EC04 MANUAL PCI express card with two USB 3.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector Introduction SilverStone created an excellent expansion card product, the EC04, which connects to the motherboard via single lane PCI Express 2.0 to support two external and a dual port USB 3.0 connector for maximum compatibility and flexibility. This card is a great add-on for systems that require connections to multiple USB 3.0 devices such as SilverStone’s own USB 3.0 enclosures RVS02 and TS07. Features USB 3.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 1 Install EC04 onto PCIe slot of Motherboard. (refer to PIC1) Установите плату EC04 в гнездо PCIe материнской платы. (см. рисунок 1) Installieren Sie die EC04 im PCIe-Steckplatz des Motherboards. (vgl. Abb. 1) 將EC04 安裝於主機板上的PCI-E插槽。 （請參考圖一） Installez le EC04 dans un emplacement PCIe de la carte mère.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 2 Plug Molex 4P power connecter. (refer to PIC1) Подсоедините 4-контактный разъем питания Molex. (см. рисунок 1) Schließen Sie den 4-poligen Molex-Netzstecker an. (vgl. Abb. 1) 將4pin電源線接上EC04 。（請參考圖一）） Branchez le cordon d'alimentation Molex 4P. (voir image 1) 将4pin电源线接上EC04 。（请参考图一） Conecte el Mólex 4P en el conector depotencia. (consulte la IMAGEN1) Plug Molex 4P電源コネクタを接続します。 (図1.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 3 USB 3.0 connector Plug internal 20P dual port USB 3.0 connector. (refer PIC1) USB 3.0 Port 4P power connecter Schließen Sie den 20-poligen internen Dual-Port- USB 3.0-Stecker an. (vgl. Abb. 1) USB 3.0 Port Branchez le connecteur USB 3.0 à double port interne 20P. (voir image 1) Conecte el puerto dual 20P al conector USB 3.0.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 4 Install Texas Instruments USB 3.0 host controller driver. Установите драйвер хост-контроллера Texas Instruments USB 3.0. Installieren Sie den USB 3.0-Host-ControllerTreiber von Texas Instruments. 安裝Texas Instruments USB 3.0 host controller 驅動程式。 Installez le pilote du contrôleur hôte Texas Instruments USB 3.0. 安装Texas Instruments USB 3.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 5 After above installation, you will find the Texas Instruments USB 3.0 host controller in the device manager. (refer to PIC2) После установки указанного выше драйвера хост-контроллер Texas Instruments USB 3.0 отобразится в диспетчере устройств. (см. рисунок 2) Nach der obigen Installation finden Sie den USB 3.0-Host-Controller von Texas Instruments im Geräte-Manager. (vgl.Abb.
EC04 PCI express card with two USB 3.
EC04 PCI express card with two USB 3.0 external ports and internal 19P dual port connector INSTALLATION 6 Plug your USB 3.0 device and enjoy the 5Gbit/s USB 3.0 super speed transfer speed. Подключите устройство с интерфейсом USB 3.0 и передавайте данные на высокой скорости до 5 Гбит/с через разъем USB 3.0. Schließen Sie Ihr USB 3.0-Gerät an und genießen die USB 3.0-Super-SpeedÜbertragungsgeschwindigkeit von 5 Gbit/s. 連接USB 3.0裝置並開始享受高速傳輸速度。 Branchez vos appareils USB 3.
December, 2011
