User's Manual

ManualsBrandsSilverlit Toys Manufactory ManualsElectronics3D Twister - Sharpz

EI-3419b

Instruction Manual

ENGLISHENGLISH

ENGLISH

2 3

Cautions:

Care and Maintenance:

Note:

- Parents, this toy is recommended for children. To ensure that your child's play is both safe and fun, please review the operating

instructions with your children.

- DO NOT pick up moving vehicle.

- Keep hands, hair and loose clothing away from the tires and the wheel hubs when power switch is turned ON.

- Remove battery from the toy when not in use.

- DO NOT operate your vehicle on street. Avoid hitting people, pets or home furnishings.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

When this appliance is out of use, please remove all batteries

and dispose of them separately. Bring electrical appliances to the

local collecting points for waste electrical and electronic

equipment. Other components can be disposed of in domestic

refuse.

Waste Electrical and Electronic Equipment (WEEE)

The crossed-out dustbin symbol indicates that batteries, rechargeable

batteries, button cells, battery packs, etc. must not be put in the

household waste. Batteries are harmful to health and the environment.

Please help to protect the environment from health risks. Tell your

children to dispose of batteries properly by taking them to the local

collecting points. This way batteries are recycled safely.

TIPS

Best performance can be

only obtained by using

new alkaline batteries.

For ages 5+

Ab 5 Jahre

A partir de 5 ans

Leeftijd vanaf 5 jaar

A partir de 5 años

Dai 5 anni in su

WARNING:

CHOKING HAZARD - Small parts.

Not for Children under 3 years.

- Non-rechargeable batteries are not to be recharged.

- Rechargeable batteries are to be removed from the toy before being charged.

- Rechargeable battery are only to be charged by an adult.

- Different types of batteries or new and used batteries are not to be mixed. (Transmitter only)

- Only batteries of the same or equivalent type as recommended are to be used.

- Batteries are to be inserted with correct polarity.

- Exhausted batteries are to be removed from the toy.

- The supply terminals are not to be short-circuited.

- Do not mix old and new batteries. (Transmitter only)

- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. (Transmitter

only)

- Always remove batteries from the toy when it is not being used for a long period of time.

- Wipe the toy gently with a clean damp cloth.

- Keep the toy away from direct sunlight and/or direct heat.

- Do not submerge the toy into water that can damage the electronic assemblies.

- Parental guidance is recommended when installing or replacing batteries.

- Users should keep and retain this information for future reference.

- Users should keep strict accordance with the instruction manual while operation the toy.

- Vehicle

- Transmitter

- Instruction manual

- 2 x Spare Rear Tire

- 8 x adhesive tape

- Paper ramp

Battery requirement for Transmitter:

Power Supply :

Rating : DC 6 V , 2.7 W

Batteries : 4 x 1.5 V "AA"/LR6/AM3(not included)

Battery requirement for Vehicle:

Power Supply :

Battery ratings : DC 3.7 V , 2 W

Batteries : 1 x 3.7 V LiPo Rechargeable Battery Pack (included)

Capacity : 75 mAh

Delivery Contents

Safety Precautions

Symptom Cause Correction

Vehicle runs slowly

or does not run.

Vehicle does not

react, or react

poorly to operation

by transmitter.

- PAIRING / SYNC Procedure is not

yet completed or done.

- Out of the control range of distance.

- Enter into power save mode.

- ON/OFF switch is not in "ON".

- Low battery.

- Hair, carpet or dirt might be

trapped between wheels.

- Pair the vehicle and the transmitter by press and hold

both pairing buttons.

- Vehicle runs distance up to 15 meters (or 50 feet)

indoor.

- Switch off the vehicle and turn on again.

The vehicle is not

driving straight

- The vehicle is not adjusted properly.

- The front and rear tires are

misplace.

- Adjust the steering axle adjust.

- Check the tires. If issue persists, try swaping left and

right tires or insert them in different orientation.

Components are

loose or detached.

- Bumpers or wheels are out of place. - Insert the bumper to the slot in the front of the vehicle.

- Place the tires evenly on the rims. The front tires are

thinner and the rear tires are thicker.

- Switch on the power.

- Recharge the vehicle.

- Carefully remove such foreign materials.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Transmitter

Spare Rear Tire

Vehicle

FCC Statements

Silverlit SAS, Espace Green Parc, Route de Villepecle, 91280 Saint Pierre du Perray / France.

This product is in compliance with

the essential requirements and

other relevant

provisions of Directive

1999/5/EC.

Top side

Bottom side

Charging socket

Side view

Charging

indicator

Note: 1. The vehicle can operate for about 4 - 5 minutes per every 12 - 20 minutes charging.

2. Before recharging the battery, wait 10 - 15 minutes for it to cool down.

1. Pull out the charging plug from the bottom of the transmitter (fig. 4).

2. Switch off the vehicle. Insert the charging plug into the charging socket on the vehicle. Switch on the

transmitter. The charging process will begin automatically and the charging indicator will light up (fig. 5).

3. Unplug the charging plug after the charging indicator turns off. Charging is completed (fig. 6).

fig. 4

1. Switch off the transmitter

2. Open the battery compartment by loosening the screw (fig. 1).

3. Put 4 Type AA battery in the battery compartment as per the polarity shown inside (fig. 2).

4. Place back the battery compartment cover (fig. 3).

Charging the vehicle

Transmitter battery installation

ON/OFF Switch

Steering axle adjuster

PAIR/SYNC

button

Charging plug

Throttle trigger

PAIR/SYNC button

ON/OFF switch

Steering wheel

Gear lever

Vehicle battery

indicator

Battery

compartment cover

(at the back)

Throttle trimming dial

(at the back)

1. Part Identification

2. Battery Installation and Charging

fig. 1 fig. 2

5. Trouble Shooting

1. Set the gear lever to

select driving speed.

Select ‘Hi’ for high

speed mode and ‘Lo’

for normal speed mode

for easier control.

2. Turn the steering axle

adjuster at the bottom

towards left when the

vehicle drives to the

right involuntarily. If it

turns left involuntarily,

turn the adjuster

towards right.

5. Set up the backflip ramp

High speed

Low speed

Bottom side

fig. 3

(i) Fold the flaps down

to form a ramp.

Place four pieces of

cellular tape on the

four corner edges to

secure the ramp.

(ii) Affix the paper ramp

on the floor by two

pieces of cellular

tape.

4. Configuration/Adjustments

Driving Tips:

1. The turning speed and radius may vary at different control combination.

2. Operate only on flat, smooth (but not slippery), dry surfaces and low pile carpet, as hair, carpet or dirt can

affect the operation of the vehicle.

3. Don't drive your vehicle in sand or through water or snow, if your vehicle gets wet, wipe with a towel and allow

to dry completely.

power indicator

Paper Ramp & Adhesive Tape

The transmitter receives a signal from the car when the battery is low.

When the vehicle battery indicator on the transmitter starts blinking, recharge the vehicle ..

Flipping System

switch

3. Some times the throttle

signal between the racer

and transmitter may

need adjustment so the

racer stays still in the

idle mode. Adjust the

throttle trimming dial to

establish an idle setting

for the vehicle. If the vehicle

rolls forward by itself, turn the

dial clockwise until it stops

moving. Turn it anticlockwise to

compensate for reverse idle.

Forward

Backward

Throttle trimming dial

4. Rear Tires

Replacement

Rear tires with larger

diameter are available

as replacement.

Change to the spare

rear tires to obtain top

speed performance. It

is recommended to get

familiar with the control

before using them.

3. Operation

3.1 Procedure for PAIRING / SYNCHING the Vehicle and Transmitting

2.4 GHz technology allows for many

racers to run without signal interference. A

connection, or pairing, must be made

between the car and the transmitter to

function. Sometimes, the pairing will

happen automatically. If it does not, or if

the connection is lost then follow these

steps to sync the racer and the

transmitter.

1. Turn the Power Switch button to 'ON'

position both on the Vehicle and

Transmitter, Red LED will then flash

(fig. 7).

2. Press the PAIR/SYNC button both on

the Vehicle and Transmitter.

The Synchronize/Pairing procedure is

COMPLETED when you can see the

Red LED light up solid (not blinking) on

both Vehicle and Transmitter (fig. 8).

3. Hold the transmitter with your left hand

like holding a pistol (fig. 9).

For better driving experience, crash

feedback is integrated to the

transmitter. The transmitter will vibrate

when the vehicle hits an object.

(ii) Turning Left & Right

Rotate the steering wheel clockwise to

steer the vehicle right and rotate the

steering wheel counter clockwise to

steer the vehicle left.

(iii) Flipping System Switch

The car is designed to know which side

is on top, and it will send a signal back

to the transmitter allowing the

transmitter to steer right or left no matter

which is on top.

When the Flipping System switch is

turned to OFF, the transmitter will not

sense the flipping motion of the car,

which will affect the steering. To have

the best steering performance, keep the

Flipping System Switch in the ON

position.

Forward

Backward

Forward

Left Right

(i) Forward & Backward

Pull throttle control (trigger) to drive the

vehicle forward and push the throttle

control away from you to drive in

reverse.

3.2 Control

To achieve maximum speed, operate

the vehicle indoor on dust-free floor.

Avoid driving it in thick /soft carpet,

The vehicle may be damaged as a

result.

TIPS!

The car runs at very high speed. It will

take practice to steer it precisely. Try it

in low gear to start.

TIPS!

Flipping System Switch

When the flipping system is OFF, the

side of the car Steering axle adjuster

will be recognized as the top.

Top side

The vehicle will

automatically enter power

saving mode after 10

minutes not in use. To

turn it on again, simply

switch the ON/OFF switch

to ‘OFF’ position and then

‘ON’ position again.

fig. 9

Under the environment with

electrostatic discharge, the

sample may malfunction

and require user to pair the

controller and car again.

Right

Left

PAIR/SYNC

button

RACERSYNC

Transmitter

Red LED

PAIR/SYNC

button

Power Switch

button

Red LED

ON/POWER

OFF

fig. 7

Transmitter

Red LED

Power Switch

button

Vehicle

fig. 8

Red LED

Vehicle

fig. 5

fig. 6