SIM7600G-H,SIM7600G-H miniPCIE User manual LTE/HSPA/GSM/GNSS MODULE SIMCom Wireless Solutions Limited Building B, SIM Technology Building, No.633, Jinzhong Road Changning District, Shanghai P.R. China Tel: 86-21-31575100 support@simcom.com www.simcom.
SIM7600G-H User manual Document Title: Version: Date: Status: Document Control ID: SIM7600G-H User manual V1.03 2020-05-09 Released SIM7600G-H User manual GENERAL NOTES SIMCOM OFFERS THIS INFORMATION AS A SERVICE TO ITS CUSTOMERS, TO SUPPORT APPLICATION AND ENGINEERING EFFORTS THAT USE THE PRODUCTS DESIGNED BY SIMCOM. THE INFORMATION PROVIDED IS BASED UPON REQUIREMENTS SPECIFICALLY PROVIDED TO SIMCOM BY THE CUSTOMERS.
SIM7600G-H User manual For a host manufacture’s using a certified modular, if (1) the module’s IC number is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the IC number of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module IC: 23761-8PYA008” or “Contains IC: 23761-8PYA008” must be used.
SIM7600G-H User manual environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.
SIM7600G-H User manual For more information, please visit: https://www.simcom.com/download/list-863-en.html For technical support, or to report documentation errors, please visit: https://www.simcom.com/ask/ or email to: support@simcom.com importer information: importer Name：XXXX importer Address:XXXX Copyright © 2020 SIMCom Wireless Solutions Limited All Rights Reserved. www.simcom.
SIM7600G-H User manual Version History Date Version Description of change Author 2019-3-29 1.00 Original Xutao.Jiang 2019-10-21 1.01 Update current consumption Xutao.Jiang 2020-04-22 1.02 2020-05-09 1.03 Modify the Format Add Sim7600NA/NA-H frequency band Change Table 2 Xiong Yuqing Xutao.Jiang Qiang.Zhang www.simcom.
SIM7600G-H User manual Contents Version History.................................................................................................................................................... 6 Contents................................................................................................................................................................ 7 Table Index...................................................................................................................................
SIM7600G-H User manual 3.12 SPI Interface................................................................................................................................................. 48 3.13 Network status.............................................................................................................................................. 49 3.14 Flight Mode Control.....................................................................................................................................
SIM7600G-H User manual Table Index TABLE1 : MODULE FREQUENCY BANDS............................................................................................................. 13 TABLE2 : GENERAL FEATURES.............................................................................................................................. 15 TABLE3 : PIN DEFINITION.........................................................................................................................................
SIM7600G-H User manual TABLE 39 : MOISTURE SENSITIVITY LEVEL AND FLOOR LIFE..................................................................... 66 TABLE 40 : TRAY SIZE................................................................................................................................................ 68 TABLE 41 : SMALL CARTON SIZE........................................................................................................................... 69 TABLE 42 : BIG CARTON SIZE...............
SIM7600G-H User manual Figure Index FIGURE 2 : PIN ASSIGNMENT OVERVIEW...........................................................................................................17 FIGURE 3 : DIMENSIONS (UNIT: MM).....................................................................................................................24 FIGURE 4 : FOOTPRINT RECOMMENDATION (UNIT: MM)...............................................................................
SIM7600G-H User manual FIGURE 43 : PACKAGING DIAGRAM......................................................................................................................68 FIGURE 44 : TRAY DRAWING...................................................................................................................................68 FIGURE 45 : SMALL CARTON DRAWING.............................................................................................................. 69 FIGURE 46 : BIG CARTON DRAWING.....
SIM7600G-H User manual 1 Introduction This document describes the electronic specifications, RF specifications, interfaces, mechanical characteristics and testing results of the SIMCom module. With the help of this document and other software application notes/user guides, users can understand and use module to design and develop applications quickly. 1.1 Product Outline Aimed at the global market, the module support GSM, WCDMA, LTE-TDD and LTE-FDD.
SIM7600G-H User manual FDD B14 √ √ FDD B18 FDD B19 FDD B20 FDD B25 √ √ √ √ FDD B26 √ √ √ √ √ √ √ √ √ √ FDD B28 FDD B66 FDD B71 TDD B34 TDD B38 TDD B39 TDD B40 TDD B41 Category √ √ √ √ CAT1 CAT4 CAT1 CAT4 With a small physical dimension of 30*30*2.9 mm and with the functions integrated, the module can meet almost any space requirement in users’ applications, such as smart phone, PDA, industrial handhold, machine-to-machine and vehicle application, etc. 1.
SIM7600G-H User manual 1.3 Functional Overview Table2: General features Feature Implementation Power supply Single supply voltage 3.4～4.2V, Recommend supply voltage 3.8V Power saving Current in sleep mode : <5mA Radio frequency bands Please refer to the table 1 Transmitting power LTE power class: 3 (24+1/-2dBm) Data Transmission Throughput LTE CAT 4 :150 Mbps (DL) 50 Mbps (UL) Antenna LTE main antenna.
SIM7600G-H User manual max. output power LTE Band 2: 23.20 dBm LTE Band 4: 23.67 dBm LTE Band 5: 25.30 dBm LTE Band 12: 24.35 dBm LTE Band 13: 22.06 dBm LTE Band 25: 23.46 dBm LTE Band 26: 24.16 dBm LTE Band 41: 23.16 dBm LTE Band 66: 23.
SIM7600G-H User manual 2 Package Information 2.1 Pin Assignment Overview All functions of the MODULE will be provided through 135 pads that will be connected to the users’ platform. The following Figure is a high-level view of the pin assignment of the MODULE. Figure 2: Pin assignment overview www.simcom.
SIM7600G-H User manual Table3: Pin definition Pin No. Pin name Pin No.
SIM7600G-H User manual 77 GND 78 GND 79 GNSS_ANT 80 GND 81 GND 82 MAIN_ANT 83 COEX1●* 84 COEX2* 85 BOOT_CFG0●* 86 COEX3●* 87 GPIO77 88 RESERVED 89 RESERVED 90 RESERVED 91 RESERVED 92 RESERVED 93 GND 94 GPIO4 95 GPIO2 96 GPIO1 97 GPIO_54 98 GND 99 RESERVED 100 RESERVED 101 RESERVED 102 RESERVED 103 RESERVED 104 RESERVED 105 RESERVED 106 DBG_ RXD 107 RESERVED 108 SGMII_RST_N 109 SGMII_INT_N 110 GND 111 RESERVED 112 SGMII_RX_P 113 SGMII_R
SIM7600G-H User manual 2.2 Pin Description Table 4: IO parameters definition Pin type Description PI Power input PO Power output AI Analog input AIO Analog input/output I/O Bidirectional input /output DI Digital input DO Digital output DOH Digital output with high level DOL Digital output with low level PU Pull up PD Pull down Table 5: Pin description Pin name Pin No.
SIM7600G-H User manual 34135 System Control PWRKEY 3 DI,PU System power on/off control input, active low. RESET 4 DI, PU System reset control input, active low. SD_CMD 21 I/O,PD SDIO command SD_DATA0 22 I/O,PD SD_DATA1 23 I/O,PD SD_DATA2 24 I/O,PD SD_DATA3 25 I/O,PD SD_CLK 26 DO SD_DET 48 DI,PU The high voltage is 0.8V; RESET has been pulled up to 1.8V via 40Kohm resistor internally. SD interface SDIO data If unused, keep them open.
SIM7600G-H User manual SGMII_TX_P 115 AO SGMII transmit– positive SGMII_RST_N 108 DO Ethernet PHY reset SGMII_INT_N 109 DI,PU SGMII_MDIO 116 DIO Ethernet PHY interrupt Management data input/output-data SGMII_MDC 117 DO Management data input/output-clock RTS 66 DOH Request to send CTS 67 DI Clear to Send RXD 68 DI Receive Data RI 69 DOH Ring Indicator DCD 70 DOH Carrier detects TXD 71 DOH Transmit Data DTR 72 DI,PU DTE get ready DBG_TXD 42 DO Log output DBG_
SIM7600G-H User manual PCM_CLK 76 I/O,PU PCM data bit clock. NETLIGHT 51 DO,PU STATUS 49 DO,PU GPIO4 94 IO,PD LED control output as network status indication. Operating status output.
SIM7600G-H User manual GPIO6* USIM_DET* 34 53 IO GPIO IO Default: GPIO Optional: USIM card detecting input. H: USIM is removed L: USIM is inserted GPIO77* 87 IO GPIO GPIO43* 50 I/O,PD GPIO GPIO41* 52 I/O,PD GPIO Default:GPIO6* Option:WL_SLP_CL K● Default:USIM_DET* Option:BT_EN● Default:GPIO77* Option:BT_PCM_OU T● Default:GPIO43* Option:COEX_TXD● Default:GPIO41* Option:BT_PCM_SY NC● 2.3 Mechanical Information The following figure shows the package outline drawing of MODULE.
SIM7600G-H User manual 2.4 Footprint Recommendation Figure 4: Footprint recommendation (Unit: mm) www.simcom.
SIM7600G-H User manual 3 Interface Application 3.1 Power Supply The power supply pins of MODULE include 4 pins (pin 62&63, pin 38&39) named VBAT. The 4 VBAT pads supply the power to RF and baseband circuits directly. On VBAT pads, the ripple current up to 2A typically, due to GSM/GPRS emission burst (every 4.615ms), may cause voltage drop. So the power supply for these pads must be able to provide sufficient current up to more than 2A in order to avoid the voltage drop is more than 300mV.
SIM7600G-H User manual 3.1.1 Power Supply Design Guide Make sure that the voltage on the VBAT pins will never drop below 3.4V, even during a transmit burst, when current consumption may rise up to 2A. If the voltage drops below 3.4V, the RF performance may be affected. NOTE If the power supply for VBAT pins can support up to 2A, more than 300uF capacitors are recommended .Otherwise users must use a total of 1000uF capacitors typically, in order to avoid of the voltage drop more than 300mV.
SIM7600G-H User manual Table 7: Recommended TVS list No. Manufacturer Part Number Power dissipation Package 1 JCET ESDBW5V0A1 5V DFN1006-2L 2 WAYON WS05DPF-B 5V DFN1006-2L 3 WILLSEMI ESD5611N 5V DFN1006-2L 4 WILLSEMI ESD56151W05 5V SOD-323 5* PRISEMI PESDHC2FD4V5BH 4.5V DFN1006-2L 6* WAYON WS4.5DPV 4.5V DFN1610-2L NOTE If user chooses TVS, please pay attention to Clamping Voltage in your datasheet .
SIM7600G-H User manual extremely important, then a switching mode power supply will be preferable. The following figure shows the switching mode power supply reference circuit. Figure 8: Switching mode power supply reference circuit NOTE The Switching Mode power supply solution for VBAT must be chosen carefully against Electro Magnetic Interference and ripple current from depraving RF performance. 3.1.3 Voltage Monitor To monitor the VBAT voltage, the AT command “AT+CBC” can be used.
SIM7600G-H User manual 3.2 Power on/Power off/Reset Function 3.2.1 Power on MODULE can be powered on by pulling the PWRKEY pin down to ground. The PWRKEY pin has been pulled up with a diode to 1.8V internally, so it does not need to be pulled up externally. It is strongly recommended to put a100nF capacitor, an ESD protection diode, close to the PWRKEY pin as it would strongly enhance the ESD performance of PWRKEY pin. Please refer to the following figure for the recommended reference circuit.
SIM7600G-H User manual Figure 10: Power on timing sequence Table 8: Power on timing and electronic characteristic Symbol Parameter Min. Typ.
SIM7600G-H User manual If the temperature is outside the range of -30~+80℃, some warning will be reported via AT port. If the temperature is outside the range of -40~+85℃, MODULE will be powered off automatically. For details about “AT+CPOF” and “AT+CPMVT”, please refer to Document [1]. These procedures will make MODULE disconnect from the network and allow the software to enter a safe state, and save data before MODULE be powered off completely.
SIM7600G-H User manual been powered on and firmware goes ready, STATUS will be high level, or else STATUS will still low level. 3.2.3 Reset Function MODULE can be reset by pulling the RESET pin down to ground. NOTE This function is only used as an emergency reset, when AT command “AT+CPOF” and the PWRKEY pin all have lost efficacy. The RESET pin has been pulled up with a 40KΩ resistor to 1.8V internally, so it does not need to be pulled up externally.
SIM7600G-H User manual VIL Input low level voltage -0.3 0 0.8 V 3.3 UART Interface MODULE provides a 7-wire UART (universal asynchronous serial transmission) interface as DCE (Data Communication Equipment). AT commands and data transmission can be performed through UART interface. 3.3.1 UART Design Guide The following figures show the reference design. Figure 13: UART full modem Figure 14: UART null modem www.simcom.
SIM7600G-H User manual The MODULE UART is 1.8V voltage interface. If user’s UART application circuit is 3.3V voltage interface, the level shifter circuits should be used for voltage matching. The TXB0108RGYR provided by Texas Instruments is recommended. The following figure shows the voltage matching reference design.
SIM7600G-H User manual NOTE User needs to use high speed transistors such as MMBT3904. NOTE MODULE supports the following baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600, 3200000, 3686400, 4000000bps. The default band rate is 115200bps. 3.3.2 RI and DTR Behavior The RI pin can be used to interrupt output signal to inform the host controller such as application CPU.
SIM7600G-H User manual NOTE For more details of AT commands about UART, please refer to document [1] and [22]. DTR pin can be used to wake MODULE from sleep. When MODULE enters sleep mode, pulling down DTR can wake MODULE. 3.4 USB Interface The MODULE contains a USB interface compliant with the USB2.0 specification as a peripheral, but the USB charging function is not supported. MODULE can be used as a USB device. MODULE supports the USB suspend and resume mechanism which can reduce power consumption.
SIM7600G-H User manual NOTE The USB_DN and USB_DP nets must be traced by 90Ohm+/-10% differential impedance. SIMcom recommend add USB test pads on customer’s EVB board for Product Debug. 3.5 HSIC interface HSIC is a 2-signal source synchronous serial interface which uses 240MHz DDR signaling to provide High-Speed 480Mbps USB transfers which are 100% host driver compatible with traditional USB cable-connected topologies.
SIM7600G-H User manual 3.6 SGMII Interface MODULE provides a SGMII interface with an Ethernet MAC embedded, users could add a PHY to connect to the Ethernet, and the PHY device could be controlled by the MDIO interface and other dedicated signals. Two Ethernet PHY are supported: AR8031/AR8033 (Qualcomm) and BCM89820 (Broadcom). The AR8031/AR8033 is used for the industrial field and the BCM89820 is dedicated for the automotive field. Main features of SGMII: Ethernet Mac integrated in the module IEEE 802.
SIM7600G-H User manual 3.6.2 Reference schematic with BCM89820 Figure 21: Reference SGMII circuit with BCM89820 NOTE The module SGMII function default closed. If user need, please contact SIMCom for more details or refer to document [28] 3.7 USIM Interface MODULE supports both 1.8V and 3.0V USIM Cards. Table 12: USIM electronic characteristic in 1.8V mode (USIM_VDD=1.8V) Symbol Parameter Min. Typ. Max. Unit USIM_V DD LDO power output voltage 1.75 1.8 1.95 V VIH High-level input voltage 0.
SIM7600G-H User manual Table 13: USIM electronic characteristic 3.0V mode (USIM_VDD=2.95V) Symbol Parameter Min. Typ. Max. Unit USIM_V DD LDO power output voltage 2.75 2.95 3.05 V VIH High-level input voltage 0.65*USIM_VDD - USIM_VDD +0.3 V VIL Low-level input voltage -0.3 0 0.25*USIM_VDD V VOH High-level output voltage USIM_VDD -0.45 - USIM_VDD V VOL Low-level output voltage 0 0 0.45 V 3.7.
SIM7600G-H User manual Figure 23: USIM interface reference circuit with USIM_DET If the USIM card detection function is not used, user can keep the USIM_DET pin open. SIM card circuit is susceptible, the interference may cause the SIM card failures or some other situations, so it is strongly recommended to follow these guidelines while designing: Make sure that the SIM card holder should be far away from the antenna while in PCB layout.
SIM7600G-H User manual Figure 24: Amphenol SIM card socket Table 14: Amphenol USIM socket pin description Pin Signal Description C1 USIM_VDD USIM Card Power supply. C2 USIM_RST USIM Card Reset. C3 USIM_CLK USIM Card Clock. C5 GND Connect to GND. C6 VPP NC C7 USIM_DATA USIM Card data I/O. 3.8 PCM Interface MODULE provides a PCM interface for external codec, which can be used in master mode with short sync and 16 bits linear format.
SIM7600G-H User manual Figure 25: PCM_SYNC timing Figure 26: EXT codec to MODULE timing Figure 27: Module to EXT codec timing Table 16: PCM timing parameters Parameter Description Min. Typ. Max. Unit T(sync) PCM_SYNC cycle time – 125 – μs T(synch) PCM_SYNC high level time – 488 – ns T(syncl) PCM_SYNC low level time – 124.
SIM7600G-H User manual T(zdout) Delay from PCM_CLK falling to PCM_OUT – HIGH-Z 160 - ns 3.8.2 PCM Application Guide The following figure shows the external codec reference design. Figure 28: Audio codec reference circuit 3.9 SD Interface MODULE provides a 4-bit SD/MMC/eMMC interface with clock rate up to 200 MHz. When connected to a SD or MMC card, the voltage of SD interface is 1.8/2.85V, which is compatible with Secure Digital Physical Layer Specification version 3.
SIM7600G-H User manual Table 18: SD/MMC/eMMC electronic characteristic as 1.8V (SD_DATA0-3，SD_CLK and SD_CMD) Symbol Parameter Min. Typ. Max. Unit VIH High-level input voltage 0.7*1.8 - 1.8+0.2 V VIL Low-level input voltage -0.3 0 0.3*1.8 V VOH High-level output voltage 1.8-0.4 1.8 1.8 V VOL Low-level output voltage 0 0 0.45 V Users should provide 2.85V to power SD card system and the current should more than 350mA, which is showed below as VCC_SD.
SIM7600G-H User manual Figure 30: eMMC reference circuit NOTE For the current of VCC_eMMC and VCCQ_1V8, users should better refer to the related datasheet of eMMC which is used. The listed current of 500mA and 300mA are just for your reference. SD/MMC/eMMC card layout guide lines: ● ● ● ● ● ● Protect SD card signals from noisy signals (clocks, SMPS, etc.).
SIM7600G-H User manual Figure 31: I2C reference circuit NOTE SDA and SCL do not have pull-up resistors in MODULE. So, 2 external pull up resistors are needed in application circuit. “AT+CRIIC and AT+CWIIC” AT commands could be used to read/write register values of the I2C peripheral devices. For more details about AT commands please refer to document [1]. 3.11 SDIO Interface MODULE provides a 4 bit 1.8V SDIO interface for WLAN solution with W58 module. The SDIO interface can be used for WLAN solution.
SIM7600G-H User manual link with peripheral devices. Its operation voltage is 1.8V, with clock rates up to 50 MHz NOTE For more details of the AT commands about the SPI, please refer to document [1]. 3.13 Network status The NETLIGHT pin is used to control Network Status LED, its reference circuit is shown in the following figure. Figure 32: NETLIGHT reference circuit NOTE The value of the resistor named “R” depends on the LED characteristic.
SIM7600G-H User manual 200ms ON, 200ms OFF Data Transmit; 4G registered; 800ms ON, 800ms OFF 2G/3G registered network OFF Power off ;Sleep NOTE NETLIGHT output low level as “OFF”, and high level as “ON”. 3.14 Flight Mode Control The FLIGHTMODE pin can be used to control MODULE to enter or exit the Flight mode. In Flight mode, the RF circuit is closed to prevent interference with other equipments and minimize current consumption.
SIM7600G-H User manual 3.15 Other interface 3.15.1 Sink Current Source The ISINK pin is VBAT tolerant and intended to drive some passive devices, such as LCD backlight and white LED, etc. Its output current can be up to 40mA and be set by the AT command “AT+ CLEDITST”. Table 21: Sink current electronic characteristic Symbol Description Min. Typ. Max. Unit VISINK Voltage tolerant 0.5 - VBAT V IISINK Current tolerant 0 - 40 mA ISINK is a ground-referenced current sink.
SIM7600G-H User manual 3.15.2 ADC MODULE has 2 dedicated ADC pins named ADC1 and ADC2.They are available for digitizing analog signals such as battery voltage and so on. These electronic specifications are shown in the following table. Table 22: ADC1 and ADC2 electronic characteristics Characteristics Min. Typ. Max. Unit Resolution – 15 – Bits Conversion time – 442 – ms Input Range 0.1 1.
SIM7600G-H User manual 4 RF Specifications 4.1. GSM/UMTS/LTE RF Specifications Table 24: Conducted transmission power Frequency Power Min. LTE-FDD B2 23dBm +/-2.7dB <-40dBm LTE-FDD B4 23dBm +/-2.7dB <-40dBm LTE-FDD B5 23dBm +/-2.7dB <-40dBm LTE-FDD B12 23dBm +/-2.7dB <-40dBm LTE-FDD B13 23dBm +/-2.7dB <-40dBm LTE-FDD B25 23dBm +/-2.7dB <-40dBm LTE-FDD B26 23dBm +/-2.7dB <-40dBm LTE-FDD B66 23dBm +/-2.7dB <-40dBm LTE-TDD B41 23dBm +/-2.
SIM7600G-H User manual 2 1850~1910 MHz 1930~1990 MHz FDD 4 1710~1755MHz 2110~2155MHz FDD 5 824～849 MHz 869～894MHz FDD 12 699~716MHz 728~746MHz FDD 13 777~787MHz 746~757MHz FDD 25 1850~1915MHz 1930~1995MHz FDD 26 814~849MHz 859~894MHz FDD 66 1710~1780MHz 2110~2200MHz FDD 41 2496~2696 MHz 2496~2696 MHz TDD Table 27: Conducted receive sensitivity Frequency Receive sensitivity(Typical) Receive sensitivity(MAX) LTE FDD/TDD See table 26.
SIM7600G-H User manual 700MHz-960MHz <0.5dB 1710MHz-2170MHz <0.9dB 2300MHz-2650MHz <1.2dB To facilitate the antenna tuning and certification test, a RF connector and an antenna matching circuit should be added. The following figure is the recommended circuit. Figure 35: Antenna matching circuit (MAIN_ANT) In above figure, the components R1, C1, C2 and R2 are used for antenna matching, the values of components can only be achieved after the antenna tuning and usually provided by antenna vendor.
SIM7600G-H User manual Two TVS are recommended in the table below. Table 30: Recommended TVS Package Part Number Vender 0201 LXES03AAA1-154 Murata 0402 LXES15AAA1-153 Murata NOTE SIMCom suggests the LTE auxiliary antenna to be kept on, since there are many high bands in the designing of LTE-TDD, such as band41. Because of the high insert loss of the RF cable and layout lines, the receiver sensitivity of these bands above will have risk to meet the authentication without the diversity antenna.
SIM7600G-H User manual If the antenna is active type, the power should be given by main board because there is no power supply on the GPS antenna pad. If the antenna is passive, it is suggested that the external LNA should be used. 4.3.2 GNSS Application Guide Users can adopt an active antenna or a passive antenna to MODULE. If using a passive antenna, an external LNA is a must to get better performance. The following figures are the reference circuits.
SIM7600G-H User manual not working. GNSS can be tested by NMEA port. NMEA sentences can be obtained through UART or USB automatically. NMEA sentences include GSV, GGA, RMC, GSA, and VTG. Before using GNSS, user should configure MODULE in proper operating mode by AT command. Please refer to related documents for details. MODULE can also get position location information through AT directly. Note: GNSS is closed by default and can be started by AT+CGPS.
SIM7600G-H User manual 5 Electrical Specification 5.1 Absolute maximum ratings Absolute maximum rating for digital and analog pins of MODULE are listed in the following table: Table 31: Absolute maximum ratings Parameter Min. Typ. Max. Unit Voltage at VBAT -0.5 - 6.0 V Voltage at USB_VBUS Voltage at digital pins (RESET,SPI,Keypad,GPIO,I2C,UART,PCM) Voltage at digital pins (SD,USIM) -0.5 - 5.85 V -0.3 - 2.1 V -0.3 - 3.05 V Voltage at PWRKEY -0.3 - 1.8 Parameter Min. Typ. Max.
SIM7600G-H User manual IOH High-level output current(no pull down resistor) - 2 - mA IOL Low-level output current(no pull up resistor) - -2 - mA IIH Input high leakage current (no pull down resistor) - 1 uA IIL Input low leakage current(no pull -1 up resistor) - - uA NOTE These parameters are for digital interface pins, such as SPI, GPIOs (NETLIGHT, FLIGHTMODE, STATUS, USIM_DET, SD_DET), SDIO, I2C, UART, PCM, COEXn, and BOOT_CFG0.
SIM7600G-H User manual Table 35: Operating mode Definition Normal operation Mode Function LTE Sleep In this case, the current consumption of MODULE will be reduced to the minimal level and the MODULE can still receive paging message and SMS. LTE Idle Software is active. Module is registered to the network, and the MODULE is ready to communicate. LTE Talk Connection between two subscribers is in progress.
SIM7600G-H User manual 3. Software condition NOTE Before designing, pay attention to how to realize sleeping/waking function and refer to Document [26] for more details. 5.3.3. Minimum functionality mode and Flight mode Minimum functionality mode ceases a majority function of MODULE, thus minimizing the power consumption. This mode is set by the AT command which provides a choice of the functionality levels.
SIM7600G-H User manual LTE data LTE-FDD B2 LTE-FDD B4 LTE-FDD B5 LTE-FDD B12 LTE-FDD B13 LTE-FDD B25 LTE-FDD B26 LTE-FDD B66 LTE-TDD B41 @5MHz @10MHz @20MHz @5MHz @10MHz @20MHz @5MHz @10MHz @5MHz @10MHz @5MHz @10MHz @5MHz @10MHz @20MHz @5MHz @10MHz @15MHz @5MHz @10MHz @20MHz @5MHz @10MHz @20MHz 22.1dBm 22.4dBm 22.3dBm 22.0dBm 22.1dBm 22.6dBm 22.2dBm 22.1dBm 22.7dBm 22.7dBm 21.9dBm 22.0dBm 22dBm 22dBm 22dBm 22.4dBm 22.7dBm 22.3dBm 22dBm 22dBm 22dBm 21.6dBm 21.7dBm 21.
SIM7600G-H User manual 6 SMT Production Guide 6.1 Top and Bottom View of MODULE Figure 39: Top and bottom view of MODULE NOTE The above is the design effect diagram of the module for reference. The actual appearance is subject to the actual product. www.simcom.
SIM7600G-H User manual 6.2 Label Information Figure 40: Label information Table 38: The description of label information No. Description A LOGO B Module part number C Project name D Serial number E International mobile equipment identity 6.3 Typical SMT Reflow Profile SIMCom provides a typical soldering profile. Therefore the soldering profile shown below is only a generic recommendation and should be adjusted to the specific application and manufacturing constraints. www.simcom.
SIM7600G-H User manual Figure 41: The ramp-soak-spike reflow profile of MODULE NOTE For more details about secondary SMT, please refer to the document [21]. 6.4 Moisture Sensitivity Level (MSL) MODULE is qualified to Moisture Sensitivity Level (MSL) 3 in accordance with JEDEC J-STD-033. If the prescribed time limit is exceeded, users should bake MODULE for 192 hours in drying equipment (<5% RH) at 40+5/-0°C, or 72 hours at 85+5/-5°C.
SIM7600G-H User manual IPC / JEDEC J-STD-033 standard must be followed for production and storage. 6.5 Stencil Foil Design Recommendation The recommended thickness of stencil foil is more than 0.15mm. www.simcom.
SIM7600G-H User manual Figure 42 : Stencil Foil 7 Packaging MODULE support tray packaging. Figure 43: packaging diagram Module tray drawing： Figure 44: Tray drawing Table 40: Tray size Length（±3mm） www.simcom.
SIM7600G-H User manual 242.0 161.0 15 Small carton drawing： Figure 45: Small carton drawing Table 41: Small Carton size Length（±10mm） 270 Width（±10mm） 180 Height（±10mm） 120 Number 15*20=300 Big carton drawing： www.simcom.
SIM7600G-H User manual Figure 46: Big carton drawing Table 42: Big Carton size Length（±10mm） 380 www.simcom.
SIM7600G-H User manual 8 Appendix 8.
SIM7600G-H User manual [6] GSM 11.14 [7] GSM 11.11 [8] GSM 03.38 [9] GSM 11.10 [10] 3GPP TS 51.010-1 [11] 3GPP TS 34.124 [12] 3GPP TS 34.121 [13] 3GPP TS 34.123-1 [14] 3GPP TS 34.123-3 [15] Radio [16] EMC [17] Safety [18] Health [19] 3GPP TS 51.010-1 [20] GCF-CC V3.23.1 [21] 2002/95/EC [22] [23] [24] [25] [26] [27] [28] Module secondary-SMT-UGD-V1.xx SIM7X00 Series_UART_Application Note_V1.xx SIM7100_SIM7500_SIM7600 Series_USB AUDIO_Application Note_V1.
SIM7600G-H User manual Design V1.0 [29] SIM7600_Series_SGMII-Refer ence_Design_V1.00 SGMII Reference Design 8.
SIM7600G-H User manual LTE Long Term Evolution MO Mobile Originated MS Mobile Station (GSM engine), also referred to as TE MT Mobile Terminated NMEA National Marine Electronics Association PAP Password Authentication Protocol PBCCH Packet Switched Broadcast Control Channel PCB Printed Circuit Board PCS Personal Communication System, also referred to as GSM 1900 RF Radio Frequency RMS Root Mean Square (value) RTC Real Time Clock SIM Subscriber Identification Module SMS Short Messag
SIM7600G-H User manual 8.4 Safety Caution Table 46: Safety Caution Marks Requirements When in a hospital or other health care facility, observe the restrictions about the use of mobiles. Switch the cellular terminal or mobile off, medical equipment may be sensitive and not operate normally due to RF energy interference. Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is switched off.
Antenna requirements 1. Antenna List: Type: Dipole antenna with non-standard SMA connector(50ohm); Model: MF25D Antenna Gain: Band 2:1.87dBi, Band 4:3.12dBi, Band 5:0.91dBi, Band 12:0.95dBi, Band13:2.23dBi, Band 25:1.87dBi, Band 26:0.91dBi, Band 41:2.9dBi, Band 66:3.12dBi 2. The user must match the MF25D antenna with the non-standard SMA connector and cannot change the antenna.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device.
