Instructions / Assembly

A21 Angle
FOR MAXIMUM DURABILITY
© 2013 Simpson Strong-Tie Company Inc. DIY-CSOUTSTR13 3/13 exp. 12/16
ORGANIZE YOUR OUTDOOR TOOLS AND SUPPLIES
TOOLS YOU NEED
• Saw
• Screw gun
• #2 Phillips head bit
• ¼" hex drive socket
• Tape measure
• Clamps
• Framing square
• Hammer
• Straight edge
Need extra storage for your lawn mower or gardening tools and supplies? With Simpson Strong-Tie
®
connectors, it’s easy for you to get all of your outdoor goods organized. This sturdy storage center can
be completed, from start to nish, in just one day.
Outdoor Storage Center
Rigid Tie™ RTC24 connector
Rigid Tie™ RTA2 connector
A21 angle H1 rafter tieTP35 tie plate
FB24 bracket
For more inspiration visit www.strongtie.com/diydoneright
2x4 LUMBER
5
⁄8" PLYWOOD ROOF
Install Rigid Tie™
RTC24 connectors
½" below top of
post
A21 ANGLE
1. CUT LUMBER AND
PLYWOOD TO SIZE.
Since all of your cuts are straight
cuts, Simpson Strong-Tie
®
connectors
simplify building with wood.
2. INSTALL CONNECTOR
ON VERTICAL POST.
Mark height, clamp connector to post
and attach
with Simpson
Strong-Tie
®
Strong-Drive
®
SD #9x1½"
screws.
3. CONNECT HORIZONTAL
RAIL ON EACH SIDE.
Use a clamp to
help hold the
wood in the seat
of the connector
during installation.
4. NOTCH CORNERS OF
PLYWOOD SHELVES.
Use a piece of 2x4 on each corner of
the shelf, trace
and cut to
accommodate
corner posts.
Connectors are easy to install and
strong enough to support even the
heaviest boxes, tools or machinery,
and can be nished with paint to
blend with the style of your home.
RIGID TIE
™
RTC24 CONNECTOR
INSTALLATION INSTRUCTIONS
5
⁄8" PLYWOOD
SHELF
H2.5A tie A21 angle