Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet The BGM111 is a Bluetooth® Smart module targeted for Bluetooth Smart applications where good RF performance, low power consumption and easy application development are key requirements. At +8 dBm TX power BGM111 has best-in-class RF performance and can provide long range, robust Bluetooth Smart connectivity.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Feature List 1. Feature List The highlighted features are listed below. Bluetooth Features • Bluetooth 4.1 Compliant • Software Upgradable to Bluetooth 4.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Ordering Information 2. Ordering Information BGM111A256V1 (orderable part number) is the product code for a pre-production (non-certified) version of the Module based on rev A2 SoC. This (V1) product code is updated to production version (V2) when the logos of the official CE and FCC certifications are marked into the Module’s metallic RF shield and the SoC used inside the Module is in mass production.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Interfaces 3. Interfaces This section describes the features and functionalities of the interfaces and peripherals. 3.1 USART The Universal Synchronous/Asynchronous Receiver/Transmitter is a flexible serial I/O module. It supports full duplex asynchronous UART communication with hardware flow control as well as SPI.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Interfaces 3.5 Real Time Counter The Real Time Counter is a 32-bit counter providing timekeeping in all energy modes and it is capable of providing system wake-up at user defined instances. The RTCC includes 128 bytes of general purpose data retention, allowing easy and convenient data storage in all energy modes. 3.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Antenna 4. Antenna This section contain design guidelines and recommendations for the BGM111 antenna. 4.1 PCB Design Guidelines For optimal performance of the BGM111, please follow the following guidelines: • Place the module at the edge of the PCB as shown in the the figure below. • Do not place any metal (traces, components, battery etc.) within the clearance area of the antenna. • Connect all the GND pins directly to a solid GND plane.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Antenna Figure 4.2. Poor Layouts for BGM111 Figure 4.3. Impact of the Size of GND Plane to the BGM111 Range 4.2 Effect of Plastic and Metal Materials Do not place plastic or any other dielectric material in touch with the antenna. Any metallic objects in close proximity to the antenna will prevent the antenna from radiating freely.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Hardware Design Guidelines 5. Hardware Design Guidelines The BMG111 is an easy-to-use module with regard to hardware application design but certain design guidelines must be followed to guarantee optimal performance. These guidelines are listed in the next sub-sections. 5.1 Power Supply Requirements Coin cell batteries cannot withstand high peak currents (e.g. higher than 15 mA).
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Bluetooth Stack Software 6. Bluetooth Stack Software Silicon Labs’ Bluetooth Smart Software is a complete Bluetooth Smart software stack for the BGM111 Bluetooth Smart module. The software implements a full Bluetooth LE compatible stack and L2CAP, RFCOMM, SMP and ATT protocols along with any GATT based Bluetooth Smart profiles.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Host Interface 7. Host Interface This section contains information about the host interface available on the BGM111 module. 7.1 UART The BGM111 can be controlled over the UART interface as a peripheral to an external processor. In order for the communication to be reliable, hardware flow control signals (RTS and CTS) must be present between the host and the module.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Electrical Characteristics 8. Electrical Characteristics Table 8.1. Absolute Maximum Ratings Parameter Min Max Unit Storage temperature -50 150 °C VDD -0.3 3.8 V 5 V tolerant GPIO voltages -0.3 5.251 V Other terminal voltages -0.3 VDD+0.3 V Note: 1. 5.25 V or VDD + 2 V, whichever is less. Table 8.2. Recommended Operating Conditions Rating Min Max Unit Operating Temperature Range -40 85 °C VDD (when using internal DC/DC) 2.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Electrical Characteristics Logic Signal Characteristics Table 8.3. I/O Terminal Electrical Characteristics I/O Terminals Min Typ Max Unit VIL input logic level low 1.7 V ≤ VDD ≤ 3.6 V -0.3 ─ 0.3VDD V VIH input logic level high 1.7 V ≤ VDD ≤ 3.6 V 0.7 VDD ─ VDD + 0.3 V ─ ─ 0.2 x VDD V VOH output logic level high Vdd = 3.3 V, Ioh = -3 mA, weak driver 0.8 x VDD ─ ─ V VOH output logic level high Vdd = 3.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Electrical Characteristics Power-on Reset Min Typ Max Unit DAC output current range (range 3) 2 ─ 64 μA Total error (continuous mode) -1 ─ 1 % Total error (duty cycle mode) -2 ─ 2 % Settling time to 1% (range changed) ─ ─ 5 μs Settling time to 1% (step changed) ─ ─ 1 μs Power Consumption Table 8.7.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet RF Characteristics 9. RF Characteristics Table 9.1. Supported Frequencies and Channels Parameter Min Max Unit Frequency 2402 2480 MHz Table 9.2. Typical Receiver Sensitivity Packet type LE -40 °C 20 °C 85 °C Unit TBD -92 TBD dBm Table 9.3. Transmitter Output Power at Maximum Setting Modulation type Min Typ Max Unit LE +6.5 +8 +9 dBm 9.1 Antenna Characteristics Table 9.4.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet RF Characteristics 9.2 2D Radiation Pattern Plots Figure 9.1. Typical 2D Radiation Pattern – Front View Figure 9.2. Typical 2D Radiation Pattern – Side View silabs.com | Smart. Connected. Energy-friendly. Rev. 0.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet RF Characteristics Figure 9.3. Typical 2D Radiation Pattern – Top View silabs.com | Smart. Connected. Energy-friendly. Rev. 0.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Pinout 10. Pinout This section contains a description of the BGM111 pin-out. Each pin may have one or more functions which are all listed in tables. The pin-out is shown in the figure below. Figure 10.1. BGM111 Pinout (Top View) 10.1 Power, Ground, and Reset Pins Power supply, ground, and reset signal related pins are listed in the table below. Table 10.1.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Pinout 10.2 GPIO Pins The 25 GPIO pins of BGM111 module are organized into ports with up to 16 pins each. These GPIO pins can individually be configured as either an output or input. More advanced configurations like open-drain, open-source, and glitch-filtering can be configured for each individual GPIO pin.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Pinout GPIO Assignments Port Name PA PB PC 11 13 6 7 8 PD Port Pin 0 1 2 3 4 5 9 Pad Number 5 6 7 8 9 10 11 13 14 15 16 17 18 19 2 US1_RX MISO • • • • • • • • • • • • • • US1_TX MOSI • • • • • • • • • • • • • LEU0_RX • • • • • • • • • • • • LEU0_TX • • • • • • • • • • • TIM0_CC0 • • • • • • • • • • TIM0_CC1 • • • • • • • • • TIM0_CC2 • • • • • • • • TIM0_CDTI0 • • • • • • • TIM0_C
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Pinout GPIO Assignments Port Name PA PB PC 11 13 6 7 8 PD Port Pin 0 1 2 3 4 5 9 Pad Number 5 6 7 8 9 10 11 13 14 15 16 17 18 19 2 PF 10 11 13 14 15 0 3 4 3Y • • • • • • • 4X • • • • • • • 4Y • • • 1 2 3 Comment 4 5 6 7 21 22 23 24 25 26 27 28 • END ADC0 1X • • • • • • • 1Y • • • • • • • 2X • • • • • • • 2Y 3X • • • • • • • • • • 3Y • • • • • • • 4X • • • • • •
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Physical Dimensions 11. Physical Dimensions Figure 11.1. Module Physical Dimensions Figure 11.2. Module Recommended PCB Pad Pattern silabs.com | Smart. Connected. Energy-friendly. Rev. 0.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Physical Dimensions Figure 11.3. Module Side View Dimensions silabs.com | Smart. Connected. Energy-friendly. Rev. 0.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Soldering Recommendations 12. Soldering Recommendations The BGM111 is compatible with industrial standard reflow profile for Pb-free solders. The reflow profile used is dependent on the thermal mass of the entire populated PCB, heat transfer efficiency of the oven and particular type of solder paste used. Consult the datasheet of particular solder paste for profile configurations.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Certifications 13. Certifications Note: Some of the certifications for the BGM111 Bluetooth Smart Module are pending. 13.1 Disclaimer Bluetooth specification and CE power spectral density requirements limit the absolute maximum TXP of Bluetooth LE devices to 10 dBm in all conditions. In FCC SAR testing is not required in any end product installation if the TXP is lower than 9 mW.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Certifications As long as the conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Certifications 13.5 IC IC (English) This radio transmitter has been approved by Industry Canada to operate with the embedded chip antenna. Other antenna types are strictly prohibited for use with this device. This device complies with Industry Canada’s license-exempt RSS standards. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Certifications Le module BGM111 a été certifié pour une intégration dans des produits uniquement par les intégrateurs FEO dans les conditions suivantes: • La ou les antennes doivent être installées de telle façon qu'une distance de séparation minimum de 15 mm soit maintenue entre le radiateur (antenne) et toute personne à tout moment.
Blue Gecko BGM111 Bluetooth® Smart Module Data Sheet Revision History 14. Revision History Revision 0.96 February 10th, 2016 • Ordering information updated • FCC and IC codes corrected. Revision 0.95 January 28th, 2016 • Certification status updated. • Current consumption figures added. • New block diagram. Revision 0.94 • Disclaimer section added to Certificates main section. • Technical specification tables TBD values edited partially. Revision 0.
Table of Contents 1. Feature List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1 USART . . . . . . . . . . . . 3 3.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) . . . . . . . . . . . 3 3.3 I2C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2 GPIO Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 11. Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 12. Soldering Recommendations . . . . . . . . . . . . . . . . . . . . . . . . 22 13. Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 13.1 Disclaimer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 13.2 Bluetooth . . . . . . . . . .
Smart. Connected. Energy-Friendly Products Quality www.silabs.com/products www.silabs.com/quality Support and Community community.silabs.com Disclaimer Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Laboratories products.