Installation Guide

Installation Instructions
Disconnect power during installation and before servicing. Wear gloves to prevent
cuts/abrasions from sharp edges when removing from carton, handling, and
WARNING:
If you are unfamiliar with proper electrical wiring connections,obtain the services of
To insure personal safety, proper grounding is required (conne
supply ground).
SAFETY:
Read all instructions carefully before attempting installation.
IMPORTANT:
TOOLS REQUIRED:
Phillips
Screwdriver
Ladder
Safely
Goggles
ric Code and applicable
local codes or ordinances.
1
2
3
4
5
13
7
8
9
10
11
12
M4*14 machine tapping screw
Outlet box
House ground wire
Black supply wire
P3 wire nut
Black fixture wire
Mounting bracket
Grounding screw
Fixture
White supply wire
White fixture wire
8-32*15 machine tapping screw
PARTS LIST:
e sure that no
parts are missing by referencing the illustrations on the installation instruction.
7020022592 AM_L15-MWP-40-120-PC_4000K_说明书A2
285*210MM
Installation steps:
1. Pull out three power supply wires (#2#3#11) from the outlet box (#1), and thread the
wires through the hole in the mounting bracket (#7).
2. Install the mounting bracket (#7) on the outlet box (#1) by 8-32*15 machine tapping
screw (#13).
3. Make wiring connections with wire nuts provided (#4).
4. Put all three pairs of connected wires into the outlet box (#1).
(#10).
3.54’’
7.67’’
11.41’’
Product size:
Unit: inch
AM Conserva�on Group, Inc. 1701 Charleston Regional Parkway, Suite A Charleston, SC 29492 P: [phone] customercare@amconserva�ongroup.com
Pull the ground wire (#2)
out of the outlet box, feed through the mounting bracket (#7)
and secure it around the ground screw (#8).
If house wiring includes no ground wire, consult electrician.