50262758 ISOFIX Base. User Guide ECE R44/04 ISOFIX Class E Group 0+ Up to 13kg Language: English simpleparenting.co info@simpleparenting.
4 Table of contents. 01/ Vital information / Warnings ..............................................................7 02/ Suitability ...........................................................................................10 03/ Product overview .............................................................................11 04/ Use in the vehicle .............................................................................12 05/ Installing the Doona ISOFIX Base in the vehicle ...........................
5 6.1. Securing the Doona Car Seat on the Doona ISOFIX Base ........................................................................................20 6.2 Removing the Doona Car Seat from the Doona ISOFIX Base ........................................................................................23 07/ Car fitting List .....................................................................................25 08/ Care instructions ...............................................................................
6 Congratulations on choosing Simple Parenting’s Doona as your baby’s safety and mobility solution. In order to protect your baby, and allow easy use of the Doona inside and outside of the car, the Doona ISOFIX Base must always be used and installed as described in these instructions. Important – Keep these instructions for future reference. Read these instructions carefully, your child’s safety may be affected if you do not follow these instructions.
7 0 1 / Vital information / warnings. WARNING! Read this user guide carefully and save it for future reference. Failure to follow the instructions in the guide could result in serious injury to your child. WARNING! Use original accessories and manufacturer approved parts only. Do not make any alterations or additions to the Doona ISOFIX Base. WARNING! Always check car fitting list before installation. WARNING! In a case of a car accident violent stresses occur.
8 WARNING! Do not use this product if any components are broken or missing. WARNING! Any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured. The Doona ISOFIX Base must always be secured with the support leg, even when not in use. WARNING! Never leave your child unattended in the Doona Car Seat, both inside and outside of the car.
9 WARNING! Do not use the Doona ISOFIX Base in seating positions where there is an airbag installed. WARNING! It is recommended to cover up the Doona ISOFIX Base when the car is parked in the sun, as plastic and metal parts may become extremely hot.
10 0 2 / Suitability. The Doona ISOFIX Base is compatible with the Doona Car Seat, and is intended for Rear-Facing use only. Group: 0+ Weight: Up to 13 kg Safety Information: WARNING! Do not use the Doona ISOFIX Base in seating positions where there is an airbag installed. NOTICE • This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04 series of amendments for general use in vehicles fitted with ISOFIX anchorage systems.
11 0 3 / Product overview.
12 0 4 / Use in the vehicle. E Please observe the instructions on the use of child restraint systems and ISOFIX Bases described in your vehicle owner’s manual. DO NOT use on a passenger seat with a front airbag! For seats with side airbags, please observe the instructions in your vehicle owner’s manual. The Doona ISOFIX Base may be used only on a forward facing seat equipped with ISOFIX anchor points. Either on the passenger seat or on the back seat, but it should always face backwards.
13 Never use a different installation method other than the one described in the User Guide. The Doona ISOFIX Base is approved for use with the Doona Car Seat. The Doona ISOFIX Base is compatible for use in cars with approved ISOFIX anchor points (See chapter 7 for Car fitting list). If your car is equipped with ISOFIX anchor points, you can install the Doona ISOFIX Base using the ISOFIX connectors in combination with the support leg.
14 WARNING! In an accident, enormous forces occur. Never try to secure a child on your lap with the vehicle seat belt or by holding onto them. WARNING! An airbag hitting the Doona Car Seat can cause serious injuries to your child, possibly resulting in death. This manual includes detailed instructions only regarding installation with a base. For detailed instructions regarding the use with a vehicle 3-point belt without a base, refer to the user guide provided with the Doona Car Seat.
15 0 5 / Installing the Doona ISOFIX Base in the vehicle. 5.1. Securing the Doona ISOFIX Base in your vehicle E To secure the Doona ISOFIX Base in your vehicle, proceed as follows: Note: Installation of the Doona ISOFIX Base in the front seat of the vehicle is not recommended, yet possible (subject to the existence of ISOFIX anchors in the front seat). Should you decide to install your Doona ISOFIX Base in the front, make sure to disable the Airbag system. IMPORTANT! Secure any fold down seats.
16 Step 1: Unfold the support leg (#10) Step 2: Make sure the ISOFIX Connectors (#5) are sticking out to the maximum from the Doona ISOFIX main body. In case they are not, lift the body slider button (#2) with one hand, and push the support leg with the other hand towards the body until the ISOFIX Connectors (#5) are exposed and reach maximum length. Step 3: Place the Doona ISOFIX Base with the ISOFIX Connectors (#5) facing the back of the vehicle›s seat.
17 1. 3. 2. 4. 5.
18 5.2. Removing the Doona ISOFIX Base from your vehicle Step 1: Make sure the Doona Infant Car Seat is not connected to the ISOFIX Base. In case it is connected, please remove it first. Detailed description for removing the Doona Infant Car Seat from the ISOFIX Base can be found in chapter 6.2. Step 2: Pull the ISOFIX release button (#6) on each side of the Doona ISOFIX Base, and pull the ISOFIX Base body away from the vehicle’s ISOFIX low anchors, until the Doona ISOFIX Base is completely disconnected.
19 2. 3.
20 0 6 / Installing and removing of the Doona Car Seat from the Doona ISOFIX Base. 6.1. Securing the Doona Car Seat on the Doona ISOFIX Base After securing the Doona ISOFIX Base in your vehicle (See chapter 5 for instructions), you may now easily connect and remove the Doona Car Seat from your vehicle.
21 Step 1: When the Doona is in car seat mode (wheels are folded), and the handle is in its upright position B, place the Doona Car Seat facing the back of the vehicle (opposite the driving direction). Note: For further information about folding the Doona Car Seat and adjusting the handle, please refer to the Doona Car Seat User Guide. Step 2: Position the Doona Car Seat and align its 2 metal bars (See image below) above the Doona anchor points (#1) in the Doona ISOFIX Base.
22 2. 3. 4. 5.
23 6.2. Removing the Doona Car Seat from the Doona ISOFIX Base Step 1: Rotate the Doona Car Seat handle from position C to upright position B. Step 2: Hold the Doona Car Seat handle with one hand, and press the Doona release button (#3) with the other hand. You should press down the small top button, and while it is pressed down push the entire Doona release button (#3) for- ward until it clicks in place and the Doona color indicator (#4) turns red.
24 2. I II 3.
25 0 7/ Car fitting list. To obtain further information on fitting the Doona ISOFIX Base in specific cars, please contact us at: info@simpleparenting.co or visit our website: www.simpleparenting.
26 0 8 / Care instructions. ASSURING PROPER FUNCTION • In an accident, at a collision speed above 10 km/h, the Doona ISOFIX Base could suffer damage which is not necessarily visible. In this case, the ISOFIX Base must be replaced. Please dispose of it properly. • Regularly check all important parts for damage. Ensure the correct operation of all mechanical components. • Should the Doona ISOFIX Base be damaged (for example after dropping it) it must be inspected.
27 0 9/ Two-year warranty. We guarantee that the Doona ISOFIX Base was manufactured in accordance with the European safety standards and regulations, and it meets the highest standards of quality. For the Doona ISOFIX Base we provide a 2-year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase. As proof of purchase we ask that you fill out the Warranty Card and retain it for the whole term of the warranty period, together with your sales receipt.
28 • When the product has been used for a purpose other than that specified in this user manual. In the event of a warranty claim, please contact us directly at: info@simpleparenting.
29 1 0/ Warranty card. Warranty card: Name: Address: Post code: City/Town: State: Country: Telephone no. (including area code): E-mail address: Doona ISOFIX Base serial no.
simpleparenting.co info@simpleparenting.