects Error Duran-label information.
$512 LED and Connectors Rear Panel The S512 rear panel has an On/Off switch, a DC power connector, an RS-232 connector and a test connector. The On/Off switch controls power from the power supply to the scanner. 4 In the ON (up) position, the 5512 is turned on. The red Power ON LED should go ON, indicating that the 5512 is receiving power. 4 In the OFF (down) position, the $512 is turned off and not receiving power, even if connected to a power outlet.
Installation $512 Installation Steps The $512 installation consists of the following steps: 1. Position the S512 — locate near desired antenna locations, 2. Connect external antennas — see page 21. 3. Place the antenna for optimum read/write operation — see page 22. 4. Connect the S512 to a computer serial port — see page 23. 5. Power-up the S512 -— see page 24. 6. Configure the S512 — see page 25. 7. Align the S512 — see page 27.
$512 Installation Steps Connecting External Antennas The front panel of S512 has four coaxial antenna connectors. Each connector accommodates a single external antenna. Figure 7 shows the external antenna connections to the S512. % The four-antenna S512 can be used with either 2 or 4 antennas. Figure 7.
a» ¥ Installation Placing the Antenna Antenna placement is critical to ensuring that information is written to and read from Duran-labels accurately. Observe the following guidelines when placing the antenna: » Y% Locate the antenna away from metal objects, microwave ovens, and other devices that may induce radio frequency interference. In addition, make sure there are no metallic surfaces between, or in relative proximity to, the 5512 antenna and Duran-label.
$512 Installation Steps Connecting to a PC Serial Port The $512 has a 9-pin female (DB-9) RS-232 connector that connects to a serial port connector on an IBM or compatible personal computer. The serial port can operate up to 19,200 baud, To make this connection, you need: “% An appropriately configured serial cable. % One of the following adapters, if your computer's serial port does not have a 9-pin connector: =~ A15-pin to 9-pin adapter, if your computer has a 15-pin serial port connector.
Installation Figure 8. Connecting to a Computer Serial Port Connecting to an AC Outlet The following procedure describes how to connect the 5512 to an. AC outlet. 1. Verify that the On/Off switch on the S512 rear panel is in the OFF (down) position (see Figure 6). 2. Connect the power supply to the DC receptacle in the $512 rear panel. 3. Connect the other end of the power supply to the wall outlet. 4. Set the On/Off switch to the ON (up) position. The Power ON LED lights.
Installation 5. Type the following command and press Enter; CHE READ A running series of zeros appear on your computer screen: Place the supplied Diagnostic Label in front of the antenna. Do not place your finger over the Duran-label. The Activity/Error LED on the S512 flickers and the display changes to a running series of zeros and ones: 1 1 1 This indicates that the S512 is identifying Duran-labels correctly and is ready for operation.
8512 Installation Steps Aligning the $512 After verifying that the 5512 is operating properly, use the following procedure to align the 5512. Aligning the S512 ensures optimal read and write performance. 1. At the DOS prompt, type the following command and press Enter: CHE READ A running series of zeros appear on your computer screen. 2. Hold the supplied Diagnostic Label within the scanning area, at the point where you intend to scan. 3.
Installation Installing Duran-labels Duran-labels have a diminutive form factor that allows them to be installed in areas that cannot accommodate conventional read/write tags. In addition, Duran-labels can communicate with the 5512 without having to be in the line-of-sight. This unique combination provides tremendous flexibility when determining a location for placing Duran-labels.
KF Constrictions such as your S512 and Duran-label system, can be sensitive to signal interference and signal attenuation. This chapter provides tips for optimizing radio-frequency (RF) communications with your 5512 and Duran-labels. [ n general, devices that communicate using radio frequencies, Topics in this chapter include: “% Signal interference — see page 30. 4 Signal attenuation — see page 31, % Optimizing performance — see page 31.
.e RF Communications Signal Interference Signal interference is RF signals that interfere with the information being exchanged between the Duran-label and the 5512. Signal interference can severely diminish the 5512's ability to write information to and read it from Duran-labels.
Co Signal Attenuation/Reflections Signal Attenuation/Reflections Signal attenuation is the loss of signal strength that occurs naturally over distances, but which can also be caused by RF barriers in the signal path. Examples of such barriers include: # Enclosed locations that have concrete walls, floors, and ceilings. Metal surfaces surrounding the antenna or Duran-label. % Water or other fluids surrounding the antenna or Duran-label.
RF Communications % & The 5512 antenna should never be removed, altered, or modified except by an authorized technician. Any unauthorized termagant modifications can void your warranty. Consider the environment's RF characteristics, including construction materials, office plan (closed or open), and the presence of windows and ducting.
TROUBLESHOOTING use in the unlikely event you have a problem with your 5512 and Duran-label system. Customer Service information and merchandise return instructions are included in this chapter. T his chapter provides troubleshooting information you can Solving Problems The following table identifies S512 and Duran-label problems and provides suggestions for resolving the problem, Table 2.
Troubleshooting Problem Probable Cause Solution You receive an TheS512maynotbe Verify that the Power ON LED error message turned on. is lit. I£it is, proceed to the next when configuring row. Otherwise, make sure the the 5512. 5121st turned perform the steps in the first row of this table to make sure the AC outlet is working. The S512s serial port Verify the Serialization port connection to your connection. If you are using a computer may note serial part adapter, make sure secure.
Returning Your System Customer Service Representatives are available from 8:00 am to 5:30 pm, Pacific Standard Time, Monday through Friday. Please have the following information ready before you call Customer Service. 5512 Information: Computer Information: Application Software: System serial number, located on the back of the $512, Modifications made to the S512 and Durable system. Location where the 5512 and Duran-labels are installed. Computer brand and model. Processor speed and available RAM. COM Port.
Troubleshooting the box, so your return can be processed quickly. Return only your S512, antenna, cable, and adapter. Do not return accessories, such as the Diagnostic Label or the diskette containing the $512 configuration program. Follow these steps to return your S512 and accessories for service: 1. Carefully pack your S512 and accessories in the original static-protected bubble wrap and container.
SPECIFICATIONS This appendix lists the specifications for the $5512 and Duran-label system.
Limited Warranty SCS warrants its Duran-labels to be free from defects in workmanship and materials, under normal use and service, for a period of ninety (90) days from receipt of products.