TS231U PRODUCT INTRODUCTION The TS231U SuperSpeed USB 3.0 Enclosure provides easy access to two standard 3.5” SATA HDD. It has a USB 3.0 and eSATA interface for connection with PC or notebook. The device usage through the USB 3.0 5Gbps throughput to reach best data-storage performance. SuperSpeed USB 3.0 Enclosure has four RAID modes which include RAID 0, RAID 1, JBOD and NORMAL. With its easy-to-install features, TS231U definitely offers a convenient and economical way for storage. PACKAGE CONTENT 1. 2.
TS231U RAID SWITCH SWITCH RAID MODE 1 NORMAL 2 RAID 0 3 RAID 1 4 JBOD(COMBINE) Please push MODE button to confirm RAID mode CAUTION!! Backup your data in disk before setting any RAID mode, because all disks will be formatted first when setting RAID mode Bitte drücken Sie die MODE-Taste zur Bestätigung des RAID-Modus VORSICHT: Eine Änderung des RAID-Modus erfordert die Formatierung der Festplatten.
TS231U OPERATION 1. Connect power cord and TS231U to your system with USB 3.0 cable or eSATA cable. 2. Open the front door and insert HDD (2 HDDs of identical capacity are highly recommended) 3. Turn on the power 4. Set RAID mode and push MODE button 5. Use Disk Manager (Windows) or Disk Utility (OS X) to create and format disk 6. In Windows XP, it does not recognize more than 2TB. In Windows Vista/7 if the disks larger than 2TB, you have to convert to GPT mode when initialize disk. 1.
TS231U OPERATION 1.Подключите кабель питания и устройство TS231U к вашей системе с помощью кабеля USB 3.0 или кабеля eSATA. 2.Откройте переднюю дверцу и установите жесткий диск (настоятельно рекомендуется использовать 2 жестких диска с одинаковым объемом памяти) 3.Включите питание 4.Установите режим RAID и нажмите кнопку MODE (Режим) 5.Для создания и форматирования диска используйте программу Disk Manager (Windows) или Disk Utility (OS X) 6.ОС Windows XP не распознает память свыше 2 ТБ.
TS231U CAUTION • Backup your data in disk before setting any RAID mode, because all disks will be eliminated in the operation when setting RAID mode. • Do not plug or unplug power cord with wet hand. • Do not disassemble TS231U by yourself. • Do not use in high-temperature environment. • Eine Änderung des RAID-Modus erfordert die Formatierung der Festplatten.
TS231U RAID MODE RAID 0 Diagram 1. RAID 0 (Striping) for high performance The drives are shown as one large single volume but the total size will depend on the drive with the smallest capacity. This setting is used where speed is the primary objective but RAID Level 0 (also called striping) is not redundant. This form of array splits each piece of data across the drives in segments; since data is written without any form of parity data-checking, it allows for the fastest data transfer of all other modes.
TS231U RAID MODE RAID 0 Diagram 1. RAID 0 Жесткие диски отображаются как один большой том, но общий размер зависит от жесткого диска с меньшей емкостью. Эта конфигурация используется, если высокая скорость является главной целью. Но уровень RAID 0 (также называемый чередованием) не является избыточным массивом. В такой конфигурации массива каждый фрагмент данных разделяется по жестким дискам на сегменты.
TS231U RAID MODE RAID 1 Diagram 2. RAID 1 (Mirroring) for high security Two drives show up as one volume but only 50% of the total capacity, depending on the drive with the smallest capacity, can be used. RAID 1 creates an exact copy (or mirror) of a set of data on the second drive. This is useful when reliability and backup take precedence over storage capacity. Should one hard drive fail, it can be replaced and the data rebuilt automatically. 2.
TS231U RAID MODE RAID 1 Diagram 2. RAID 1 Два жестких диска отображаются как один том, но можно использовать только 50% суммарной емкости дисков, в зависимости от жесткого диска с меньшей емкостью. Массив RAID 1 создает точную (зеркальную) копию набора данных на втором жестком диске. Эту конфигурацию можно использовать, если приоритет перед скоростью имеют надежность и необходимость резервного копирования. При сбое одного диска его можно заменить, и данные будут автоматически восстановлены.
TS231U RAID MODE JBOD(COMBINE) Diagram 3. JBOD(COMBINE) In this mode all hard drives will be concatenated into a single hard drive with large capacity. Total size = the combination of all hard drives 3. JBOD In diesem Modus werden sämtliche Festplatten zu einem einzelnen Laufwerk mit hoher Kapazität zusammengefasst. Gesamtgröße = Kombination sämtlicher Festplatten 3. JBOD Dans ce mode, tous les disques durs seront concatenés en un seul disque dur avec une plus grande capacité.
TS231U RAID MODE 4. NORMAL In this mode, each hard drive will be seen separately as single drive. 4. NORMAL In diesem Modus werden sämtliche Festplatten als separate Einzellaufwerke angesprochen. NORMAL Diagram 4. NORMAL Dans ce mode, chaque disque dur est un disque unique. 1250$/ ൞↚⁗ᕅсθ∅乼⻕ሽ㻡㿌⛰࡛жⲺ⻕Ⱦ 4. NORMAL En este modo, cada disco duro se verá por separado como un disco independiente 4. NORMAL In questa modalità, tutti i dischi rigidi appaiono separatamente come singolo disco. 4.
TS231U RAID1 Rebuild ¿Cómo reconstruir la matriz RAID 1 cuando falla un disco duro? 1. Cuando un disco duro está dañado, el LED de acceso al disco duro se pondrá en rojo. 2. Apague la potencia y luego retire el disco duro defectuoso. 3. Asegúrese de que el TS231U se conecta a su sistema y conecte la potencia. 4. Asegúrese de que puede acceder a los datos en su disco duro no dañado. 5.
TS231U Warranty Information This product has a limited 2 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor. Warranty terms & conditions 1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.