PROTECTION FROM WITHIN ™ clarus xpr user guide
[1] CLARUS SYSTEM COMPONENTS In-Ear Headset Control Unit / Push-to-Talk Radio Adaptor Cable *XTS Adaptor Shown Fixed Headset Configuration Modular Headset Configuration Ear Retainers S, M, L Foam Ear Tips S, M, L
GETTING STARTED (1) Connect primary radio adaptor to control unit Primary Radio Adaptor Primary Radio Adaptor PRIME SEC Dual Comms Adaptor (1a) If using optional dual comms adaptor, connect primary radio adaptor to lead labeled “PRIME” and connect dual comms adaptor to control unit [2] [4] (2) Connect headset to control box (For XPR with QDC only)
INSERTING EARBUDS [3] [5] (1) Pinch foam and apply ear plug to stem of ear bud Ear Bud Foam Ear Tip (2) Insert ear plug into ear canal R Nape Adjuster
OPERATION (1) Connect radio adaptor cable to radio and turn radio on [6] [4] (2) Insert a single AAA battery - (3) To turn the system on, press and hold the “+” key for 5 seconds (4) To turn the system off, press and hold the “+” key for 5 seconds AAA +
CONTROL UNIT [3] [5] Primary PTT Press (-) key to decrease Hear-Thru sensitivity level Press (+) key to increase Hear-Thru sensitivity level VP VP “Hear-Thru Off” “Maximum Hear-Thru” AAA Battery Chamber Molle Clip VP Secondary PTT = Voice Prompt Press and hold (+) key for (5) sec to power on / off
PRODUCT SPECIFICATIONS & ACCESSORIES SUBJECT [2] TO CHANGE WITHOUT NOTICE MBITR/PRC-117/152 6 pin RADIO ADAPTOR Motorola APX Radio RADIO ADAPTOR *Dual Comms RADIO ADAPTOR Motorola XTS/Jeday/AN-PRC-153 RADIO ADAPTOR **Peltor/Sordin Headset CABLE ADAPTOR * Only compatible with radio and cell phone when used with CLARUS XPR ** Only compatible with CLARXPR-QH configurations Motorola HT-1250 RADIO ADAPTOR Smart Phone CABLE ADAPTOR
www.silynxcom.com 9901 Belward Campus Drive Suite 150 Rockville, MD 20850 USA 1.866.325.1731 | info@silynxcom.com | customersupport@silynxcom.
