<<< user and installation manual ht3000 Downloaded From projector-manual.com Sim2 Manuals 460.554.
ht3000 1 REMOTE CONTROL AND KEYPAD Backlighting Backlights the keys on the remote control LIGHT STAND-BY / ON Sets the panel to stand-by . KEYS 0-9 Select the sources directly. Switches on the panel from Standby. SOURCE Displays the source selection menu. ESCAPE Deactivates the On Screen Display. Up/Down/Left/Right Arrow keys Navigates between the On Screen Display menus and parameter settings. Arrow Up/Down call up the quick menus.
ht3000 1 INTRODUCTION The HT3000 projector represents the state of the art in image processing combined with the innovative DLP™ sytsem and outstanding optics. Its range of inputs (1 Composite Video input, 1 S-Video input, 1 Components or RGB input, 1 graphic RGB input, 2 HDMI™ inputs) allow it to be connected to a wide range of analogue and digital sources: DVD players, video recorders, satellite and terrestrial receivers, computers, video game consoles, camcorders, etc.
ht3000 2 IMPORTANT SAFETY INSTRUCTIONS This symbol indicates the possible electric shock hazard associated with uninsulated live components in the interior of the unit. This symbol indicates the presence of important instructions regarding the use and maintenance of the product. CAUTION To reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing the top cover of the projector. For technical assistance refer to trained personnel authorised by the manufacturer.
ht3000 PROJECTOR 20 5 4 6 13 2 3 1 13 10 7 12 +12 11 V 1 USB 1.1 9 R/Pr CO C/Y NTR OL 3 (RS2 32) B/Pb HV GRA PH 19 ICS S-VI DEO RG B 4 2 S-VI DEO REM OTE AU 1 DIO OU T MEN U 18 HD MI 1 MEN 17 U ES C HD MI SO URC E 2 O I 16 15 14 1 2 3 4 5 6 7 8 9 10 Projection lens. Lens shift knob. Remote control IR sensor on front of unit. Cooling air inlet vents. Adjustable feet. Adjustable carry-handle. Bulb compartment. Fused power socket. Main power switch.
ht3000 • Changing the fuses. Before changing the fuse disconnect the unit from the mains power supply. The fuse compartment is next to the power supply connector (Fig. 3). Remove the fuse holder (2) with a flat head screwdriver and replace the fuse (3). Fit a new spare fuse (4). Use only T 5A H fuses. • Do not allow the unit to overheat. To prevent this, allow a free space of at least 40 cm around the back of the projector. Do not block the ventilation slots.
ht3000 3 UNPACKING 3 To remove the HT3000 system from its carton follow the diagrams (Fig. 4). 4 Keep the carton for use when transporting or shipping the unit. 2 1 Fig.4 CONTENTS OF PACKAGE - the projector - Remote control - four 1.5V AAA batteries (for remote control) - three power cables (EU, UK, USA) for the projector - the user manual. - Lens shift key If anything is missing, immediately inform your dealer.
ht3000 4 INSTALLATION Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling installation. OM ZO WARNING: If using the ceiling mount bracket, scrupulously observe the safety instructions included with the bracket itself. If using a bracket other than that supplied by SIM2 Multimedia, make sure that the projector is at least 65 mm below the ceiling and that the bracket does not obstruct the air vents (intake and outlet).
ht3000 screen’s axis. Prevent ambient light shining directly on the screen during projection as this will reduce the contrast of the projected image. Furniture and other objects with reflecting surfaces, as well as light coloured walls should be avoided, as they are likely to interfere with the screen’s characteristics. +12V USB 1.1 R/Cr C/Y CONT 3 ROL B/Cb (RS23 2) HV GRAP HICS S-VID RGB EO 4 2 S-VID REMO TE EO 1 AUDI O OUT MEN HDM I1 U Fig.
ht3000 5 SWITCHING THE PROJECTOR ON AND OFF WARNING: Connect the projector to a power supply with a nominal voltage within the following values: 100-240 V AC, 50/60 Hz. It must be earthed (Fig. 12). Power Switch: Position I: On Position 0: Off HV GR AP HIC S-V SR GB IDE O 4 2 S-V IDE REM O 1 AU OT DIO E T PH 1 ICS R S-V IDE O GB 4 2 S-V IDE O R EM OTE AU 1 DIO OU T ME NU HD MI NU MI HV GR A ME HD With the remote control: press one of the keys 1...9 or with 0.
ht3000 Switching off and returning to standby With the remote control: press . With the keypad: press . When switching off, the projector goes into stand-by mode and stores the input selection at the time of switch-off. The fans keep running until the lamp cools down (green and Led red Led blue Status red leds on), after which they automatically switch off. Do not switch off the projector with the power switch until the fans have stopped running.
ht3000 HT3000 - Connection panel 3 RGB - YPrPb 4 GRAPHICS RGB +12 V USB 1.1 R/P r CO 2 C/Y NTR OL 3 (RS 232 B/P b S-VIDEO 1 HV ) GR AP H ICS S-V I RG DE B O 4 2 S-V I REM OT E VIDEO DE O AU 5 HDMI 6 1 DIO HDMI OU T ME NU HD MI 1 5 ESC HD MI 2 6 SO U RCE O I 1 2 3 Television receiver DVD player Television receiver HDTV receiver VCR Videocamera Video game console DVD player VCR 4 computer 5 6 DVD player HDTV receiver Video game console Fig.
ht3000 COMPOSITE VIDEO 1 Fit an RCA connector with a Composite Video (CVBS) signal to this input. The output connector on the external appliance is normally coloured yellow and will often be labelled VIDEO. Other signal and socket formats may be preferable (because they give better image quality), but this type of output socket is still the most commonly used, and nearly all television receivers, video recorders, DVD players and camcorders, etc. use it.
ht3000 Motorised screen outputs RS232 interface connector 12Volt 120 mA CONTROL RS 232 +1 2V +12 V CONTROL USB US B1 .1 R/C r C/Y 3 RS2 32 USB B/C b R/C r 1.1 HV GR AP C/Y 3 RS2 32 HIC SR GB B/C b HV GR AP S-V HIC SR GB IDE O 4 2 S-V IDE REM Fig. 17 The projector is equipped with two outputs (Voltage: 12 Vdc) for motorised projection screen and screen masking systems, used for masking off the projection area to match the projected image aspect ratio (Fig. 17).
ht3000 9 ON SCREEN MENU All system functions can be operated from the keypad or remote control, with the aid of a complete, user-friendly on screen menu. INPUTS The input selection menu is called by pressing 0 on the remote control or with the keypad SOURCE key. To select an input, scroll through the list with the ▲ e ▼ keys until the required input is highlighted, then press ▶.
ht3000 To access these submenus, press the <, mentre l’uscita ed il ritorno al livello superiore avviene con la pressione dei tasti MENU+/- key. Press ESC on the remote control or keypad to interrupt the menu display or wait for it to disappear automatically after the number of seconds set on theSET-UP page. PICTURE This menu includes all image adjustment settings. Adjustments that are not available for a given input do not appear on the menu. Table 4 summarises the adjustments available for each input.
ht3000 Selecting the NO option causes the de-interlacer to apply a Motion compensated algorithm optimized for video camera signals. NOISE REDUCTION This adjustment serves to select the noise reduction filter value. In this latter case, simply click on the slider and set the value with the ◀ and ▶ keys on the remote control. IMAGE This menu features adjustments relating to picture position, aspect ratio, magnification etc.
ht3000 There are 4 sets of gamma curves: Standard (ST), Enhanced SIM2 (EN) and Graphics (GR), User. The Standard curve has been defined for general use, and is set for videocameras, digital cameras, and for viewing films or photos on your PC. The Enhanced set is suitable for watching movies. The Graphics set is suited to displaying synthetic graphics (PC, CAD, PC presentations, etc.). User enables you to define your own curve. You can thus select the coefficient which determines the curve.
ht3000 Values from 1.5 to 2.2 allow you to emphasise the detail of dark images, but reduce overall contrast. Values higher than 2.2 increase overall contrast, but reduce the detail of dark areas. For the most common video sources, the overscanning value can be in the range (no overscanning) to 32 (maximum). The resulting image always maintains the selected aspect irrespective of the selected overscan value.
ht3000 MENUS LANGUAGE It allow to select the languages available for the On Screen Display menus. KE YS TO NE 20 % +12V USB 1.1 R/Cr C/Y CONT 3 ROL B/Cb (RS23 2) HV GRAP HICS S-VID RGB EO 4 2 S-VID REMO TE EO 1 AUDI O OUT MEN HDM I1 U 5 HDM ESC I2 6 INPU T 0 I Fig.26 POWER ON If selected (AUTO), this option allows the system when the projector is connected to the mains power supply.
ht3000 Table 6 HDMI™ RGB Grafico YCrCb RGBS Regolazioni RGBS 15kHz YCrCb 15kHz Video S-Video Ingressi Posizione - Formato Frequenza - - - Fase - - - Temperatura colore Correzione Gamma Overscan Ritardo Y/C - - - - Entering text The text entry menu in (Fig.30) makes it quick and easy to enter text.
ht3000 Blank Switches off the video signal and displays a black page. As soon as the key is pressed an OSD indication lasting a few seconds confirms that the function has been activated. Pressing any further keys on the remote control restores the previous conditions. Color Temperature Clicking the key in question again (F1 / F2) enables you to set the colour temperature from High, Medium, Low and User.
ht3000 232 ) the corresponding drop-down menu (◀ key). Select the line ‘Save initial settings’. To confirm the operation, the message ‘Initial settings saved in Memory 1’ is shown at the bottom of the display and the letter “I” appears to the left of the memory name. HV GR A S-V IDE PH O ICS RG B 4 2 S-V IDE O R EM OTE AU 1 DIO OU T ME NU HD MI 1 5 ESC HD MI 2 6 INP UT Rename a memory All Memories can be named.
ht3000 INFO Displays the current status of the projector and information concerning the projected video/graphic signal. This function is displayed on pressing the key on the remote control (or, in the absence of the On Screen Display, the ▶ key on the keypad). QUICK MENUS The quick menus provide access to the main adjustments that affect image quality without calling the main menu.
ht3000 10 CLEANING AND MAINTENANCE The projector does not require internal adjustment. There are no user serviceable parts inside the projector. To replace the bulb or any other repairs, contact your local service centre. To clean the outer cover of the screen use a soft cloth and moisten slightly if necessary with water and a small amount of neutral soap. Do not rub the rear panel markings. The lens may be cleaned with a very soft, non-abrasive small brush, in order to remove dust particles.
ht3000 Incomplete image along borders (vertical and horizontal) • • • • • Check compatibility of the video or graphic signals with the technical specifications of the system, and specifically, with the specifications of the selected input. Recall the automatic image adjustment function by pressing the key “A” on the remote control or ◀ on the projector’s keypad. Adjust the horizontal and vertical position of the image with the IMAGE / POSITION menu (if available for the input in question).
ht3000 A TECHNICAL SPECIFICATIONS ELECTRONICS GENERAL PROJECTOR SPECIFICATIONS Input signals: • COMPOSITE VIDEO (CVBS) gold plated RCA connectors 1,0 Vpp / 75 Ω, negative synchronisation • 1 S-VIDEO (Y/C) 4-pole mini-DIN connector Y: 1.0 Vpp / 75 Ω, negative synchronisation C: 0.286 Vpp / 75 Ω, [ nominal NTSC burst level] 0.3 Vpp / 75 Ω [nominal PAL, SECAM burst level] • 1 COMPONENTS (Y/Pr/Pb/) - RGBS 1 set of 4 RCA connectors - Component signals Y: 1.
ht3000 B ON SCREEN MENU LAYOUT Video • S-Video [NTSC] Brightness Contrast Color Tint Sharpness Filter Cinema Mode Video Type Noise reduction Brightness Contrast Color Sharpness Sharpness Mode Component Ghaphics Video • S-Video Aspect Color Temperature Gamma Correction Brillant Color Overscan Position Y/C Delay Aspect Color Temperature Gamma Correction Brillant Color Overscan Position Frequency Phase Normal Anamorphic Letterbox Panoramic Subtitles Pixel to Pixel User 1 User 2 User 3 Color Temperatur
ht3000 Auto Stand-by Always Yes Zoom Focua Magnification Blank Color temperature Gamma correction VIDEO 1 S-VIDEO 2 COMP RGB 3 GRAPH RGB 4 HDMI 5 HDMI 6 Save current settings Save initial settings Rename Downloaded From projector-manual.
ht3000 C DIMENSIONS 30 Downloaded From projector-manual.
ht3000 D PROJECTION DISTANCE 16/9 Screen size (diagonal) Screen width Min projection distance Max projection distance max L max L .in m in. m in. m in.
SIM2 Multimedia S.p.a. • Viale Lino Zanussi, 11 • 33170 Pordenone - ITALY Phone +39.434.383.253-256 • Fax +39.434.383260-261 www.sim2.com • e-mail: info@sim2.it SIM2 USA Inc. • 10108 USA Today Way • 33025 Miramar FL - USA Phone +1.954.4422999 • Fax +1.954.4422998 www.sim2usa.com • e-mail: sales@sim2usa.com SIM2 Deutschland GmbH • Gewerbepark, 17 D-35606 Solms Phone 0800.800.7462 • Fax 0800.900.7462 www.sim2.com • e-mail: info.de@sim2.it SIM2 UK LTD • Steinway House Worth Farm, Little Horsted Nr.