User's Manual

ManualsBrandsSilicon Labs ManualsElectronicsSingle Band SIP Module,Small Form Factor Single Band 802.11b/g/n, Bluetooth 5.0, Zigbee Module

SMSK User Manual

See web pages in: https://support.scorchedice.ca/

(this content is also available in French on the web site)

App

Where do I get the app?

Right now – our app only works on the Apple iPhone and iPad. You can

download our app on the Apple App store.

Is the app available on Android?

At this time our App only works on iOS devices – however we plan to

release an Android version soon. Sign up for our newsletter here to ﬁnd out

when the Android version will be launched

How do I pair my app and sensors?

It’s best to follow the instructions in the app, here is a summary you can

also follow.

First, make sure Bluetooth is on in your phone settings. If you are not sure if

bluetooth is on – or not sure how to do this – please consult this guide on

Apple’s support site. Click the skate icon in the center of the screen on the

bottom navigation bar. You will be prompted to Set Up Your Skates. Click

one of the two skate icons in the middle of the screen. When prompted

Summary of content (8 pages)

PAGE 1
SMSK User Manual See web pages in: https://support.scorchedice.ca/ (this content is also available in French on the web site) App Where do I get the app? Right now – our app only works on the Apple iPhone and iPad. You can download our app on the Apple App store. Is the app available on Android? At this time our App only works on iOS devices – however we plan to release an Android version soon.
PAGE 2
enter the 5 digit code found on the sensors. Once the ﬁrst skate is connected, click the other icon and conﬁrm the 5 digit code matches the number found on the sensor. Where is the set number that I need to enter? The Sensor set number can be found at the back of each Sensor. Do I need both a WiFi and Bluetooth connection? Yes, the Bluetooth connects the Sensors to your phone so it can act as a remote control for the Sensors.
PAGE 3
The app won’t let me stop the session, what do I do? Turn off your Sensors by pressing the button 4 times. Close the app. Turn on the Sensors and reopen the app. I am not at home, can I connect to another wiﬁ network? Yes, go to the settings section of the app and press WiFi. The app will scan for WiFi in the area, select your network, and enter the password. The app will conﬁrm when the WiFi connection has been made. If after three tries you cannot connect please email us at support@scorchedice.ca.
PAGE 4
Please contact support@scorchedice.ca My base plate fell off my skate, what do I do? Please contact support@scochedice.ca How do I charge my Sensor? Plug the USB side of the charge cable into a charging block in an electrical outlet. Align the magnets on the charge cable with the magnet on each of the Sensors. If you are getting resistance, turn the magnet on the charge cable 180 degrees. How do I know my Sensors are charging? Your Sensors will start blinking green when they are charging.
PAGE 5
My Sensors won’t turn on? Try charging your Sensors for another 30 minutes. Then hold the button for 5 seconds. If that does not work please contact support@scorchedice.ca How to attach the Sensor to my skate? Once your base plates are attached, slide the Sensor onto the baseplate from the inside of part of your skate and then, after you have tied your skates, secure the Sensors to the boot with the strap.
PAGE 6
Can more than one person use the same set of Sensors? Unfortunately, in order to keep your data and skating analysis accurate and protected, each person requires their own set of sensors connected with their own Scorched Ice app. I placed an order through the website, when will my Scorched Ice Sensor arrive? You will receive a conﬁrmation email with a tracking number. If you have not received one please contact support@scorchedice.
PAGE 7
wireless transmitter employs a unit of measurement known as the Speciﬁc Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The highest SAR value for the EUT as reported to the FCC when worn on the body, as described in this user guide, is 0.11 W/kg. IC Certification Information: Contains: IC: 8407A-M4SB This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
PAGE 8
La norme d’exposition pour l’émetteur sans ﬁl utilise une unité de mesure connue sous le nom de taux d’absorption spéciﬁque, ou SAR. La limite SAR ﬁxée par l’IC est de 1,6 W / kg. La valeur SAR la plus élevée pour l’EUT signalée à l’IC lorsqu’elle est portée sur le corps, comme décrit dans ce guide de l’utilisateur, est de 0.11 W/kg.