PROTECTION FROM WITHIN® clarus fx2 user guide
[1] CLARUS Fx SYSTEM COMPONENTS Fixed Lead‡ In-Ear Headset Control Unit Ear Retainers Foam Ear Plugs S, M, L, XL ‡Determined at time of purchase. XTS Connector shown above.
CONTROL BOX [2] [4] Foam Ear Tip Fixed Lead *XTS connector shown On / Off Hear-Thru Volume PTT A PTT B In-Ear Mic AAA Battery Chamber In-Ear Bud Nape Adjuster
IN-EAR HEADSET [3] [5] Ear Bud R (2) Insert ear plug into apply ear plug to stem ear canal and position ear retainer in ear of ear bud (1) Pinch foam and Foam Ear Plug Molle Clip
OPERATION (4) Press center key to increase / decrease Hear-Thru sensitivity level (1) Connect CLARUS to radio and turn radio on AAA VP VP “MAX” “OFF” (6) To turn the system off, press and hold the center key for 5 seconds (2) Insert a single AAA battery - [6] [4] + (3) To turn the system on, press and hold the center key for 5 seconds VP = Voice Prompt Warning: Prolonged use of Maximum Hear-Thru volume could damage your hearing.
FIXED LEAD OPTIONS* [5] [3] MBITR/PRC-117/152 6 pin RADIO ADAPTOR Motorola APX Radio RADIO ADAPTOR 6 pin Hirose RADIO ADAPTOR *Fixed lead options subject to change without notice Motorola XTS/Jeday/AN-PRC-153 RADIO ADAPTOR Kenwood RADIO ADAPTOR Motorola HT-1250 RADIO ADAPTOR XG-75/P7300 RADIO ADAPTOR
www.silynxcom.com 9901 Belward Campus Drive Suite 150 Rockville, MD 20850 USA 1.866.325.1731 | info@silynxcom.com | customersupport@silynxcom.
