User's Manual

Dec 2, 2022

Scorched Ice Inc.

To Whom it May Concern:

Below is the dotted line is the content from the Smart Skates product model SMSK

v2.1 User Manual RF Certification web page:

https://support.scorchedice.ca/RFcertification

This web page can also be accessed by scanning the QR code on the RF Cert Label

on the product.

Regards,

Brian Macdonald

Project Leader

Scorched Ice Inc

403.991.1018

—------------------------------------------------------------------------------------------------------------

RF Certification Information

Scorched Ice Inc

Model: SMSK V2.1

Made in Canada

FCC Certification Information:

Contains FCC ID: XF6-M4SB

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.The RF energy exposure standard for a

wireless transmitter employs a unit of measurement known as the Speciﬁc

PAGE 1
Dec 2, 2022 Scorched Ice Inc. To Whom it May Concern: Below is the dotted line is the content from the Smart Skates product model SMSK v2.1 User Manual RF Certification web page: https://support.scorchedice.ca/RFcertification This web page can also be accessed by scanning the QR code on the RF Cert Label on the product. Regards, Brian Macdonald Project Leader Scorched Ice Inc 403.991.
PAGE 2
Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The highest SAR value for the EUT as reported to the FCC when worn on the body, as described in this user guide, is 0.11 W/kg. IC Certification Information: Contains: IC: 8407A-M4SB This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.
PAGE 3
La norme d’exposition pour l’émetteur sans ﬁl utilise une unité de mesure connue sous le nom de taux d’absorption spéciﬁque, ou SAR. La limite SAR ﬁxée par l’IC est de 1,6 W / kg. La valeur SAR la plus élevée pour l’EUT signalée à l’IC lorsqu’elle est portée sur le corps, comme décrit dans ce guide de l’utilisateur, est de 0.11 W/kg.