iSM1060BT INSTRUCTION MANUAL www.singingmachine.com The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
Included Please make sure the following items are included.
Installation u v 1 Insert the pedestal into the stand u and then gently rotate clockwise v until tight, making sure the screw hole in the Pedestal aligns with the screw hole on the stand. 2 Insert and tighten one of the silver pedestal screws to secure the Pedestal to the stand (as shown). 3 Install the power cord clips into areas u and v and secure them using the two black clamp screws. Then align the power cord securely under the clamps.
Installation v 4 Insert the base into the pedestal u and then gently rotate clockwise v until the screw hole on the base aligns with the screw hole on the pedestal. 5 Insert and tighten the remaining silver pedestal screw to secure the base to the pedestal. 6 Insert the detachable mic holders u into the mic holder slots as illustrated.
Installation 7 —5— Place the tower speaker on to the speaker stand aligning the screw holes on both the speaker and stand, then insert and tighten the black screws through the bottom of the base.
Location of Controls (Top/Front) 1 2 3 4 5 19 20 6 7 8 9 10 11 12 13 14 21 22 23 15 24 25 17 18 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 26 TFT LCD Color Screen FUNCTION Button BLUETOOTH Pairing Button ON/OFF Button VOCAL Button MENU Button Navigation UP 5 Button ECHO + Button Navigation LEFT Button ENTER/ Button Navigation DOWN Button ECHO - Button Navigation RIGHT Button 14. RECORD n Button 15. MIC 1 Holder 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Location of Controls (Rear) 1 4 2 5 3 1. DC Jack 2. Right Tower Speaker Jack 3. Left Tower Speaker Jack 4. HDMI Jack 5.
Connection Connecting the Microphones and Headphones Microphones: Connect a microphone into Mic jack 1 u as well as Mic jack 2 v (when desired). Note: Do not drop or tap the Mic as damage to the Mic or speakers may occur. Do not twirl the microphone by cord as it will cause damage to the encased wiring. Headphones: For private listening, use headphones (not included). Install headphones into the headphone jack w. Note: The headphones must be disconnected for the speakers to produce sound.
Connection Connecting the Unit to a TV The video and lyrics will be displayed on the built-in screen. You may also want to connect a TV to display a larger image and additional sound; follow the steps below: Rear of External TV Rear of External TV HDMI Jack (Out) HDMI Jack (Out) HDMI Jack (In) HDMI Jack (In) HDMI IN HDMI IN 1 1 2 2 Plug the HDMI cable (not included) into the HDMI Jack on the back of the unit. Plug the other end of the HDMI cable into the HDMI input on your TV.
Karaoke Store PC Installation The Karaoke Store application can be installed on Microsoft Windows computers running Vista, Windows 7 and Windows 8 or higher. The Karaoke Store application requires connection to the Internet (a high-speed connection is recommended). 1 Insert the Singing Machine USB Flash Drive into a powered USB slot on your computer. 2 Double click the file named, “Karaoke_Store_Win_Setup”. 3 Follow the online instructions to install the software on your computer.
Karaoke Store Mac Installation The Karaoke Store application can be installed on Apple Macintosh computers running OS X 10.8 and higher. The Karaoke Store application requires connection to the Internet (a highspeed connection is recommended). 1 Insert the Singing Machine USB Flash Drive into a powered USB slot on your computer. 2 Double click the file named, “Karaoke_Store_Mac_Setup.pkg”. 3 Follow the online instructions to install the software on your computer.
Operation Playing Songs from the USB 2 1 Connect the unit as described previously. Press the ON/OFF button u to turn the unit on; the ON/OFF indicator will light blue. 2 Remove the provided Singing Machine flash drive from its stand to reveal the USB plug. Insert it into the USB slot on the unit so it faces towards the back of the unit. 2 Note: The Singing Machine flash drive has an 8GB capacity (the actual capacity may vary slightly).
Operation Playing Songs from the USB (Continued) 4 Use the Navigation up and down buttons to navigate through the list of songs in which you have previously downloaded into your USB. 5 Press the ENTER button to start the playback. The HD karaoke video will play on the screen. Press the button during playback ENTER to pause the song. Press the MENU button to stop the playback and go back to the USB menu. 6 Adjust the volume to a comfortable level using the MASTER VOLUME control.
Operation Playing Songs from the USB (Continued) 10 LEAD VOCAL: To sing with the lead singer on the recording press the VOCAL button; “ ” will appear at the top right of the monitor). To listen to music only, press the VOCAL button again; “ ” will appear over the Lead Vocal Status icon. Note: The song must be recorded with separate vocals in order to utilize the Lead Vocal function. 11 SKIP: Advance or go back one track by pressing the Navigation right or left button.
Operation Playing Songs from the USB (Continued) 13 RECORDING YOUR SINGING: To record your singing as well as the music, press the RECORD button; recording will begin and the record icon at the top right corner of the monitor which will display red. When done recording, press the RECORD button again; the Record icon will stop blinking red. Notes: • The recorded audio file will be named starting with the Karaoke song title. • See page 23 to play back your recorded files.
Operation Playing Songs from the USB (Continued) 15 SEARCHING BY GENRE, ARTIST or TITLE: To filter by Genre, Artist or Title, select the Genre, Artist, or Title using the Navigation left and right buttons, then press the button. The alphabet ENTER will appear at he bottom of the screen; select the desired starting letter using the MASTER VOLUME control, then press the ENTER button to select it. A list of songs that meet the criteria will appear.
Operation Playing Songs from the USB (Continued) 17 USING THE PLAYLIST: To play your previously created playlist, select Playlist using the Navigation right and left buttons, then press the ENTER button; the row under Playlist will be highlighted. Select the desired selection using the Navigation right and left buttons as follows: TO PLAY ALL: Select Play All and then button to play press the ENTER back all of the Playlist songs. (See below to add favorites.) PRIORITY: a.
Operation Playing Songs from the USB (Continued) 18 20 20 CREATING FAVORITES: To create a favorite playlist, select a song using the Navigation up and down buttons then scroll to the Favorite column using the Navigation right or left button. Press the ENTER button to confirm the operation; the icon will turn from gray to blue. Repeat this step to add more songs.
Operation Using a Bluetooth Device 1 Connect the unit as described previously. Press the ON/OFF button u to turn the unit on; the ON/OFF indicator will light blue. 2 Press the Navigation right or left button to select the Bluetooth mode. button; a tone Press the ENTER will sound. The unit will automatically search for and pair to a previously paired Bluetooth device (if previously paired). If no previously paired devices are present, “Please connect your Music Device” will appear in the display.
Operation Using a Bluetooth Device (Continued) 10 5 You can control your Bluetooth device to start the music playback OR button to start press the ENTER playback. Press the ENTER button during playback to pause the song. 6 Adjust the volume to a comfortable level using the MASTER VOLUME control on this unit as well as the Volume on your Bluetooth device. Note: If connected to a TV, the Volume control on the TV will not adjust the volume on your Singing Machine.
Operation Using a Bluetooth Device (Continued) 11 RECORD YOUR VOCAL PERFORMANCE: To record your singing as well as the music, press the RECORD button. Recording will begin and the record icon at the bottom right of the monitor will blink red and blue. When done recording, press the RECORD button again; the Record icon will stop blinking. Notes: 12 12 • The recorded audio file will be named with the “BT” prefix. • See page 23 to play back your recorded files.
Operation Playing Songs from the Recorded Files 1 Connect the unit as described previously. Press the ON/OFF button u to turn the unit on; the ON/OFF indicator v will light blue. 2 Press the Navigation right or left button to select the Recordings mode button to and press the ENTER continue. Notes: • A loading icon will appear when the system is loading the files.
Operation Playing Songs from the Recorded Files (Continued) 6 6 Connect the microphone(s) as shown on page 8. Slide the Mic’s Power switch to the ON position 7 Adjust the MIC VOLUME 1 or 2 control as desired. Increasing this will increase the volume of the respective microphone. 8 Press ECHO +/- buttons to add an echo effect to your voice. The higher the number, the more echo effect.
Operation Using the LINE IN Jack 1 Connect the unit as described previously. Press the ON/OFF button u to turn the unit on; the ON/OFF indicator will light blue. 2 Connect the external unit to the LINE IN Jack on the rear of this unit. Connecting an external unit will allow the audio and video to be played through your Singing Machine. Notes: • It is highly recommended to set the volume on the auxiliary unit to 1/3 or lower to avoid distortion.
Operation Using the LINE IN Jack (Continued) 6 Adjust the MIC VOLUME 1 or 2 control as desired. Increasing this control will increase the volume of the respective microphone. 7 Press ECHO +/- buttons to add an echo effect to your voice. The higher the number, the more echo effect. 8 RECORDING YOUR SINGING: To record your singing as well as the music, press the RECORD button; recording will begin and the record icon at the bottom right of the display will blink red and blue.
Troubleshooting Guide Should this unit exhibit a problem, check the following before seeking service: No Power • Power is not on; press the ON/OFF button to turn power on. • Confirm that the AC adaptor is connected securely to the back of the unit. • Connect the unit to a different outlet. No Sound – General • Master Volume is set to minimum; raise volume. • Correct Function was not selected; select using the Function buttons. • The Tower speakers are not connected.
Updating the Firmware Make sure the Singing Machine USB Flash Drive, is securely plugged into the USB slot before running the update. DO NOT interrupt the update. If interrupted during the update process; the software can become corrupted and the unit will no longer function properly. 1. Create a folder on the Singing Machine USB Flash Drive named “user_updata” 2. Download the latest software (e.g xxxxxx.img) from www.singingmachine.com/ softwareupdates and save it into this folder. 3.
Specifications AUDIO Output Power.................................................................................................................... 8 Watts (RMS) Output Impedance.........................................................................................................................3 Ohms BLUETOOTH Bluetooth Version....................................................................................................................V2.1 + EDR Working Distance..................................
Visit Our Website: www.singingmachine.com The Singing Machine Company, Inc.